Vehicle Style: without factory Tow Package Change
FiltersTrailer Brake Controller Specs:
Features:
This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. Its unique off-roading mode helps you handle rough conditions, so get out there and get towing.
Installation Notes:
Your vehicle should already have a factory connector at the rear. In this instance we recommend using wiring C56245 or 118271 which contain fuses and relays to activate the tow package.
In addition to the wiring, you may also need a bracket to mount the 7-Way, which is sold separately.
You may also need a 4-Flat connector to complete your wiring.
More Information >Trailer Brake Controller Specs:
Features:
This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. It's so easy to adjust your settings or activate manual override.
Installation Notes:
Your vehicle should already have a factory connector at the rear. In this instance we recommend using wiring C56245 or 118271 which contain fuses and relays to activate the tow package.
In addition to the wiring, you may also need a bracket to mount the 7-Way, which is sold separately.
You may also need a 4-Flat connector to complete your wiring.
More Information >Trailer Brake Controller Specs:
Features:
Get a brake controller in your truck that looks like it's supposed to be there. This sleek knob blends right into your dash and makes your settings simple and convenient to adjust.
Installation Notes:
Your vehicle should already have a factory connector at the rear. In this instance we recommend using wiring C56245 or 118271 which contain fuses and relays to activate the tow package.
In addition to the wiring, you may also need a bracket to mount the 7-Way, which is sold separately.
You may also need a 4-Flat connector to complete your wiring.
More Information >Trailer Brake Controller Specs:
Features:
You can stick the control knob to the dashboard, plug in the module, and your brake controller installation is done with no drilling and no hardwiring. The knob is large and easy to use, while the main unit is out of sight behind the dash.
Installation Notes:
Your vehicle should already have a factory connector at the rear. In this instance we recommend using wiring C56245 or 118271 which contain fuses and relays to activate the tow package.
In addition to the wiring, you may also need a bracket to mount the 7-Way, which is sold separately.
You may also need a 4-Flat connector to complete your wiring.
More Information >
