The auto leveling system on your 2017 Keystone Sprinter is a Lippert auto leveling system, so the stabilizers that I recommend are the JT's Strong Arm Jack Stabilizer Kit which are also by Lippert and confirmed to work.
If you have more than 58 inches between your front landing gear legs, then you will want part # LC191023. If you have less than 58 inches, then you will want part # LC191024.
You will also need the Adapter Lug, # LC314592, for the rear leveling legs. view full answer...
I do have some options for you but I think we need to double check your axle capacity. I looked up the 2008 Glendale Titanium Tour Series 5th Wheel Trailers and the heaviest one I could find (M-36E41TBR) was 12,562 lbs which would be very unlikely to have 8,000 lb axles. The majority of double eye leaf springs max out at 7,000 lbs as well.
Therefore, I recommend that you check the axle tube for the identification sticker. If you can send me a photo of this I would then be able to assist... view full answer...
The only replacement option we offer for the Electric RV Fireplace BLT-999A-2/N is the Greystone 26" Electric Fireplace part # 324-000068 which has crystals, not logs. In order to be sure it fits your cutout withou a gap you'll need to measure. The cutout must be at least 26-1/4" wide x 20-1/2" tall but no more than 28-3/8" wide x 21-3/8" tall. view full answer...
The closest RV step we offer to 27 inches in width is the Flexco triple step # SMFP-3200L that measures 27-1/8 inches in total width.
You might need the outriggers part # LC301704 to move the brackets out to install the steps if yours is 27 inches wide. view full answer...
For the Keystone Montanas Lippert does make specific landing gear legs for those trailers, but if all of the dimensions are compatible for the # LC333964 then there's no reason in your situation you couldn't use the set. Here are the full specs:
Total lift: 37"
Travel: 21"
Drop leg: 16"
Outer tube length: 29-1/2"
Distance between weld-stops: 17-1/2"
Cross shaft length: 41" - 71"
Handle dimensions: 29-11/16" long x 10-3/16" wide
Footplate dimensions: 5" long x 7-15/16" wide
Combined weight... view full answer...
Yes, you can up to three additional cameras to the Furrion RV Observation Camera System part # FOS05TASF. For the side of your trailer, I recommend using the Furrion Vision S Side Camera w/ Marker Light Bracket part # FCE48TASL which is also a built in marker light. If you wanted to add a camera to the vehicle as well then you can do so with the Furrion Vision S Rear Camera w/ Sharkfin Bracket part # FCN48TASF. view full answer...
Hydrastar has a slip-on style version of their 7k disc brake kit with the part # HSE7K-T1SO. You will also need idler hubs too like with the part # AKIHUB-865-7-1-EZ-K but you should note that we don't have any oil-bath idler hubs in this capacity. So you'd have to see about sourcing an oil-bath idler hub elsewhere or use a grease hub. view full answer...
If you have the Kodiak disc brake rotor/hub part # KHR1389D that you referenced the bearings you need are part # 25580 and # 02475 and then the grease seal is the part # RG06-070. If your trailer has 7k axles installed on it these part numbers would be what you'd need. view full answer...
The towing capacity of your 2009 Ford F-250 will remain unchanged through the life of the vehicle in the eyes of the manufacturer no matter what components are added. The suspension enhancements that you are referring to will certainly help with your vehicle's ability to support the added weight but again will not increase it.
Please note that when using a set of airbags on a truck that is also pulling a 5th wheel trailer you need to be aware of where the brackets mount for each. If you... view full answer...
I can help you find the right assemblies, but I do not know exactly which ones you have on your trailer. I looked up your Keystone Alpine 3640RL and it appears to be rated for around 15k and has a tandem axle setup so you'll most likely need higher rated assemblies.
To pick out the correct brake assemblies for your trailer you need to know a few things.
You will want to measure the inner diameter of your hub/drums and the depth of the drums to determine what brake assembly dimensions... view full answer...
It sounds like you are looking for the manual override nut part # LC55FR which is what the manual override crank of your stabilizer attaches to when manually raising or lowering. view full answer...
I recommend using the Advent Air Replacement RV Air Conditioner for Dometic Setup, # ACDOM150. This is a direct replacement for Dometic AC units and can be used with ducted or ductless systems. It is designed to plug directly into your current Dometic setup and works seamlessly with your existing, in-good-working-order Dometic air distribution box and thermostat. This eliminates the need of an adapter wiring kit, which saves you time and effort. view full answer...
The total weight of the Husky Silver Series 16K W 5th Wheel Trailer Hitch # HT31326-31314 that you referenced is 135 lb. This then has a 16,000 lb trailer weight capacity. view full answer...
We have the Curt adjustable trailer hitch part # C13704 which can fit frame widths between 22 and 72 inches as well as has a 350 lb tongue weight capacity. As long as your trailer has box frame, C-channel frame, or I-beam frame this will fit and work well. view full answer...
We carry the hub you are looking for with our part number 8-219-13UC3 and then for brake assemblies # 23-464 for the left hand side and # 23-465 for the right hand side. view full answer...
We have some sink covers that could work for you. Cover # CAM43437, # CAM43436, and # CAM43431 are 13 by 15 inches and have adjustable feet on the bottoms for the best fit. We do not have a cover with the exact dimensions of your sink though. view full answer...
We have just what you need. The SolidStep Manual Fold-Down Steps # LC678027 that you referenced are a 4 step version of the SolidStep designed to fit up to 30 inch wide doorways like you have. view full answer...
We have what you need to get a bike rack on the back of your 2019 Keystone Alpine, but there is no rack that is 5th wheel approved and is a 1-1/4". You can get another hitch or something like this # 3371804060 so you can use a 2" bike rack. These are the only size shanks that are approved to work with 5th wheels like yours.
Then you can get this RV Rider # HLY64FR bike rack. This is approved to work with your 5th wheel and has a capacity of 80 lbs per bike so it's fully capable of carrying... view full answer...
In order to choose the correct leaf spring hangers and shackle links for a 2016 Keystone Alpine 5th Wheel you'll need to measure the leaf spring width, note the type, measure the leaf springer hanger height, and shackle length. We do offer kits with all of these items as well as a few more like the Tandem-Axle Trailer Hanger Kit for Double Eye Springs part # APT5. This kit is designed for 1-3/4" wide leaf springs. It has 3-1/4" tall equalizers and 2-5/8" shackles.
I have attached a full... view full answer...
Go To Results