Will Using a Longer Ball Mount Put Too Much Stress on the Trailer Hitch on a 2006 Dodge Ram  

Technically any additional length is going to increase leverage on the trailer hitch. But there isn't an exact standard length ball mount so going super technical on how much the force multiplied when the ball mount is beyond a certain length is…

The Brophy Lunette Ring w/ 5-Position Adjustable Channel Bracket #BR63ZR is most definitely a weld-on installation and you'll use those holes as a reference point during the installation. A lot of times seemingly random holes like these are what…

My contact at Titan confirmed that you CAN change out just the inner portion of your Titan actuator ball coupler #T4747220 to convert it to a lunette ring type like #T4748000. The conversion kit you need is part #T4045600183, their Replacement Inner…

The Replacement Inner Slide for Demco DA91 Actuators #DM12808-97 you have pictured is only designed to work with the Demco Hydraulic Trailer Brake Actuator #8759121 or DA91 if you go by Demco's part numbers. It has a 3" x 3" outer…

We most likely will have a solution for you, but hitch extenders end up cutting the capacity of a hitch by 50 percent. Your best solution would be to go with a longer ball mount to help give you that distance. For example, the Brophy ball mount part…

I wish you would have asked this question prior to your purchase of the Curt Extender #C45791, because this extender will not work for your application. It is rated for the 3,500 lb total trailer weight towing capacity and because it is an adapter…

The Brophy Ball Mount #BM20 and the Brophy #BH20 referenced in your question are extremely similar to each other. They are both designed for 2 inch trailer hitch receivers, have a 10,000 pound towing weight capacity, feature a long, 13-1/4 inch shank…

Thank you for your purchase of the BullRing Stake Pocket D-Rings #BU38FR for your 2015 Ford F-350! I reached out to my contact at BullRing who said that fitment looks just fine so that extra space around it isn't anything to worry about. The main…

Your Dometic 57915.531 is a 13.5k BTU AC unit which the Advent Air RV AC Unit #ACDOM135 is the same size and is also designed to replace Dometic units.

The only TorkLift trailer hitch that fits your 2005 GMC Sierra 2500 short bed is #TLC1204. This is the SuperHitch Original Class V hitch with dual 2 inch receivers. It is rated for 1,700 pounds tongue weight and 17,000 pounds gross trailer weight.…

If you have a 2-1/2 inch size trailer hitch (opening of the hitch measured) then you could use a longer extension like the #C45048 which can be between 24 and 34 inches long. Most extenders don't have a whole lot of weight capacity but this one…

When it comes to add a hitch extender on your 2006 Chevrolet Silverado 2500 HD with a 6-1/2 foot bed first you will need to install The TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2 inch Receivers #TLC1204. This…