# 1
Pollak 7 Pole to 4 Way Connector Adapter
I wanted one with a LED tester built into it to "trick" my SUV into thinking I had a trailer connected when really it was just a bike rack so the car didn't slam in it's brakes while reversing thinking it was something else. So I bought a different adapter. The picture slightly deceived me into thinking this had LED tester because the plug is attached by a rubber string (that I thought was a wire). So add another picture of the other side and that would eliminate my confusion. 4 stars because it probably works the way 99% of people would want to use it for.
Everything worked out well. On time and fits perfect. Attach hitch setup and my new Ridgeline. It comes with a 2" inch receiver and I have a full compliment of 1.25. stuff from my previous car. All from etrailer i must admit! so I needed the 2-1.25 reducer, a good lock, and the 7-4 reducer for my goodies! Thanks for the grest service
# 2
Adapter 4 Pole to 7 Pole Vehicle End Trailer Connector
This product works as expected. There is not too much to the installation, just plug it in properly and mount the ground wire. I did not find an easy way to mount this to my wife's Odyssey, or to the trailer hitch (item# 75270). Luckily, I do prototype design and manufacturing. So I came up with my own solution. I designed and made my own bracket to mount the 7 pole to the trailer hitch. It works like a charm, and looks great!
i had to replace these two items as my dear daughter went down our goat path driveway too fast. they replaced the originals from etrailer from the prior year. shipping is timely and customer service actually helps! i wired from battery to controller to hitch myself, and everything fit.
# 3
Pollak Trailer Connector Adapter - Vehicle End - 7-Pole Round to 7-Way Blade
I received this item in a plastic bag, for a few moments i wondered if it was a knock-off. I had done my home work and was sure that this item would be compatible with the socket on my John Deere 2013 5085M at the time I ordered it, not so. The 'holding ridge' at the plug-in end was not in the right position when fully inserted into the plug on the tractor. I sent multiple pictures to Pollack Technical Support but they were unable to assist me. I finally modified the item myself (something I really hate to do) so that it would fit the plug-in and be 'grasped' by the cover/holder on the tractor side. As I anticipated, the thickness of the plastic was inadequate to make the adaptation 'sweet', so I had to cover the resulting hole with silicone caulk.
This is a great solution for adapting RV blade connector to 6 pole connector. I give it 5 stars. I use this for work purposes, and have found one issue that I DON'T believe to be manufacturer defect. In my industry we use different trucks and trailers daily, if not hourly. Some trailer electric brakes will lock up when adapter is connected. I have found the red wire in the adapter to be the problem. My solution was to splice in a switch so that when the intermittent problem arises I can flip the switch and be on my way.
# 4
48" Car and Trailer End Loop 4-Pole
As always,they had what I needed, good price, fast shipping.....and a video about how to use it. My go to place.
This wiring extension will do very nicely. I have a trailer with removable tongue.
# 5
E-trailer: they've got what I need at a reasonable price. This is what e-commerce should be!
I received the product after just a few days. I had many technical questions that were answered by a competent service person. The product arrived in great shape and I had reviewed their installation video so installation went very quickly and easy. My 2011 Chevrolet Silverado is equipped with a 7 pole connection so I bought their adapter to convert to flat 4 pole connection. That an the CR-017 led worked very with first try. I also bought the trailer hitch lock at the same time. All products are very easy to use.
# 6
Hopkins 4-Pole Loop - 12" Long
Perfect product for my needs. My 4 pin is hiding under a cover on my bumper, so I used this device to plug into the vehicles 4 pin and allow the extension to hang below the bumper. Now I can quickly plug in to the adapter without taking a panel off. Cheap easy fix for a great deal of convenience!
I had purchased a Pro Series Cargo Carrier 63153 and the 20174 light kit. Assembly was very straight forward but I found that the 4-pole connector harness was too short. This 12" extension was perfect. Also, Jonathon at etrailer provided excellent customer support getting it to me while on a trip.
# 7
Hopkins Heavy-Duty Trailer Coiled Wire Adapter for 7-Way to 4-Wire Flat
Works, exact fit, high quality, coils tight so max of about 3.5’ perfect! Heavy duty wiring, great waterproof connections.
Item was just as I anticipated. It looks good, works great, and the delivery was as promised. E Trailer is a good place to do business.
