Hey Mike! I checked with our contact at B&B Molding and found that the Replacement RV Plastic Check Valve with Clip for B&B Molders City Water Inlet # BM46MR is the correct replacement for your B&B Nautilus # BM43GR. This is the same as the OEM part number 301-036-00017. You can find the instructions under the B&B repair file listed below.
https://www.bandbmolders.com/wp-content/uploads/2018/01/Nautilus-P1-Repair.pdf view full answer...
The spring pins on the Lippert Solid Stance RV Step Support Kit # LC96BJ are supposed to face the other direction on the step. This ensures they will fold in past the other steps and also helps prevent your toe from getting caught up on the pin as you go to step up. The spring pin looks like it will easily clear the handle under your step since it sits further down near the ends.
You're 3rd pic did not load on my end. And I linked the installation instructions near the bottom of the page... view full answer...
Hey Dale, we really have to stick with recommending mounting the Progressive Dynamics Transfer Switch part # PD64FR in the ways that you mentioned which are outlined in the instructions. They do recommend putting a shield over the fans if you want to have them mounted in the vertical orientation so that would be a smart call that avoids the issue of debris falling in the fans. view full answer...
Hey Dale, the instruction manual is correct as they are linked directly to the manufacturers site so in the event something changes (like it did here) the correct info is always accessible in the instructions link. So the correct breaker is 250 amp and I will send an update to have the description fixed. view full answer...
Go To Results