Most Popular No Offset for 2006 Chevrolet Silverado

B&W Companion. American made product! Very high quality. What a peace of mind knowing what my 5th wheel trailer is connected to.

Got 5th wheel in a timely manner and was exactly was what I ordered.

The shank slides right in. The thing I noticed is there is small rubber bumpers on the bottom of the rails but they don't actually touch the bed. If I had a spray on liner it would probably ride on there better

Perfect! Let's me use my Reese 5th wheel hitch that I have had for 15 years and three moves, FINALLY!! Both of my one ton trucks have B&w bed hitches, so I got two for one with the Curt adapter!

B&W Companion. American made product! Very high quality. What a peace of mind knowing what my 5th wheel trailer is connected to.

Got 5th wheel in a timely manner and was exactly was what I ordered.

Very easy to install and the directions were very easy to understand and follow.

I returned it, because it was going to change the structural integrity of my 5th wheel camper. Did not use the product.

Very heavy duty hitch. Installation was a breeze. Took maybe 5 minutes. The only complaints that I have is A.) you have to paint it and B.) the square plate was welded onto the tube crooked. No big deal it won't affect the function it just looks odd. Don't get me wrong I would definitely buy this again. Now I don't have to take out my 5th wheel hitch to use my gooseneck trailer.

A lot easier to hook that gooseneck

This product is spot on, I installed it immediately and have used it twice. This product was an awesome option to purchase because of already having the B&W turnover ball system. This gave me the ability to install and the Curt Q24 slider to give the maneuverability needed when pulling a fifth wheel with a short box that the Anderson hitch did not provide. I have already used the slider option twice, it works flawlessly. Prior to the purchase of this Demco I purchased the Curt X5. The X5 did not work with my truck at all. The X5 did not even make contact with the bed of the truck for support. This Demco base to rails fits tightly to the bed of the truck. I have 2007 Dodge 3500. It is a short box mega cab.

Click to Enlarge

Click to Enlarge

Does exactly what is is built to do. I pull a 42’ fifthwheel that weighs 18000# with no hesitation anywhere. As always very happy with product and ther staff at etrailer. I will continue to use you for all my needs. Thank

Love this adapter. Works great on my Rota-flex kingpin and my B&W gooseneck ball. Lesson learned, re torque the primary clamping bolt after the weight of the trailer is on the hitch. I had it loosen up on me without realizing and the hitch rotated slightly in the bed while towing. After learning this it has never happened again.

Love my 5th wheel hitch! Would suggest it to anyone!

The shank slides right in. The thing I noticed is there is small rubber bumpers on the bottom of the rails but they don't actually touch the bed. If I had a spray on liner it would probably ride on there better

I use this on a 3500 Silverado which come with an original spray on bed liner. This makes my fifth wheel adapter very hard to hook to the goose-neck hitch. I virtually have to undo the main bolts and then torque them again after the adapter is hitched. Upon my complaint, I was told to simply cut out the bed-liner???? Imagine!!!! Once mounted, the fifth wheel hook up work just fine. I am lucky to own a pneumatic impact gun though....

Very stout and well built product !!

Click to Enlarge

Click to Enlarge

Click to Enlarge

ok i am a welder by trade. the welds on this have a lot to desire but should hold ok would have been nice if it had been painted easy fix though overall it will do the job i needed it for

B&W Companion. American made product! Very high quality. What a peace of mind knowing what my 5th wheel trailer is connected to.

Got 5th wheel in a timely manner and was exactly was what I ordered.

ok i am a welder by trade. the welds on this have a lot to desire but should hold ok would have been nice if it had been painted easy fix though overall it will do the job i needed it for

Very stout and well built product !!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Looks great well built but holes for adjusting are to small for my application.

Very stout and well built product !!

Click to Enlarge

Click to Enlarge

Click to Enlarge

The shank slides right in. The thing I noticed is there is small rubber bumpers on the bottom of the rails but they don't actually touch the bed. If I had a spray on liner it would probably ride on there better

Everything arrived in perfect condition. With a little trim of the bed liner the adapter fit perfectly as described. My Curt A-16 hitch looks great paired up with the gooseneck adapter. Ready to hit the road!

Very stout and well built product !!

Click to Enlarge

Click to Enlarge

Click to Enlarge

ok i am a welder by trade. the welds on this have a lot to desire but should hold ok would have been nice if it had been painted easy fix though overall it will do the job i needed it for

Very stout and well built product !!

Click to Enlarge

Click to Enlarge

Click to Enlarge

ok i am a welder by trade. the welds on this have a lot to desire but should hold ok would have been nice if it had been painted easy fix though overall it will do the job i needed it for

I had borrowed an adapter from someone. It was the same as the one I purchased from you. I made several trips pulling a four horse goose neck trailer with no problems, so I decided to purchase an adapter of my own.

Fantastic service and follow up

Very heavy duty hitch. Installation was a breeze. Took maybe 5 minutes. The only complaints that I have is A.) you have to paint it and B.) the square plate was welded onto the tube crooked. No big deal it won't affect the function it just looks odd. Don't get me wrong I would definitely buy this again. Now I don't have to take out my 5th wheel hitch to use my gooseneck trailer.

A lot easier to hook that gooseneck

Very heavy duty hitch. Installation was a breeze. Took maybe 5 minutes. The only complaints that I have is A.) you have to paint it and B.) the square plate was welded onto the tube crooked. No big deal it won't affect the function it just looks odd. Don't get me wrong I would definitely buy this again. Now I don't have to take out my 5th wheel hitch to use my gooseneck trailer.

A lot easier to hook that gooseneck

Very stout and well built product !!

Click to Enlarge

Click to Enlarge

Click to Enlarge

ok i am a welder by trade. the welds on this have a lot to desire but should hold ok would have been nice if it had been painted easy fix though overall it will do the job i needed it for

Very stout and well built product !!

Click to Enlarge

Click to Enlarge

Click to Enlarge

ok i am a welder by trade. the welds on this have a lot to desire but should hold ok would have been nice if it had been painted easy fix though overall it will do the job i needed it for