Most Popular Hopkins for 2008 Jeep Wrangler

2018 wrangler unlimited Sport S. Without trailer wiring. Completed installation today. Used a 4 flat along with a 7 pin converter. Works and fit perfectly. Very hot day and work slowly and carefully. Very satisfied . Great folks at etrailer. Great products, great quality and prices. I'm a several time repeat customer and couldn't be more satisfied. 4 pin harness Was a 56407 and the 7 pin adapter was a 37185.

Click to Enlarge

Click to Enlarge

Lacking instructions

7 pin connector separated from cable. I was expecting that "Molded Cable" meant that the connector was fused to the cable insulation but instead, the two separated almost immediately after I installed it. It still works fine as the wires are connected securely inside the connector but with the outer covering pulled out like this, I don't think it will last very long.

Click to Enlarge

Çable good but after putting new 7way plug on truck cable wire colors did not match etrailers picture

I always look forward to working with etrailer. They sell quality products and provide “old school” customer service...Thanks!

Works, exact fit, high quality, coils tight so max of about 3.5’ perfect! Heavy duty wiring, great waterproof connections.

This adapter is wonderful! It continues to work like a charm, was easy to install, and the price was right. Needed it for hauling my boat trailer that has hydraulic brakes. It has made it through all kinds of Wisconsin and Minnesota weather on my Jeep Wrangler and will last like any other wiring part that is exposed to the elements. I highly recommend this to anyone looking to adapt 4 pole to 5 pole trailer wiring.

Great product! I have a Jeep Wrangler Unlimited that only has a four pole flat connector. I have a boat thats needs a five pole because it has surge brakes. This was the perfect solution. I just had the fifth wire connected to the back up light and plugged this five to four pole adapter that was already on the vehicle. Problem solved. It came quickly. I accidently ordered two and I got a call from Etrailer questioning my order. I thanked them and said I only needed one. They saved me the cost of the second adapter when most companys would have just sent them both- and charged me for two.

The items I ordered will allow me to adapt my utility trailer for transporting my sea kayaks. Curt and Hopkins are both quality manufacturers. On a shipping note, the box arrived at the Post Office broken wide open. Your shipping folks need to wrap small, heavy, items in bubble wrap. Then stabilize it with foam peanuts. Just putting it in a box then stuffing the box with craft paper does not cut it. Items were not damaged so I am good to go.

I have now installed the following on my 2017 Wrangler: Brake light relay kit . Hopkins Towed vehicle Tail Light wiring kit. Blue Ox base plate. Blue Ox Patriot Portable RF Braking System. All of this has taken about 3 days of work spread out over a week or so. Overall it went well. Not too many surprises. Crawling around under a car at 71 is a bit of a strain but I'll get over it. I must say that Donna P. has been a wonderful source of great information and has stayed right on top of the process. eTrailer has been a great source for this project. I would recommend you all with no hesitation.

Click to Enlarge

Click to Enlarge

Installed: 9/12/2013 Jeep Wrangler Unlimited Installation of the plug was a quick and easy. The existing Warrior hitch has a tab on the side for a trailer wiring socket. Drill a new hole on the installation bracket (comes with the trailer connector) so the bracket on the hitch matches bracket on the trailer connector. Done deal. This is the only trailer connector I found which has the 7, 5 and 4 connector options. Flexibility is always a good idea when you are borrowing someone else trailer or renting.

Click to Enlarge

the perfect plug for mt Wrangler tj

Product shipped quickly and was exactly as described. It mounted to my Wrangler in just a few minutes of work.

Quickly shipped and great value. Very easy to mount and saves time by having two plugs available and not having to switch when using round plug. Great seller and very good product.

Well I wasn't able to use this as there was no good place to install on my car without it practically dragging. Not a product problem at all. I tried to return and customer service was fast and super helpful... unfortunately return shipping would eat up any refund. So.. I get to keep it. good quality and product. Very happy with it and wish I could use it. Will keep it for sometime in the future when of course I will need it.

I bought this socket for my 2006 Volvo Xc90 to wire in the 4-Pole harness I also purchased from etrailer. Already had a few 7 Blade to 4-Pole adapters from my previous vehicle, and wanted the option of adding a trailer brake wire for a small camper later on so that was the main reason for the purchase. It also went very well with the Hidden Hitch I had already installed, bracket mounted right up to the existing tabs on the hitch. Super quick and easy install, as all of my etrailer purchases have been. Looks great on the truck, and functions great with the 180 Degree cover.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Nice

Only gave 4 stars because it was a bit confusing. I have a lot of auto wiring experience; from car stereos,amplifiers and all manner of accessories. All of the info on etrailer indicated that the color coding didn't match up. So I went into it disregarding the standard color coding, when in fact it was just as it should be.

Love the test option on this

We had been having trouble with our other adapters, no brakes or intermittent brakes. This adapter fits better than any of the others ever have, great connection and is holding tight. I will be picking up some more of these. The only downside to me was they came on the value shipping which is rather delayed for us and I would rather pay to get it here more quickly. I was needing it and it was several days getting here. We ship a lot and I know shipping directly with USPS goes faster than that and is not expensive.

Added the gooseneck trailer plug in bed and I wanted to be compatible with new and old style plugs. Adapor worked great.

Overall, I was very impressed by this connector. I used it as an in-bed connector for my gooseneck trailers. The plug seems to be a quality product, engineered to stand up to some abuse. I like how the mounting bolt heads recess into the connector and also how the bottom of the connector is elongated to help support the weight of the plug and wiring. I think it has a great shot at lasting for a very long time. The hinge is predominately plastic that will not corrode and break like the many I've had in the past.

