Most Popular Wheel Well Release for 2013 Dodge Ram Pickup

Very poor. I've ordered a b an w from you guys for my 2013 f150 and it's been great, and install was easy and quick! But I recently ordered and received one for my 2003 ram 2500 and its been a nightmare. The safety chain loops are way to wide for the wholes in the goose neck box. The pull handle takes all my might to open and close it. Nothing line up and it's just been horrible.

I have installed multiple b&w products at my shop. As always they are very high quality great instructions and work perfectly! Very pleased! This time it went on my personal 2013 ram 2500

Very poor. I've ordered a b an w from you guys for my 2013 f150 and it's been great, and install was easy and quick! But I recently ordered and received one for my 2003 ram 2500 and its been a nightmare. The safety chain loops are way to wide for the wholes in the goose neck box. The pull handle takes all my might to open and close it. Nothing line up and it's just been horrible.

I have installed multiple b&w products at my shop. As always they are very high quality great instructions and work perfectly! Very pleased! This time it went on my personal 2013 ram 2500

Very poor. I've ordered a b an w from you guys for my 2013 f150 and it's been great, and install was easy and quick! But I recently ordered and received one for my 2003 ram 2500 and its been a nightmare. The safety chain loops are way to wide for the wholes in the goose neck box. The pull handle takes all my might to open and close it. Nothing line up and it's just been horrible.

I have installed multiple b&w products at my shop. As always they are very high quality great instructions and work perfectly! Very pleased! This time it went on my personal 2013 ram 2500

I havnt towed with it yet, but this hitch seems to be very well built. Install was easy, I'm pretty handy and it took me about an hour and a half, would have been 45 minutes if I had a helper. Hardest part was my bed is bowed from use and the cross pieces were very snug between the bed and the frame.

No bolts came with hitch. Am going to have to buy them.

Very poor. I've ordered a b an w from you guys for my 2013 f150 and it's been great, and install was easy and quick! But I recently ordered and received one for my 2003 ram 2500 and its been a nightmare. The safety chain loops are way to wide for the wholes in the goose neck box. The pull handle takes all my might to open and close it. Nothing line up and it's just been horrible.

I have installed multiple b&w products at my shop. As always they are very high quality great instructions and work perfectly! Very pleased! This time it went on my personal 2013 ram 2500

The hitch works fine and was easy to install. Everything fit well with one exception. The rod that locks the ball in place from the wheel well is too short. I expect it is the wrong rod for the 2013 Ram pickup. I made an attempt to contact etrailer to get another, but failed to contact anyone. Can you put me in contact with someone who can assist me in getting a replacement?

Seems to be very well built. Shipping was very fast. Will definitely purchase other products.

The hitch works fine and I like it. 2 stars because the kit came with 2 driver's side frame brackets. etrailer and Curt could not figure out how to send me the part they shorted me on and I had to purchase another mount kit for one bracket. I would not recommend this product for that reason. I basically had to buy it twice.

I placed the order for this on a Sunday evening knowing it wouldn’t be processed till Monday. It said it would be delivered on Thursday and it was. The I received was completely destroyed with all the parts laying on one end of the box and all the supposed packaging torn up and the parts bag ripped open. After getting everything out of the box, I laid out the parts to see what was missing. There were 13 different pieces missing so was unable to put this in and I needed it to pull a trailer that weekend. I immediately called to let them know how the package arrived and that I was missing parts. After giving them the list, I said I would need them overnighted because I needed to use it this weekend. I was told that since it was free shipping that it was impossible to do and the would ship it out sometime next week and maybe get it by Thursday. This was the first time I ordered from this company and it will certainly be my last.

Very poor. I've ordered a b an w from you guys for my 2013 f150 and it's been great, and install was easy and quick! But I recently ordered and received one for my 2003 ram 2500 and its been a nightmare. The safety chain loops are way to wide for the wholes in the goose neck box. The pull handle takes all my might to open and close it. Nothing line up and it's just been horrible.

