Nope, you can use the Roadmaster InvisiBrake Supplemental Braking System, # RM-8700 with a 2021 Ford Escape Hybrid Titanium. I contacted the Tech Rep at Roadmaster to verify this for you. The Roadmaster Even Brake Portable Supplemental Braking System, # RM-9400 is currently their only supplemental braking system that can not be used on a hybrid vehicle or a car with active power-assist brakes.
Please note the attached product review and installation videos. view full answer...
We have numerous tire chain options for your 2008 Ford Escape with 235/70-16 tires. I have included a link to all of the tire chains that will fit your tire size for you to review. A Class S tire chain will need to have 37mm or less clearance above the chain and 15mm or less clearance out from the sidewall.
The Glacier Cable Snow Tire Chains, # PW2029C, that you have referenced will fit and are considered Class S chains as they require 15mm or more clearance. I also recommend adding rubber... view full answer...
We do offer trailer-mounted cargo control items such as tool boxes and racks for propane tanks, shown on the linked page, and we also have a tray from Stromberg Carlson, their Trailer Tray Cargo Carrier # CC-255, that mounts to an a-frame trailer tongue. This cargo tray measures 20 x 32-inches and offers a weight capacity of 300-lbs. A nice benefit of this elevated design is that you can install this tray along with other trailer-mounted cargo items, depending on their size. We also offer... view full answer...
That's hard to say but I would not anticipate the Trailer Valet 5X part # STC-V211 working well at all if there's snow on the driveway. If there's any type of incline it would be pretty dangerous as it could start sliding and potentially not be able to stop. I would advise against it but you'd have to use your best judgment. view full answer...
There are adapters available to increase a 1-1/4" to 2" hitch, the Curt Adapter - 1-1/4" to 2" - 6", # C45785. This adapter turns your 1-1/4" trailer hitch receiver into a 2" receiver so that you can mount a bike rack, cargo carrier or other 2" hitch accessory. Using this adapter will however reduce your hitch's weight capacity by 50 percent.
Please verify the specs for your current hitch. If for example you have the Draw-Tite Trailer Hitch Receiver (our lowest weight rated for example)... view full answer...
Draw-Tite offers a very similar hitch with a 1-1/4 inch receiver, part # 36524.
If you would prefer a Class II hitch that would be less visible at the rear of the vehicle, you might be interested in the # 36529 or the # 90230 that includes a drawbar.
If you will be towing, you will also need the trailer wiring harness, part # 118566 and the appropriately-sized trailer ball, # 19256 for a 1-/78 inch ball or # 19258 for a 2 inch ball.
I have linked you to some installation videos you... view full answer...
I'm not sure of the exact reason why some of these don't have gaskets and I'm not aware of any reason why they don't include them; none of the caps we carry come with an actual gasket but there are some options that provide a better seal than others. I recommend checking out the Replacement RV Gravity Fill Spout with Plastic Cap - Black # 372222-224BK-A, which doesn't have a gasket but does create a seal on your spout using screw in fittings that will keep debris and outside water from... view full answer...
You should change your breaker to a 30 amp breaker when installing the Curt Echo Mobile # C51180. 40 amps is good for protecting more than two axles but if you have a tandem axle trailer you'd want the breaker to trip at draws above 30 amps so that it protects the wiring/circuits. view full answer...
I may have a solution for you, but there are not any custom fit hitches designed to fit on the 2014 Ford Escape. However, depending on the front frame access on your vehicle, you may be able to mount a universal hitch like the Ultra-Fab 2" Trailer Hitch Receiver # UF35-946403, which would fit on I-beam, C-channel or rectangular trailer frames between 47-1/8" and 77" wide. This hitch would need to be welded on to the frame, but it would be the only available option for your 2014 Ford Escape.
I've... view full answer...
The best trailer wiring kit we offer for your 2007 Ford Escape that does not have the factory towing package is the Tekonsha part # 118426 as it has the most reliable converter box and the easiest install. The other options are a bit more prone to shorting out in the event there is a trailer wiring short. view full answer...
