I do have an option for you but the Thule Interstate Rooftop Cargo Bag part # TH869 tie downs will most likely not reach the cross bar with that much overhang like you mention. I looked up your vehicle's factory roof rack and it doesn't look like it has raised rails either so it would be difficult to tie a bag that size down with a cross bar spread of 30".
I recommend to use the Rightline Gear Sport 2 Rooftop Cargo Bag part # RL100S20 which will hook on the inside of the vehicle without... view full answer...
There are no aftermarket crossbars that will work on your 2018 Infiniti QX60 that already has a roof rack. The only way to add a roof rack is to have your entire factory roof rack assembly removed - the crossbars and rails - and convert your QX60's roof ro a naked roof.
Only if you did that would you be able to utilize a roof rack, and there is one with 54 inch crossbars that would fit a 2018 Infiniti QX60 with a naked roof; the Rhino-Rack Vortex Aero Crossbars # RRVA137B-2.
To complete... view full answer...
Yes, the Yakima JayLow Kayak Roof Rack item # Y04073 will fit on the Rhino-Rack Vortex Aero Crossbars item # RRVA137B-2. The rest of the parts you will need to attach these crossbars to your 2020 Infiniti QX60 are listed below. They do come with locks and keys.
Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs - Qty 4 item # RRRLKVA
Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof item # DK339 view full answer...
You will be able to keep your spare tire mounted under the vehicle following the installation of the etrailer # e73AR. The spare tire will need to be lowered or temporarily removed to install the hitch. Once the hitch is installed, you won't have any issues putting it back into place. The only exception would be if you added some kind of aftermarket spare with an oversized tire.
Temporary removal or lowering of the spare is very common for hitch installation. The reason you don't see... view full answer...
The best option to add a trailer hitch to your 2007 Trailmanor 2720SL with a is either the Curt # 13703, which works on box frames, C-channel frames, or I-beam frames.
There is also the Ultra-Fab # UF35-946403 which welds onto I-beam, C-channel or rectangular trailer frames, but note that a gusset may be needed to weld onto I-beam frames and a plate may be needed to weld onto a C-channel frame, which is why the Curt is a better option overall.
In terms of a bike rack, there is a 3-bike... view full answer...
Great news!
I spoke with my contact at C.E. Smith and she informed me that the trailer # CE48810 that you were looking at will work great for your inflatable boat.
I have linked the trailer to this page for you purchasing convenience. view full answer...
I have a basket solution for you. While there is a way to attach the Inno Shaper 100 if you have aero-style crossbars on your 2018 Infiniti QX60, but the solution will only work if you have compatible t-slot channels in your current crossbars. I went ahead and attached a picture of the required t-slot dimensions to this answer. I recommend that you measure your channels to make sure the Shaper 100 will fit. Also, Inno only provides this basket in a black finish. This is the # INXA569.
If... view full answer...
The Hollywood Racks Sport Rider SE Bike Rack for 4 Bikes item # HR1400Z is a great bike rack and one of the reasons is that it includes a set of keyed-alike locks that secure your bikes and the rack itself from theft.
The hitch lock is built into the pin you attach to your vehicles receiver. The frame hooks that hold your bike in place have built in locks as well. The included cable lock can be ran through all of your bikes as an extra level of security.
I have attached a couple of close... view full answer...
SportRack does not list fit information for the 2014 Infiniti QX60, however, we can determine if the SportRack Horizon Cargo Box, # SR7016, will fit based on the dimensions of your roof rack. This cargo box will fit most factory roof racks with a minimum crossbar spread of 23-5/8 inches. The crossbar spread is measured from the center of the front crossbar to the center of the rear crossbar. Also, the crossbars cannot be wider than 3-1/4 inches. view full answer...
There is a solution for you, but the HitchMate Threaded Lock # HE6001 will not work with your Kuat Transfer 2. You'd want the Cable Locks and Hitch Lock for Kuat Transfer 2 Bike Rack # PTSCLK12, which includes a hitch lock that attaches to your existing threaded hitch pin. The kit also includes a pair of cable locks to secure your bikes.