I have installed multiple b&w products at my shop. As always they are very high quality great instructions and work perfectly! Very pleased! This time it went on my personal 2013 ram 2500

Very poor. I've ordered a b an w from you guys for my 2013 f150 and it's been great, and install was easy and quick! But I recently ordered and received one for my 2003 ram 2500 and its been a nightmare. The safety chain loops are way to wide for the wholes in the goose neck box. The pull handle takes all my might to open and close it. Nothing line up and it's just been horrible.

EASY FAST INSTALLATION

Kit installed easily and fit perfectly. Instructions could have been better or included more pictures, but watching a few videos of similar installs online helped. Lost one star because the kit was missing an exhaust hanger bracket and a couple other pieces that were considered optional and fortunately not needed during my install.

Very poor. I've ordered a b an w from you guys for my 2013 f150 and it's been great, and install was easy and quick! But I recently ordered and received one for my 2003 ram 2500 and its been a nightmare. The safety chain loops are way to wide for the wholes in the goose neck box. The pull handle takes all my might to open and close it. Nothing line up and it's just been horrible.

I have installed multiple b&w products at my shop. As always they are very high quality great instructions and work perfectly! Very pleased! This time it went on my personal 2013 ram 2500

Very poor. I've ordered a b an w from you guys for my 2013 f150 and it's been great, and install was easy and quick! But I recently ordered and received one for my 2003 ram 2500 and its been a nightmare. The safety chain loops are way to wide for the wholes in the goose neck box. The pull handle takes all my might to open and close it. Nothing line up and it's just been horrible.

I have installed multiple b&w products at my shop. As always they are very high quality great instructions and work perfectly! Very pleased! This time it went on my personal 2013 ram 2500

Very poor. I've ordered a b an w from you guys for my 2013 f150 and it's been great, and install was easy and quick! But I recently ordered and received one for my 2003 ram 2500 and its been a nightmare. The safety chain loops are way to wide for the wholes in the goose neck box. The pull handle takes all my might to open and close it. Nothing line up and it's just been horrible.

I have installed multiple b&w products at my shop. As always they are very high quality great instructions and work perfectly! Very pleased! This time it went on my personal 2013 ram 2500

Get a turnover ball and don’t be the sucker I ended up. I laugh every time I think of the convenience I thought I was getting by not having to climb in the back of the truck. I don’t know if mine is defective or if this device is actually a workout program mixed with an anger management exercise in disguise. I’ve been using it for a year now, but within a month I developed a strategy for getting my trailer hooked up. First I climb into the back of the truck to cut the duct tape off I’ve used to attach the worthless rubber cap which falls off every chance it gets, filling the mechanism with whatever you have in your truck. If you ever plan to do anything with the bed of the truck besides pulling your gooseneck, haul hay, a four wheeler, anything dirty it will definitely jam your ball. After the tape is off I fight the first lever, I yank, turn, pull, twist, bang, swivel, dance this lever into the exact position. I climb under the truck and cover myself with wheel grease and scum getting the thing to unlock. Then the second lever, to lift and drop the ball. Repeat the steps of the first lever with less twisting, but add climbing into the bed with a hammer, banging the ball, climbing underneath, banging the lift arm, banging underneath, shaking, bouncing and sweet talking this POS into the upward position. Stop to spit curse and wipe the sweat out of your eyes and clean any wounds you got banging your knuckles. Now repeat the first lever steps AGAIN, including going under, going up, and under and in the wheel well so far you find whatever you ran over the other day that made you say “hmm” all over the front of your shirt. Repeat in opposite order when you want to put it down. I’m so embarrassed about this hunk of junk that I stop on the side of the road a half hour before I get to anything I’ve got to pick up just so no one has to see me cursing, crying and throwing a tantrum getting this thing in place. Please don’t buy this item, you don’t deserve this kind of punishment.

