Hey, Jerry.
Since your Hummer is a 2007, I’m going to assume it has a key-start ignition. For that setup, the red wire on the Roadmaster Brake-Lite Relay Kit, part # RM-88400, will connect to the fuse tap. I’ve included the steps for that portion of the install below, along with the diagram for reference.
- Insert the fuse you just removed into the slot closest to the fuse blades (Figure 2).
- Then insert the fuse tap into the empty slot in the fuse panel (Figure 1).
- Using the attached... view full answer...
Hello Jesse,
For your 2005 Hummer H2 with tire size 37x12.5x17 for on road use you want the Titan Chain Snow Tire Chains w/ Cams for Wide Base Tires - Ladder Pattern - V-Bar Link - 1 Pair # TC3835CAM, I would also get some # TCMA3 for a nice snug fit. Now since you have a different tire size on the Hummer than what comes stock, you will want to double check for clearance. I have included a diagram to show where you want to check for this clearance, these chains are 5.5 MM.
Once last... view full answer...
Hey Leo, thanks for reaching out. I can definitely point you in the right direction, but there isn't a way to look up your camper to know exactly which valve you'll need.
A 3" waste valve is standard for black tank applications, so what you'll likely need is something like the Valterra Waste Valve for RV Black Water Tank # T50A. This is a standard 3" valve with a T-handle, and it has lug fittings on the end for connecting bayonet fittings on a sewer hose. The lugs are also used to attach... view full answer...
Hey Eduardo, thanks for reaching out!
We have exactly what you need with the Yakima SkyLine Roof Rack for Fixed Mounting Points # Y67KB. This installs to the tracks on top of your Hummer and has a high enough weight rating to handle the Roof Nest 10 just fine. I'm not sure what mounting kit you have for your roof tent, but the crossbars on this kit only measure 2-3/4" wide x 1-1/8" tall which is pretty standard and shouldn't be giving you any mounting issues.
What kind of camping trips... view full answer...
Hey Denny, we have the Roadmaster Direct Connect Base Plate kit part # 2507-3 which is a fit for your 2008 Hummer H3. Since what you have is a Blue Ox tow bar you would also need the adapter part # BX88185 to connect to the Roadmaster kit I mentioned. view full answer...
Hey Israel, yes the Timbren Rear Suspension Enhancement System # TGMRH2 will fit your 2003 Hummer H2 with air suspension. These springs have an 8,600 lb capacity, will replace your axle bump stop on your frame, and has a no drill install.
If there is anything else I can help you with, please feel free to drop a comment and let me know! view full answer...
Hey Jeff, yes the Blue Ox base plate kit part # BX4104 is the correct fit for your 2008 Hummer H3.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.... view full answer...
Hey Derek! Since all of the AC units moved to R32 refrigerant last year you will need a complete replacement system. I recommend the new Advent Air system. For a ducted setup you can choose from the following based on color and capacity:
-Advent Air RV Air Conditioner System - 13,500 Btu - Single Zone - Ducted - White - R32 # ADV87QR
-Advent Air RV Air Conditioner System - 13,500 Btu - Single Zone - Ducted - Black - R32 # ADV59QR
-Advent Air RV Air Conditioner System - 15,500 Btu - Single... view full answer...
Hey Reese, if you indeed have 24v throughout the vehicle, you'll need to get a 24v to 12v step down reducer / converter to do this. Sorry to say that we don't carry any, but they are relatively cheap on other sites. They are simple to install. Then you can install universal 4 way like # C58044.
One thing I'd check is that you actually have 24v going to the tail light circuits (use a voltmeter). I'd imagine that you have 12v already at the tail lights, which means you could just install... view full answer...
It's totally normal to splice on some extra wire to the 12 Volt Outlet Kit # RM-9332 to get it to the battery so I would just use some 12 AWG # 12-1-1 and a butt connector # DW05745-5 instead of using the extension # RM-9331. The extension would technically work but just splicing in more wire is a bit cleaner of a setup. view full answer...
Hey Julian, you'd be looking for something like the Pack'Em Ladder Rack # PK-28WL-BMH which goes on the side of the trailer, or the P&F Enclosed Trailer Ladder Rack for 6' to 8-1/2' Wide Trailers # PF79VR which goes on the roof.
On the first one I mentioned, the side mount kit, the mounting bolt dimensions are 5-1/16" long x 1/4" diameter so you'd want to make sure that fits your trailer wall. Otherwise you could use longer hardware if you find that you need to do so.
The second one I... view full answer...
Go To Results