I've added a link to a video review of this lock set for you to check out as well. view full answer...
Yes it does; the correct fit for your 2023 Honda Civic is indeed the following part number from Draw-Tite:
- Draw-Tite Sportframe Trailer Hitch Receiver # 24954
The # 24954 will fit both the Sedan and Hatchback models of '23 Civic. view full answer...
The Thule Canyon XT Roof Cargo Basket - Steel - 49" x 40" x 6" # TH859XT will fit your Infiniti QX60 as long as the crossbars are between 20" - 37" apart on center and as long as they are not more than 3-1/8" wide x 1" tall. I recommend measuring your crossbars to make sure they fit within these parameters.
The cargo weight will be restricted by your roof rack as the carrier rated for 150 lbs will meet or exceed the vehicle roof rack capacity.
You may want to consider adding the Thule... view full answer...
For your Inifinity QX60 we have confirmed the fit for only the following 3 racks:
Malone Hanger 3 Bike Rack - Trunk Mount - Adjustable Arms # MPG2139
Malone RunWay 3 Bike Rack - Trunk Mount - Adjustable Arm # MPG2142
Saris Bones EX 3 Bike Rack - Adjustable Arms - Trunk Mount # SA803
I have attached videos of each to assist. I also recommend adding the Thule security strap # TH533 to secure the rack to your vehicle and then a cable lock like # 8419DPF to secure your bikes. If you have... view full answer...
Since the front/rear trays that come on the Yakima HoldUp 4 Bike Rack # Y02443-2 are the same for both the regular rack and the Plus 2 2-Bike Add-On # Y02446 I see absolutely no reason why you can't simply install the trays onto the Replacement Spine # 8890277 to have a 2nd HoldUp bike rack.
Please note that if you want to use these bike racks apart from each other you'll need a second hitch bolt and clip # Y8890200. If you want to upgrade the bike rack to include a lock on the hitch pin... view full answer...
We haven't tested the Malone # MPG902 specifically on a 2019 Infiniti QX60, but I can tell you how to measure to determine whether you'll get any interference with the antenna or the rear hatch. For the rear hatch, you'll need at least 16" between the rear crossbar and the line where the roof meets the rear hatch for the box not to interfere with opening it completely.
When it comes to the SiriusXM antenna, typically a roof box will not interfere with reception with empty and as long... view full answer...
To add a 7-way to your 2014 Infiniti QX60 what you'll need is the Factory Style 7-Way and 4-Way Flat Vehicle End Trailer Connector # N40975.
Then for a brake controller and wiring harness, the best value for a controller is the Tekonsha BRAKE-EVN Trailer Brake Controller # TK63VR, with the correct harness for your QX60 being the Wiring Adapter # 3050-P. view full answer...
We do have a Curt hitch that fits your 2017 Infiniti QX60 with the part # C13126. This has a 600 lb tongue weight capacity so it would work great with a hitch carrier like you mentioned.
I attached an install video for you to check out as well. view full answer...
The correct Curt T-Connector Vehicle Wiring Harness for a 2020 Infiniti QX60 is part # C56281. In regards to the installation of the trailer connector harness, this will require an additional ground so you'll either need to find a factory ground stud to tie into or make one of your own with a self tapping screw. This extra ground is needed as the factory ground is determined to be too weak for the aftermarket harness by the manufacturer.
I don't recommend using the Replacement Wiring... view full answer...
Both the Thule Motion XT # TH629706 and the Yakima Skybox NX 16 # Y45AV will fit the factory roof rack of your 2014 Inifinit QX60.
To determine if you will have enough space to open your rear hatch with either box installed, you'll need to measure from the center of your front crossbar to the seem where the hatch and roof meet. For the Thule this will need to be at least 51-1/4 inches and the Yakima at least 47 inches.
Both boxes include locks to lock the box closed and secure it to... view full answer...
Go To Results