The dimensions for the RC Manufacturing Trailer Tongue Box are; width at back is 36 inches, width at front is 21-1/2 inches, the height of the box is 20 inches and the depth of the box is 16 inches.
You can see these dimensions in the photo I have edited for you. view full answer...
When measuring for the correct cover for your Continental Tailwind 6 x 12 cargo trailer you will want to leave out the trailer tongue. If your Tailwind has a box that measures 12' in length then part # 290-46002 will fit great, however if you're wanting one that will also include the tongue then you'll need to add that length to the 12' box and choose a cover accordingly.
To cover your tongue you'll need to use either the 14' # 290-46003 or the 16' # 290-46004 depending on your tongue length. view full answer...
The tongue weight capacity of the Titan Hitch Box Extension for 2-1/2" Trailer Hitches # RP45018 at the full 48" extension would actually be 400 lbs.
It would be 500 lbs if you cut the extension down to 41". view full answer...
The best weight distribution system with sway control for a trailer with tongue weight that is between 1,200 and 1,300 lbs is easily the Strait Line kit part # RP66130 as it has a tongue weight range of 800-1,500 lbs and features the best proactive style of sway control that works to fight and prevent sway before it starts. The spring bars are also made of the highest quality spring steel too.
For a shank with enough capacity for this system that also fits a 2 inch hitch you'd want the... view full answer...
The first step in choosing the correct weight distribution system is to determine the actual as-towed tongue weight of your trailer. Anything stowed in the bed of the truck behind the rear axle should be included as tongue weight. For best performance, the tongue weight of the trailer should fall as close as possible to the middle of the effective range of the system you choose.
I have included a FAQ article on determining tongue weight you might want to check out.
The Pro Series Weight... view full answer...
The RC Manufacturing T-Series Trailer Tongue Toolbox # 350980 is constructed of 14 gauge steel.
I attached a review video link for this box for you to check out as well. view full answer...
The Reese Goose Box RP94716 and Reese Goose Box # RP85FR are the same physical dimensions. You will not gain any more distance with one over the other. It is important to choose the correct weight rating for your trailer.
The Reese Goose Box # RP85FR is rated for a maximum trailer weight of 20,000lbs and maximum tongue weight of 4,000lbs view full answer...
One latch. The Replacement Handle Latch and Key for RC Manufacturing A-Frame Trailer Tongue Tool Boxes item # 3W-461-545-SSL-EP is sold individually. view full answer...
The longest a-frame tool box we offer for your trailer would be the UWS A-Frame Trailer Toolbox # UWS01065 which has a side that measure 49 inches. The dimensions are 24" long (Front) 49" long (Rear) x 18" wide x 21" high. view full answer...
The DeeZee Specialty Series Trailer Tongue Toolbox # DZ91716 that you referenced weighs 26 lbs. The overall dimensions are 34" long (back) x 16" long (front) x 14-1/4" wide x 18" tall. view full answer...
We have the A-frame tool box part # UWS01039 which would be tall enough for a propane tank that is 19 inches tall but the # 313-TM362016M would be just a little bit too short for that.
I attached a review video for more info on this for you to check out as well. view full answer...
The Jack Handle # ORJW750SH on the Removable Xtreme Off-Road Swing-Up Trailer Jack # ARK57FR is 6-1/2" long from the center of the handle to the center of the magnetic mount for connecting to the jack. view full answer...
In the 24 inch configuration of the Reese hitch extender part # RP45292 that you referenced the capacities are:
600 lb tongue weight and 6,000 lb trailer weight. view full answer...
The Brophy ball mount # BH20 is not too much longer than standard length ball mounts so the extra stress it would put on the trailer hitch would be minimal if at all. As long as the trailer hitch on your 2006 Dodge Ram has a tongue weight capacity to handle the trailer tongue weight and the 7500 pound gross trailer weight you will be good to go. view full answer...
Tongue weight capacity would be 10 percent of the gross trailer weight capacity for Titan extension # RP45018. So that would be 500 pounds at 41 inches or 400 pounds at 48 inches. Or when used with weight distribution it would be 750/600 pounds.
Yes, they do factor in temporary shock for bumps, dips, and what have you when providing the ratings, just like with hitches. In other words the unit is not going to break from a spike in the tongue weight due to a bump or something else. If the... view full answer...
If you are wanting to add a hitch extender to your 2019 Ram ProMaster 1500, you will decrease the hitch tongue weight and tow weight capacities by 50%. With that being said, if you use a hitch extender like the Hitch Extender For 2" Trailer Hitch Receiver 7" # HE06 (the shortest one we offer for 2-inch hitches), your weight will decrease to 150 pounds.
Depending on what cargo box you are wanting to transport on your vehicle as well as the weight of the cargo itself, you may have to buy... view full answer...
Go To Results