# 8
60" Car and Trailer End Loop 4-Pole
Thank you so much for having videos to show how to install the items I buy.too cool
Just what I needed, Thank you.
# 9
48" Long 4-Pole Loop with Cover
The items I ordered will allow me to adapt my utility trailer for transporting my sea kayaks. Curt and Hopkins are both quality manufacturers. On a shipping note, the box arrived at the Post Office broken wide open. Your shipping folks need to wrap small, heavy, items in bubble wrap. Then stabilize it with foam peanuts. Just putting it in a box then stuffing the box with craft paper does not cut it. Items were not damaged so I am good to go.
I have now installed the following on my 2017 Wrangler: Brake light relay kit . Hopkins Towed vehicle Tail Light wiring kit. Blue Ox base plate. Blue Ox Patriot Portable RF Braking System. All of this has taken about 3 days of work spread out over a week or so. Overall it went well. Not too many surprises. Crawling around under a car at 71 is a bit of a strain but I'll get over it. I must say that Donna P. has been a wonderful source of great information and has stayed right on top of the process. eTrailer has been a great source for this project. I would recommend you all with no hesitation.
# 10
Hopkins Endurance Flex Trailer Connector Adapter w/ LED Circuit Tester - 6-Pole to 4-Pole
Choosing the correct connector for my pop-up camper and F 150 baffled me before I asked etrailer for help. I got that help, bought the etrailer connector, and it worked like a charm. The lube that came with the connector was an unexpected bonus. Many thanks.
I was very glad to find this adapter so I can hook my bumper pull trailer to the wiring that is already in place for the gooseneck. Easy to order, delivered fast. Problem solved. Thanks
# 11
Mighty Cord Trailer Connector Adapter - 4-Way Flat to 7-Way RV Style - 12" Long
This is my second order with etrailer. Both experiences with your company have been very positive. The knowledge and friendliness -along with following up on orders and satisfaction have been much appreciated. Brittany, the customer representative, is a huge asset to etrailer.
Exactly as described and what I needed. Delivered quickly.
# 12
Mighty Cord Trailer Connector Adapter - 4-Way Flat to 6-Way Round - 12" Long
Worked exactly as I expected. I’m setting up my Jeep to flat tow it behind my camper.
# 13
Adapter 6-Pole to 7-Pole Trailer Wiring Adapter
I was needing a trailer wiring adapter for my 2001 Dodge 1 ton with DewEze bale bed which has a 6 pin round electrical plug and my PJ trailer has a 6 pin flat plugin connector. I could not find one locally and nobody had any knowledge about these. I found etailer website but needed help figuring out what adapter I needed, Jameson C replied to my email with information I needed. Placed my order and received adapter in 3 days. Plugged it into truck and trailer and it works great. Thanks Jameson C and etrailer. Very good customer service. Good price and received quickly. Will definitely be a repeat customer.
Excellent solution to transition without having to install new connection. Huge Savings. Bookmarked etrailer.com for all my trailer shopping needs. Super fast delivery. 5 Stars
# 14
Adapter 7 Pole to 5 Pole Flat Wired Adapter
Well made. Great extension from truck to my boat. Adds an additional 20" of wiring
Nice adapter for my rv to motorcycle trailer. Easy to use and works great.
# 15
Hopkins Trailer Connector Adapter - 7-Pole Round Pin to 6-Pole
Perfect. Fit the plug in my '86 F-250 Camper Special & converted it to the round 6 easy. The man that installed the old round 7 plug had wired it differently to accommodate non-integrated tail lights/brake lights on his application, however, referring to the Hopkins website for the illustrated wiring diagrams & comparing them to what was on the truck, I was able to quickly correct the wiring for my standard application. Couldn't be happier with the build/fit/availability of the adapter & e-trailer sent it quick so it was here in time to use it the following weekend as planned.
etrailer is great! Prompt, knowledgeable, courteous service. I received my order ahead of the projected delivery date. Jessica in Customer Service was especially helpful. I will definitely do business with etrailer again!
What our customers are saying:
"Your internet site is very well organized and easy to use...My order was shipped very promptly and included everything I ordered...All in all this was a simple procedure for what can be a complicated order. I would use your company again or recommend you to others. Your selection was broad and your prices fair."