Hey Adam, so I sent your pin box info to Lippert so that I could verify what you have and found that you have the 1116 style pin box and that means the correct Gen-Y fifth wheel to gooseneck adapter is the part # GY48FR that you referenced. I also verified this is correct weight rated option for your 2023 Keystone Sprinter 32bh.
Is your truck a short bed or a long bed? Looks like your Keystone is setup to provide short bed clearance but wanted to make sure it wasn't a super short bed like... view full answer...
Hello Scott. Our best option for replacing the Duo-Therm is an Advent AC unit. The Advent AC units are made to be directly compatible with Dometic AC systems. Meaning the AC unit will plug in, and all of your ceiling registers and thermostat will stay in place and work exactly the same (only with colder air). We have Advent units available in both 13,500 BTU and 15,000 BTU depending on your needs. Here is what I recommend:
13,500 BTU - Advent Air Low Profile RV Air Conditioner - 13,500... view full answer...
The 676004 number you provided as a replacement fuse for the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System # LC358590 returns to a 30A fuse instead of a 35A fuse. That being said, we do not carry that fuse. You can however take your current fuse into an auto parts store to source a new fuse or we have fuse kits available like the Auto Fuse Kit with Tester # PT36ZR that includes 30A fuses. view full answer...
From what I can find of the Sunlink Lighting Star Series RSBF-4N-008 it is a 10"x 4" dome light with a button. Our closest option to this is the Gustafson RV LED Dome Light w/ Button # 277-000492. This light is slightly smaller at 9" x 4" so it's not an exact replacement but is is very similar in design. This 12v light has a simple two wire installation that can easily replace your old Sunlink light. view full answer...
While your pictures do indicate that you have an AL KO 4,400 lb axle the actual brake assemblies you have is a Dexter 3,500 lb assembly part # 23-26 or for the pair # 23-26-27.
When it comes to replacing your hubs, based off some previous answers it looks like the Trailer Hub and Drum Assembly - 5,200-lb Axles - 6 on 5-1/2 Item # 8-201-5UC3 could be the right replacement for you, but you will want to confirm which bearings are in your existing hubs. This is the most reliable way to determine... view full answer...
The bearing kit part # BK2-100 matches one of your bearings and your grease seal but it does not match everything so it would not be the correct kit to use. Since we don't have a kit that has everything your best option would be to get the parts individually. So for bearings you'd need the # LM67048, the seal # 58846, and bearing # L68149. view full answer...
Your best option to lift your 2015 Keystone sprinter 5th wheel camper is the Correct Track Trailer Alignment and Lift Kit - Tandem Axle # RR23QX. This adjusts in increments of 1/4", and can give you up to 2-1/4" of lift. It also helps to keep your axles aligned and parallel to each other.
The way it works is it bolts under your suspension hangers and adds length to them.
If you want blocks rather than hanger extenders, you will need to check your axle tag to see what axle you have. If... view full answer...
The quick connect is designed to have propane come out and is fed from the main propane tanks on your 2014 Keystone Sprinter. Check for a small lever on the side of the connection that needs to be flipped down so it is in-line to allow the propane to flow.
If you already did this, it could be that you hooked up an appliance that has its own regulator. The propane is already flowing through the regulator on your 5th wheel, so if it is double regulated you won't have enough pressure to... view full answer...
It's not super common, but sometimes replacement LED trailer tail lights and turn signals will hyperflash, and this is especially true if they replaced incandescent lights. There is a fix for this though, which is a simple load resistor kit:
- Load Resistor Kit for LED Turn Signals # DI34ZR view full answer...
To determine the correct size SnapPads for your 2016 Keystone Sprinter 269RLS you'll need to measure the diameter of the jack feet and note the shape that they are as SnapPads are designed to fit a wide variety of shapes and sizes.
For example the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet # SP54FR4 you were looking at will fit a round jack foot with a 9" diameter.
I highly recommend measuring each jack foot as some manufacturers have been known to use... view full answer...
We do have the correct 29-1/2 inch replacement legs for Venture landing gear that is measured on the outer tube like you mentioned, which is the following:
- Replacement Lead Jack with Drop Leg # LG-179013
- Replacement Follow Jack with Drop Leg # LG-179014 view full answer...
I looked up pictures of your 2014 Copper Canyon 5th wheel 333 FWRLS and the RV ladder part # LA-401BA that you referenced would fit it pretty easily. view full answer...
Good question, I checked on this for you and found out.
**Go Power Solar Elite Charging System - 380 Watt Solar Panels - 2,000 Watt Inverter Charger # 34282184.
This unit does come with a set of instructions, you can also find the instructions linked on the webpage closer to the bottom.
I will link to an installation guide as well to give you some help. view full answer...
Go To Results