Atwood was sold to Dometic a few years back and replacement parts for older landing gear are scarce. We do still have Stromberg Carlson Landing Gear repair kit for the follow jack that will fit, part # LG-146060. For a lead jack repair kit use # LG-146059.
Since repair parts will eventually be unavailable for this landing gear I suggest you consider replacing the setup with a new one such as # RVLG-8HDL which is rated for 8K. A motor kit can be added using part # LC142178. view full answer...
To replace your VT00310R slide out motor you need the Lippert 18:1 Venture Actuator Slide-Out Motor # LC132682, which I confirmed is the correct replacement with my contact at Lippert. view full answer...
I have a solution for you, but the 8100TR model number was in a lot of the older Fan-tastic Create-A-Breeze vents, which have since been discontinued. You can use Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans part # FVK8017-00 you were looking at, which is designed to replace the bow tie bracket, fan blades and motor.
The motor alone is not available but this is a great upgrade to the old motors since many customers have said this replacement is less squeaky compared... view full answer...
From what I have found, the 2003 Jayco Designer 32 RLTS has a GVWR of 13,500 lbs. The tandem axles will have enough capacity to handle the GVWR but typically subtract the pin weight from the GVWR. I was unable to find the pin weight, but using 15-20% of your GVWR you probably have 5,200 lb or 6,000 lb axles with 6k being the more likely of the two.
I recommend checking out the axle tag on your existing axles to verify this information. The capacity is typically listed on the axle tag.... view full answer...
Go To Results