Click to Enlarge

This product was exactly what I needed to complete the wiring connections between the RV and Jeep Wrangler. Comes with easy instructions and mounting hardware.

appears to be of good quality. Will have a chance to install next week

The adapter works great! I used it the day that I got it. I have an 18' car trailer that I just needed to take down to get a VIN inspection and I wanted to use my Jeep Wrangler because it's so easy to maneuver the trailer. I plugged the 7 blade from the trailer into the adapter, plugged the 4 wire flat into the Jeep, connected the ground wire, and the lights and turn signals all worked fine!!!!

It took awhile to receive my order, but I was informed by e-mail and was kept informed when I should expect delivery. Luckily, was in no rush, so I would reply and wait for an update from you. i received the connector in good condition. Thank you!

fits the plug perfect....just got a goldwing used, haven't had a chance to ensure it (the bike) was wired correctly for a trailer. no fault of the product, just wish its wireing was a bit long due to the way the plug was intigrated into the underside of the tour trunk.

Click to Enlarge

Works great! Took a few minutes to figure out the rv side and get it set up so the round RV part Correlated in the correct way to the standard four flat wiring. But it went smoothly.

My '92 GMC Sierra had a 6-pin trailer harness connector and I'm going to be pulling a pop-up camper in a few weeks that has a 7-pin connector. I originally ordered a 47435 6-Pole to 7-Pole Trailer Wiring Adapter. After thinking about it for a day I changed my mind and ordered a HM48470 Hopkins Endurance Multi-tow 7-way, 5 & 4-wire Flat Connector to mount in the bumper and a HM47570 Hopkins Endurance Multi-tow Connect Adapter - 7-way To 6-way, 5-way and 4-way. The HM48470 will allow me to pull the pop-up as well as giving me the 4-wire flat connector that I need for my boat trailer. I bought the HM47570 adapter just to cover all the trailer wiring needs I might run into. I really like the fact that the 47570 adapter has the quick change plug to cover both wiring arrangements for 6-pin trailer connectors. I placed the original order Saturday evening and the second order Sunday afternoon. Monday morning, I called etrailer.com to try to cancel the first order and was told that both orders were already boxed and on the way the shipper. I had no idea that they had people there to pull and box orders on the weekend. I asked about returning the first order when it arrived and was told by Helen M that it would be no problem at all. I have been extremely pleased with my purchase experience with etrailer.com. Everyone I spoke with there was very knowledgeable and I will not hesitate to go directly to them for my trailer and towing needs in the future.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

I needed an adapter for my electrical towing harness so the that I could use a 5-Way connector on my 7-WAY plug. On line, I found and ordered Item No. HM47570 "HOPKINS ENDURANCE MULTI-TOW CONNECTOR ADAPTER - 7-WAY to 6-WAY, 5-WAY or 4-WAY." When I received the product, I was really stoked, it was exactly what I needed and what I had been looking for! I tried it on for "size" as you might say and it's going to work like a charm. I will send some photos later when I'm done with the installation! No time right now. . this coming weekend! Photo 1&2 my connector; Photo 3&4 the new HM47570; Photo 5,6,&8 the light bar I wanted to install and the completed project. Thanks a bunch!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Worked out pretty good. Had a hard time figuring out just how to attach it. I ended up just zip tieing it. It was a life saver that I could pull the rear plug apart. Made it possible to slide part of the harness thought a tight hole.

Click to Enlarge

Got this to replace the poorly constructed plug that came with the 7pin wiring kit. That plug broke at the spring hinge the second time I used it. Surprised that Hopkins didn’t include “Butt Connectors” though. Seems a little nickel dimeish. Had a good experience with Paul who refunded their price for the defective Kit plug as well as refunding the price difference for the wiring kit which had gone from $110 to $48. Overpriced to begin with but convenient. Paul did real good dealing with a pissed off Old Guy

I rewired my light bar for my boat trailer with the items I purchased. Before I built the the light bar, every time I used my boat trailer I would waste valuable sailing or fishing time repairing faulty lights. The do not last long when you submerge them in salt water. This light bar now version 3.0 have given little trouble over the years

Click to Enlarge

Click to Enlarge

Great product. Works well when I had a broken connection on my 4 way plug end on my light-up hitch cover I bought from y'all a while back. Always a happy customer. Thanks, George.

Click to Enlarge

I am enclosing 2 photos of trailer connector I purchased from etrailer. I have a 1995 Dutchman popup trailer. It had a 6 way round connector which would not fit my 2010 F150. By using your trailer connector diagrams, I was able to determine Dutchman was using white for the ground, blue for brakes, black for battery, brown for right turn/brake, red for left turn/brake, and green for tail lights. I replaced the 6 way with your 7 way connector.

Click to Enlarge

Click to Enlarge

Quality built product. This connector seems to take less effort to plug in to the 7-flat socket than others that I have installed. Metal housing provides great rigidity. I appreciate that they include the clip to stow the connector when not in use. If I could improve on it, I would prefer the manufacturer find a way to design the inside to be less obstructive to the 7 wires that have to pass through the middle. I use heavily insulated 7-wire harness, and had a difficult time squeezing everything in to the provided space. All said and done, very happy with the product and I do play on purchasing again next time I need another. I would recommend this to any professional installer. My application is 5 different trailers that include surge and electric brake assemblies in a fresh water marine environment on multiple types of vehicles. This produced is plugged and unplugged almost every day.

I used this harness to rewire a 10ft vintage RV. There was plenty of length to reach the rear lights. I used Scotch Locks to tap into the wiring for the side running lights. Very good product.

Click to Enlarge

Very happy with every aspect of my order. Received product and quality appears to be outstanding. I’m especially impressed at the instructions made available to install the wiring harness, written with the product and link for video. All bases covered and follow up to make sure all goes well. Am confident of their assistance should I need it.