# 1
Curt Class I Drawbar - 5" Rise - 9-9/16" Long - 2,000 lbs
A little loose, noise but does the job.
The tow hitch on my daily driver (Kia Soul) is much lower than our other tow vehicle (1926 model T) Using this hitch allows us to tow with the trailer near level. Only important because it's a super light weight teardrop. It is not set up with a landing leg or levelers. So the trailer can only be used when hitched to a vehicle. It's two pieces of steel welded together with two holes drilled in it. As long as it doesn't fall apart it's excellent. E-trailer shipped quickly, no hassles! Sometimes it's not the product. It's the seller.
# 2
Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs
A little loose, noise but does the job.
The tow hitch on my daily driver (Kia Soul) is much lower than our other tow vehicle (1926 model T) Using this hitch allows us to tow with the trailer near level. Only important because it's a super light weight teardrop. It is not set up with a landing leg or levelers. So the trailer can only be used when hitched to a vehicle. It's two pieces of steel welded together with two holes drilled in it. As long as it doesn't fall apart it's excellent. E-trailer shipped quickly, no hassles! Sometimes it's not the product. It's the seller.
# 3
Curt Class II Drawbar - 5" Rise - 11-5/8" Long - 3,500 lbs
A little loose, noise but does the job.
I over measured my new trailer so there is a tilt to the trailer, I needed a 3" lift and ordered a 5" lift thinking i need the maximum by guessing , the trailer was level. Use a level if you want a level trailer. I,m a pinhead. Great product, they didn't know that I was a pinhead when I ordered so they sent me very quickly what i asked for. MEASURE MEASURE MEASURE
# 4
Brophy Drawbar for 1-1/4" Hitches - 5-1/2" Rise, 6" Drop - 7-1/4" Long - 3.5K
The item I ordered came in fast and was exactly as described. I will use them again.
I just purchased a new hideaway hitch system. But the hitch sits only 15 inches off the ground at best. And, my trailer coupling is 22-23 inches off ground. So l needed 7-8 inches of rise on the new 1.25 inch receiver system. Internet research took me to etrailer and the Brophy hitch. I got 5.5 inches with the Brophy hitch, the highest available for a 1.25 inch receiver I could find. The others are limited to 5 inches max. I added another 1.5 inches with your Curt shock absorbing hitch. Voila, with a combined 7 inches of rise and on level ground the trailer now rides perfectly level!!!! Both parts were very easy to connect. Delivery was speedy. Thank you for saving the day and my investment in an expensive new hideaway hitch!
# 5
Draw-Tite Drawbar for 1-1/4" Hitches - 5" Rise - 10" Long - 3,500 lbs
This is an excellent product. The packaging was superior as I had 6 other items shipped at the same time. Everything secured in one box so no rattling around or damage. The instructional video made everything easy to understand. When I came to a dead end I reviewed the video, picked up what I had missed and proceeded right along. Highly recommend.
Excellent product. Fits perfectly and securely.
# 6
Curt Drawbar for 1-1/4" Hitches - 5-3/8" Rise, 6" Drop - 5-9/16" Long - 2K
I used this on a 2014 Ford Fusion with a Reese receiver hitch made for my vehicle. Either the neck of the drop hitch is not long enough to get the ball a few inches away from the vehicle or the Reese receiver hitch sits too far under the vehicle.
Website was easy to use and order. Tracking the package was simple to follow and package arrived on schedule. Part works great
# 7
Channel Style Adjustable Ballmount - 2" & 2-5/16" Balls - 14,000 lbs
This hitch has worked out great for me over the last year. It’s very heavy duty and easy to adjust. I’ve hauled a 9,000 lb boat, long-distance on numerous occasions without issue. I also haul a landscape trailer on a daily basis weighing over 5,000lbs and haven’t had a single issue. Great hitch that was significantly cheaper than others and is very high quality. I’ve recommended it to several people and I wouldn’t hesitate to buy again. The only thing I would like to have now in a hitch is a tongue weight gauge, but it isn’t necessary.
This is a great hitch. Highly recommend this hitch. This is my second curt hitch, first one was on my ford f450 but unfortunately that one wouldn’t fit on my new truck, do to shank size.
What our customers are saying:
"Easy place to shop. Fast delivery and great products. Very happy with my purchase."