Hello Tom, thanks for reaching out. If your tow dolly already has brake lights that are DOT compliant, you actually would not need to add additional lights.
If you still want to add a separate set of tow lights, the best way to do this is using the 7-way plug on your RV. Since the 4-flat is already taken, you can use an adapter for your 7-way like part # 37385 to hook up the additional 4-flat. view full answer...
Hey Eric, on the Draw Tite hitch part # DT73RR the distance from the hitch pin hole to the back of the hitch (towards front of vehicle) measures 5 inches. From the pin hole center to the end of the opening on front of hitch measures 2-1/2 inches. view full answer...
Hi Emily!
For your 2024 Hyundai Tucson with the flush side rails you will indeed need the Custom SightClips and Pads. They are what actually secures the towers to your side rails. The full kit for your Tucson is the Yakima SightLine FX Roof Rack for Flush Rails # Y53YD. This includes everything you need to get the roof rack installed and ready for use.
Speaking of which, what are you planning on using this for? view full answer...
Hey William, thanks for reaching out!
Are you needing this for your 2022 Hyundai Tucson you've previously asked about? If that's the case, the RidgeLine Towers mounted to your flush rails via the RidgeClip 25 kit 8006025 which has been discontinued. At this point you can try to find a rogue 25 kit being sold online, but you'll likely need to update to the SightLine parts that replaced the RidgeLine product line:
SightLine Towers - # Y64AR
SightClip Fit Kit - # Y27AR
Let me know if you're... view full answer...
Hey Allan, all of the hanging bike racks out there are limited to only carrying up to a 35 lb bike so you'd need to go with a platform e-bike rack to be able to carry your 52 lb bike like the Hollywood Racks Sport Rider part # HLY74FR. view full answer...
Hey Ronald, so I found the section in your owners manual for your 2022 Hyundai Tucson on dolly towing and you can dolly tow the FWD vehicles with a dolly like the part # RM-2050-1 that you referenced. view full answer...
Hey Kathleen, no you can't use the Hullavator part # TH898 on a flush bar style roof rack. The crossbars need to go through the feet of the rack and extend past them. view full answer...
Go To Results