# 1
No-Drill Mount for Electrical Mounting Bracket - Short
Package had hitch protruding out of cardboard. The wiring harness wire for the right side were short and I had to splice 3 wires to those that were short. The plug adapter was cheaply made. [online] guy said hitch could be installed with a floor jack. I would like to see him try it. Hitch appears to be of good quaility.
Came with beat up box. I already expected the hitch will be damaged, but it was worst than my expectation. It looks like the hitch was previously returned item, so it is not a new item and somebody put an effort painting the hitch to make it look like brand new, but the paint was not even and oversprayed. I did not bother opening the other box because I am already disappointed. I am returning the hitch including the accessories for the hitch.
# 2
Good sturdy bracket. The holes did not line up with my 7 way electrical connector. I fixed it by drilling new holes and now everything is attached securely.
This did not fit the factory connector despite etrailer's recommendation of it. My mechanic was able to modify the factory bracket to fit the hitch at a reasonable cost. When I tried to return the item etrailer would not provide a shipping label because the shipping cost was more than the item cost. I asked for a credit and they would only provide one if I returned the item at my expense.I found this to be unacceptable and will no longer do business with them. They are a definite outlier on this, in my experience.
# 3
2019 Outback Limited 3.6 Just completed installation of Echo stealth hitch, Curt 4 way T connector, 4 to 7 way universal trailer brake controller kit, and Redarc Liberty brake controller. This was a fun and very straight forward project. The Etrailer videos were awesome. I took my time and knocked it out a couple of hours over 3 days. Im recently retired so no rush. While awaiting shipment I poked hole through rubber grommet inside engine bay. I then pushed a 3ft length of 1/4" drip irrigation tubing through to pull future brake controller wires into cabin. I had ordered the Curt 4 way T connector earlier so instalked that as well. Videos were great and made finding plug n play connection super fast and easy. Once parts arrived, I instalked Echo hitch and universal 7 way adapter kit. I picked up a torque wrench at Harbor Freight for $30 which worked great. I needed one for tightening tugs anyway so it was great timing. I ran the 7 way wiring down passanger side under plastic shield. It was easier than anticipated and virtually invisible. Most videos show mounting inline fuses near battery. With my 3.6 the passabger side was wide open so I opted to mount the fuses there. This required a trip to Home Depot for an additional 14 ft of 10 guage wire. This was used to run hot 2 wires from 40amp/29amp fuses to battery($9.00). Turns out that the irrigation tubing is the exact size for covering anchor bolts on inline fuse. Probably dont need them but keeps everything safe from accidental arching is crossed. I taped together the white trailer brake wire running from back and the 20 amp output black wire from 20 amp fuse to the piece of drip tubing I previously pushed through gromnet. I added a touch of white grease and it slid through grommet like butter. The final day I instalked Redarc controller. Installation is fairly straight forward especially after knocking out the dirty parts of install. Honestly the most troublesome part of the entire project was identifying the cold brake pedal wire. These wires are minute. The key is having the right tools which I did not. Purchase a hook probe circuit tester and save yourself all the frustration. I watched many videos and there were multiple answers as to which wire is the correct wire. Dont guess or take soneones advice, verify. A hook probe tester like the instalkers use is worth $20. I ended up dropoing by my local uhaul that does custom hitch instalkations. Base labor price $60 which was totally worth it at that point. I saved a lit of $ DIY so I had the pro identify and connect controller to proper brakewure activated when pedal is pressed. I had it all open for him so he only charged me $20. Thank the Lord he was an honest cool guy. After completing instalkation and powering up system the Redarc had no lights whatsoever. I calked Redarc and they had me check for power at black wire on input side, all good. I then disconbected both sides of controller, multi rmwire side and control knob side. After reinstalling the blue led indicator light fired up. Everything is back in place and working great. I dont have our trailer yet, but purchased a 4 way and 7 way tester and all systems are ready for launch! I ended up mounting the control knob onto the fuse cover lid on left dashboard. This was just easy and simple. Added some tacky strips to hold cover securly. This was a fun project and etrailer made it super easy. Items were delivered quickly and great quality. etrailer is my go to stop for everything towing.
Sorry Carol, I had to modify the long bracket in order for it to work on my 2020 Ford Edge Titanium.
# 4
Replacement Long Mounting Bracket for Thule Spare Me Bike Carrier
I had a good first experience with etrailer. At first I bought the wrong part because my jeep tires were very big. But they were good to work with in getting me what I needed.
I highly recommend etrailer.com for their excellent customer service. I spoke with Jean very late in the day about two parts needed to make my Thule bicycle rack compatible with the larger spare tire on my jeep. She went beyond the call to get it shipped on the same day, and it arrived sooner than expected. I was able to get the parts installed with relative ease and am one happy customer. Thanks!
What our customers are saying:
"WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!"