If you dont mind drilling a few holes you could get the LED Mini Trailer License Plate Light # LPL31CB to work with a Steel Trailer License Plate Mount Bracket # LP20SB. But I pulled both these products from our warehouse and the holes of these products do not line up, but if you used the # LPL31CB as a template you could drill the correct dimension holes in the # LP20SB above its current holes.
Or you could check out the Optronics Heavy Duty License Plate Bracket # LP15SB. This has a... view full answer...
For trailer wiring for your 2006 Ford Escape you would want the Tekonsha kit part # 118426 which is a confirmed fit.
I attached an install video for this on a similar 2006 Escape as yours too. view full answer...
If you wanted a custom fit cargo liner for your 2011 Ford Escape you would want a WeatherTech Cargo Liner for the Ford Escape, part # WT42197.
I spoke with my contact at Highland and she informed me that they do not have measurements for any of their Custom Fit Cargo Liners. The reason for this is because they are all custom molded to fit the cargo areas of specific vehicles, and the shape of the cargo areas are sometimes round or oblong and it would be difficult to give specific measurements... view full answer...
I did some research and it looks like the correct cover only for the Roadmaster Sterling tow bar is # RM-055-3. This is the only cover Roadmaster lists for the Sterling All Terrain tow bars. view full answer...
I recommend using a universal fit towing mirror. A custom fit mirror is not yet available for your 2010 Ford Escape. Instead, I would use the Universal Clip-On Towing Mirror (Each), # KS3891. This mirror straps to your existing mirror housing and will not interfere with the visibility of the factory mirror. I have included a link to a video review of this mirror below.
You might also be interested in the CIPA Deluxe Door Mount Mirror, # 11650. This is also a universal fit item that mounts... view full answer...
If you need just an extra 4-wire pigtail harness for your Prodigy P2 Brake Controller # 90885 to enable it to be swapped back and forth between the two vehicles, you can use part # 20127. This type of pigtail harness allows hardwired installation in just about any vehicle.
You'll also was either a new mounting bracket # P7685 or a pocket mount # 7686.
Some trucks and other vehicles have a quick-connect port under the dash (or behind a kick panel) to allow the P2 to just plug in without... view full answer...
The bike rack you referenced, the Hollywood Racks Sport Rider Trike Carrier # HR1000Z-R-TRKADP, is indeed suitable for transporting an adult trike of up to 100-lbs weight and with a wheelbase length up to 74-inches and track width up to 36-inches. This rack can be used with either a 1-1/4-inch Class II hitch or with a 2-inch hitch (it cannot be used with a Class I hitch).
Recommend the optional lock set # HRLHPTC.
You will want to check the hitch on your vehicle to ensure it is rated... view full answer...
We can get your 2010 Escape all set for flat towing. The essential items needed for flat towing include a tow bar, safety cables, a wiring/lighting solution, base plates and a supplementary braking system. A high/low adapter is also often required to keep the tow bar level when hitched to your motorhome.
First, for base plates I suggest the Blue Ox # BX2605 that you referenced. You can use the Alpha tow bar # BX7380 and this is a great choice since it includes the safety cables. For a... view full answer...
For some vehicles we offer custom-fit towing mirrors like the CIPA # CM11800 that fit the Ford F-150, but for your 2003 Escape since no custom mirrors are offered you can use a cost-effective clip-on universal towing mirror. K-Source offers their # KS3891 which is an extra-large adjustable clip-on mirror. CIPA also offers a high-value mirror # 7070. Both of these work on driver's and passenger's mirrors and are sold individually. A video for each mirror is linked to help illustrate their... view full answer...
We carry a variety of trunk bike racks that fit both the 2013 and 2014 Ford Escape Titanium models. However, the largest carrying capacity is 3 bikes.
One of our most popular 3 bike racks is the Yakima Fullback Bike Rack, # Y02633. The FullBack
is a light weight rack that will mount to the rear of both the 2013 and 2014 Escapes. The rack uses 4 cam-buckle style straps and a padded upper cross bar for protection against the Escapes rear window. The only issue with using this or most trunk... view full answer...
Go To Results