# 1
Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches
Coming in at about 45 pounds, the D900 Curt Multi-Ball Adjustable Ball Mount is a BEAST! I purchased for use with my '08 Expedition towing either a small utility trailer w/ 1 7/8" ball or my DooLittle Bullitt cargo trailer w/ 2" ball. I needed 5 inches of drop (at least) for both. This is just about the only economical mount in which to accomplish this. Most if not all two ball mounts are 2" and 2 5/16" balls. Many reviews comment on the length that this mount sticks out and initially that was a concern of mine. Please see the Q&A of the D900 product page to address those issues. Short story: A hollow/tubular extension shank of (about or greater)15" reduces vehicle hitch capacity by 50%. The D900 shank and other components are SOLID steel. No reduced capacity. Specifically in my case; this extra length will allow me some personal maneuvering room when hooked up to the DooLittle and raising the lift gate of my Expedition. Clearance between raised lift gate and cargo trailer was about two inches using my old shank, and I should about double that. The anti-rattle tightening bolt is a nice touch. This is my first Etrailer purchase, but not my last.
VERY sturdy piece of hardware here. I was worried it might be a little flimsy piece of metal. Not so, this is a substantial hunk of engineering and I feel safe putting anything on the back of my Expedition! Fully adjustable and easy to install, just like it says!
# 2
Flash Secure Adjustable 2-Ball Mount w Chrome Balls - 2" Hitch - 6" Drop, 7" Rise
Very strong, easy to install and very secure. Yes a bit pricey, but well worth the money. I did notice there was what I thought was an unusual amount of play in the receiver. I called etrailer and Marcia was so very helpful and very concerned that I may have received the wrong product. She even called the manufacturer and found out what the changes that were made by the manufacturer which made the pictures incorrect. My hat is off to Marcia and all the folks at etrailer
ball mount fits loosely in the receiver so that the pins that extend out from the ball mount shaft through the holes in the receiver don't extend out far enough, for my liking. This is because since the ball mount shaft has so much play, it will shift to one side. Then, the pin on the other side does not extend all the way out of the hole so that it is not flush. True, i am being paranoid. However, i imagine a case like a crash where enough force could pull the shaft out from the not fully extended pin side to release the trailer to wreak more damage. I would just feel more secure if the pins went out further through the receiver or the shaft was not so loose. Otherwise, i really like the product a lot... enough to give it four stars... :o)
# 3
Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Zinc Balls - 5-1/2" Drop
The hitch was received quite quickly and is even nicer than the picture shows it to be. I pull different trailers and it was always a hassle to have the correct hitch. I also like that they did a follow up call when I requested the item be shipped to an address other than my billing address. We are all concerned about credit card fraud. I will definitely order from them again!
I pay to receive the product in good condition, my hitch ended up being damaged, I don't know what type of packaging this was, they are supposedly a waoooo site, I ask for my return label and my refund, I
# 4
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
This is one solid hitch. Bought the hitch to pull about 5000 lbs. there's no doubt in my mind that it can handle it.
Ordering was extremely easy and etrailer representative very helpful. Chedi also sent me videos that explained perfectly how to install. I don't usually leave reviews, but these guys deserve a good one. Customer service and products delivered were impressive.
# 5
Channel Style Adjustable Ballmount - 2" & 2-5/16" Balls - 14,000 lbs
Still haven't towed anything with it yet but it seems very solid. I do think it will rattle some in the receiver because it is loose in my 2" receiver on my 2019 F150.
# 6
Rapid Hitch Adjustable Aluminum Ball Mount Kit - 2 Zinc Balls - 5-1/2" Drop, 6-1/2" Rise
The hitch was received quite quickly and is even nicer than the picture shows it to be. I pull different trailers and it was always a hassle to have the correct hitch. I also like that they did a follow up call when I requested the item be shipped to an address other than my billing address. We are all concerned about credit card fraud. I will definitely order from them again!
Sooooo....you sent me a product that was somehow put together backwards and I cannot take them apart somehow the ballhitch is stuck on the male portion backwards and defies gravity and doesn’t need a pin to stay on(becaue thier is no where to put the pin in cause it’s backwards
# 7
Curt Heavy Duty Forged Ball Mount for 2" Hitches - 5" Rise - 6" Drop - 17,000 lbs
This is one solid hitch. Bought the hitch to pull about 5000 lbs. there's no doubt in my mind that it can handle it.
Ordering was extremely easy and etrailer representative very helpful. Chedi also sent me videos that explained perfectly how to install. I don't usually leave reviews, but these guys deserve a good one. Customer service and products delivered were impressive.
# 8
Draw-Tite Ball Mount for 2" Hitch - 5" Rise, 6" Drop - 9-1/2" Long - 12,000 lbs
I bought a new truck with twice the towing capacity of my SUV. I needed a 6" drop instead of my original 3" drop, so I bought one with a 12,000 capacity. Very nice.
I got this to Flat Tow my Jeep in the near future. I needed the 5" rise and now the tow bar is almost parallel to the ground. Although the etrailer.com site said this was an economy unit, I am very impressed with the look and feel of the unit. It handles up to 12,000lbs! Nothing economy about it except the very fair price!!! The pictures and video, along with the measurements helped ensure the fit would be perfect and it is! I got a 1" rise ball good for 6000lbs to make the tow bar perfectly parallel. Thanks etrailer I will always shop etrailer first when looking for this type of equipment.
# 9
Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Greaseless Balls - 5-1/2" Drop
The hitch was received quite quickly and is even nicer than the picture shows it to be. I pull different trailers and it was always a hassle to have the correct hitch. I also like that they did a follow up call when I requested the item be shipped to an address other than my billing address. We are all concerned about credit card fraud. I will definitely order from them again!
I ordered my AM3405 and was amazed how quickly the etrailer team responded with not only my order confirmation but the fantastic follow up when it was shipped and delivered. I highly recommend etrailer and will order from them again. The product showed up in great shape and I am very happy with the quality. One recommendation would be to order two of the locking pins. One for the receiver and one to lock the ball mount to the unit. You will see by my picture I resolved that issue with a pad lock but the locking pin would have been better.
What our customers are saying:
"Your internet site is very well organized and easy to use...My order was shipped very promptly and included everything I ordered...All in all this was a simple procedure for what can be a complicated order. I would use your company again or recommend you to others. Your selection was broad and your prices fair."