Nice solid unit that will definitely last a lifetime but even new this unit is not very user friendly. I have it installed on a 99 c/k3500. Installation of the unit was easy but the 2 levers for raising and locking the ball are not well designed. if you pull the left handle to far, the ball gets stuck in the down position and you have to crawl under the truck and push it back up. The right handle is supposed to somehow lock it into position but I have yet to figure out a reliable system for doing that. I had to shorten both handles to clear the rear tire and with the tire blocking the handles it is difficult and dirty to operate them and usually you smash your hands when the levers do finally go into place. The rubber cap is worthless and generally ends up bouncing out. On my 2nd truck, I went with the style you put the ball in by hand and it is a much easier unit to operate.

Very poor. I've ordered a b an w from you guys for my 2013 f150 and it's been great, and install was easy and quick! But I recently ordered and received one for my 2003 ram 2500 and its been a nightmare. The safety chain loops are way to wide for the wholes in the goose neck box. The pull handle takes all my might to open and close it. Nothing line up and it's just been horrible.

I have installed multiple b&w products at my shop. As always they are very high quality great instructions and work perfectly! Very pleased! This time it went on my personal 2013 ram 2500

Get a turnover ball and don’t be the sucker I ended up. I laugh every time I think of the convenience I thought I was getting by not having to climb in the back of the truck. I don’t know if mine is defective or if this device is actually a workout program mixed with an anger management exercise in disguise. I’ve been using it for a year now, but within a month I developed a strategy for getting my trailer hooked up. First I climb into the back of the truck to cut the duct tape off I’ve used to attach the worthless rubber cap which falls off every chance it gets, filling the mechanism with whatever you have in your truck. If you ever plan to do anything with the bed of the truck besides pulling your gooseneck, haul hay, a four wheeler, anything dirty it will definitely jam your ball. After the tape is off I fight the first lever, I yank, turn, pull, twist, bang, swivel, dance this lever into the exact position. I climb under the truck and cover myself with wheel grease and scum getting the thing to unlock. Then the second lever, to lift and drop the ball. Repeat the steps of the first lever with less twisting, but add climbing into the bed with a hammer, banging the ball, climbing underneath, banging the lift arm, banging underneath, shaking, bouncing and sweet talking this POS into the upward position. Stop to spit curse and wipe the sweat out of your eyes and clean any wounds you got banging your knuckles. Now repeat the first lever steps AGAIN, including going under, going up, and under and in the wheel well so far you find whatever you ran over the other day that made you say “hmm” all over the front of your shirt. Repeat in opposite order when you want to put it down. I’m so embarrassed about this hunk of junk that I stop on the side of the road a half hour before I get to anything I’ve got to pick up just so no one has to see me cursing, crying and throwing a tantrum getting this thing in place. Please don’t buy this item, you don’t deserve this kind of punishment.

Nice solid unit that will definitely last a lifetime but even new this unit is not very user friendly. I have it installed on a 99 c/k3500. Installation of the unit was easy but the 2 levers for raising and locking the ball are not well designed. if you pull the left handle to far, the ball gets stuck in the down position and you have to crawl under the truck and push it back up. The right handle is supposed to somehow lock it into position but I have yet to figure out a reliable system for doing that. I had to shorten both handles to clear the rear tire and with the tire blocking the handles it is difficult and dirty to operate them and usually you smash your hands when the levers do finally go into place. The rubber cap is worthless and generally ends up bouncing out. On my 2nd truck, I went with the style you put the ball in by hand and it is a much easier unit to operate.

Great product w great instructions. It was an affordable package that installed decently. We have used the hitch for a year now and have had zero issues w it. The only reason for not giving it 5 stars was because the cross bars that go between the frame rails needed to have the threaded holes chased w a tap to remove the powder coating prior to installation. I initially tried installing it without chasing the threads and the bolts started to get very tight before the parts even pulled together. Once the threads were clean, everything assembled very well. The hitch takes time to install, at least if you want it to look good and be correct. On a 1500 ram, you will probably need to install some form of helper spring or air bags to prevent the rear from squatting from the weight of the gooseneck trailer…the factory 1500 coil springs are not firm enough on their own.

I havnt towed with it yet, but this hitch seems to be very well built. Install was easy, I'm pretty handy and it took me about an hour and a half, would have been 45 minutes if I had a helper. Hardest part was my bed is bowed from use and the cross pieces were very snug between the bed and the frame.