The Invisi Brake # RM-8700 and the Blue Ox Patriot II part # BRK2019 are both supplemental brake systems but they are pretty far apart in every other way. The # BRK2016 is a much simpler to install setup that works very well. But you have to install and remove it every time you want to flat tow/drive. For this style though it is the best setup.
The Invisibrake requires a one-time in-depth install that will take some time, but once installed it works great. If this is more like what you'd... view full answer...
I was able to find that your 2005 Haulmark TS6X14DS2 trailer has a 3500 lb axle. What I was not able to find was if you have a torsion axle or leaf spring suspension. If you have leaf springs, I recommend the Dexter axle # 35545E-ST-89 which has spring locations that are 74 inches center to center and hub face to hub face measurement of 89 inches.
If you have a torsion axle, then I recommend replacing your axle with the Timbren Axle-Less Suspension System that uses rubber springs for... view full answer...
Unfortunately, I don't recognize the part you have attached. Can you please identify what system you have for me that way I can make sure you get the correct replacement? If you don't know which system you have send me a photo of the entire mounting foot and I will do my best to identify it for you. view full answer...
Thanks for reaching out and providing a photo of what you have on your 2019 Jeep Cherokee Trailhawk!
From the looks of things you definitely have the Blue Ox Base Plate Kit # BX1143 so to replace the tabs you're going to need the Replacement Attachment Tab Assembly for Blue Ox Baseplates # BLU37XR which comes as a set.
For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low... view full answer...
It looks like the hardware for the trailer hitch will be the same no matter what actual hitch you have so in order to obtain a replacement hardware kit to install a trailer hitch on your 2000 Jeep Cherokee you can use the Replacement Hardware Kit for Trailer Hitches part # RHK. Once you get to the product page you can enter "13084" into the hitch item number box and select "Curt" form the manufacturer drop drown menu. This will give you the correct hardware whether you have a Curt hitch,... view full answer...
Thank you for the pictures! It looks like you have the discontinued Xpedition cargo basket.
I spoke with my contact at Thule who said that they only carried this basket from 2005 - 2008 and the kit came in parts bags so even though the Replacement M6 Wing Knob # 1500052527 and the Replacement Locking Cover # 1500052557 for the Trail XT looks like it will fit, they have no way to confirm this.
If the screws you are using are M6 screws then the knob should fit no problem. I went out to... view full answer...
LED tail lights oftentimes don't have replaceable bulbs in them and will instead have diodes. The closest light we have to compare to a Kenway 46282 is the Combination LED Trailer Tail Light - Submersible - 6 Function - 11 Diodes # STL8RB (passenger side) or # STL9RB (driver side), which uses non-replaceable light diodes instead of bulbs. They last much longer than bulbs, but would need to be completely replaced when they go out.
It looks like the Kenway uses light diodes so if the lights... view full answer...
To get a replacement hardware kit for Curt hitch # 13084 for your 1997 Jeep Cherokee you will need # RHK. The RHK product page you will need to enter the hitch number, 13084 where indicated and then select the manufacturer from the drop[ down menu. Then just click the add to cart button and our crack team of hardware specialists will assemble the proper kit. I have included links to the instructions and to a video showing a typical installation of this hitch for you. view full answer...
As long as the locks are not currently in the locked position you can use Control key # Y8007835 to remove the cores. The lock number will be printed on the side of the cores.
If they are locked then you will need to see if a locksmith can first pick the locks to allow you to use the Control key. If that is not possible the locks will need to be drilled out which could result in damage to the housing. view full answer...
We do have a hub that uses part # L44610 for both the inner and outer race.
The hub we offer is designed for 2,000 and 2,200 lb axles and will work with wheels that range from 8 to 12 inch diameter. This part number is # 8-259-50. The bolt pattern for this hub is 5 on 4-1/2.
The bearings you can use for this hub are either part # L44643 or part # L44649. You will need to use a precision instrument like a digital caliper to measure the spindle where the bearings are used. If the diameter... view full answer...
The Replacement Gear Motor Assembly for Lippert Component Power Gear Slide Outs, part # LC383755, uses 3/4 inch long 5/16 inch bolts. view full answer...
I do have the parts you will need to build an additional upright but we do not sell them together. In order to build an additional upright you will need 4 nylon inserts, 2 locking knobs, 2 mounting feet, 2 upright posts, 2 tie down cleats, 1 crossbar, 2 end caps, 2 corner braces, 2 saddles, and 1 hardware kit. I have listed the part numbers for the following items for you below.
Nylon Inserts - part # TAFX-42008 (4)
Locking Knobs - part # TAKB-90030-1 (2)
Right Mounting Foot - part #... view full answer...
If all you need is the installation kit, we have just what you are looking for. You need part # RHK.
When on the product page for # RHK just enter the hitch number in the appropriate box and then select the hitch manufacturer from the drop down menu. Enter the quantity and you are good to go. view full answer...
Yes the 12 volt fuse board is included with the Lithium Converter for WFCO RV Power Centers part # PD4655LIV. We do recommend you use the new board it is designed to work with the new converter. view full answer...
The correct replacement pressure switch for the Roadmaster BrakeMaster Braking System part # RM-9060 is the Replacement Pressure Switch for Roadmaster BrakeMaster part # RM-450070-10. view full answer...
We do indeed have replacement parts available for your etrailer Round Swivel Marine Jack # MJ-1206B. These include the Sidewind Handle Knob # MJ-1000B-KB, Caster Wheel # JWK-6P, Gear Kit # MJ-1000B-GR, and Bearing # MJ-1000B-BR.
I have attached a great video that demonstrates how to rebuild this type of jack, during which you can see how everything comes apart and how internal components are replaced. view full answer...
I have attached a link to our selection of suspension bolts that you can filter through. You will just need to make sure that the bolt you use as a replacement has the correct specs.
Among the linked bolts is the Redline Wet Equalizer Bolt for Double Eye Springs # 126B2 which has a 9/16" diameter and 2-5/16" of usable length. It also comes with the grease zerk fitting that you mentioned. view full answer...
The Mopar flat-tow wiring kit 68321424AB which was installed on your 2015 Jeep Cherokee requires a 10-amp fuse. You will be able to source this from your local hardware store.
The Demco SBS Reinstall Kit # SM99226 will contain all the parts needed to install the Demco Air Force One # SM99243 from your 2010 Ford Escape onto your 2015 Jeep Cherokee. view full answer...
Go To Results