Expert Answers about Ford Edge
- Programmer for 2008 Ford F-250 that Can Adjust Speedometer by Tire Size
- The Edge Inisght cannot update tire size info to correct a speedometer. You'd have to go with a programmer instead like the Edge EvoHT2 part # EP86040 to be able to accomplish that.
view full answer... - Best Way To Increase Horsepower and Torque in a 2015 Ford F-150 with a 3.5L EcoBoost Engine
- The 3.5L turbocharged EcoBoost engine in your 2015 Ford F-150 can experience huge gains in horsepower, torque and fuel efficiency when paired with a performance tuner such as the Edge Gas Evolution CS2 Performance Tuner part # EP85350. The Edge CS2 comes preloaded with 4 custom tunes that will allow for your vehicle to see increases in horsepower, torque, and fuel economy up to 43 HP and 73 TQ respectively. In addition to increased performance, the Edge CS2 will allow you to adjust several...
view full answer... - Is Edge Evolution Compatible with Cold Air Intake and Throttle Body Spacer on 2006 Ford F-150
- Our programmers like the Edge Evolution part # EP85350 are designed to work with the smaller bolt-on modifications that your 2006 Ford F-150 has. An intake and throttle body spacer would work well with a programmer.
This programmer can add up to 35 horsepower and 45 ft lbs of torque to your 5.4 liter engine as well.
view full answer... - Edge EvoHT2 Hand-Held Performance Tuner for 6.4L Diesel
- All performance tuners/monitors offered for your 6.4L V8 2008 Ford F-250 turbocharged diesel are shown on the linked page, and the Edge EvoHT2 Hand-Held Performance Tuner # EP16040 is among them. According to my technical contact at Edge your engine can gain up to 80 more horsepower and up to 200-lb-ft of additional torque when you select the performance towing tune.
This tuner does not affect/disable the truck's fuel management system (which shuts down some cylinders for efficiency)....
view full answer... - Performance Chip Recommendations for 2004 Ford F-150 5.4L V8 Truck
- We do offer programmers for your 2004 Ford F-150, however the Bully Dog Triple Dog is not compatible for your vehicles model year. Bully Dog does not make a programmer for your specific make and model of truck.
I recommend the Edge Evolution CS2 Performance Chip # EP85350 for your vehicle. It maximizes energy efficiency for bigger gains in horsepower and torque and features gauge displays keeping you informed about your F-150s performance. The Evolution CS2 comes with pre loaded tunes...
view full answer... - Suspension Enhancement Recommendation for 2020 Ford F-150 Towing 5th Wheel Trailer
- The RoadActive Suspension Kits like the # RAS3611-YHD will be your best option. This kit gives you the adjustable suspension support you are looking for without ruining the unloaded and loaded ride quality like other options are known for.
view full answer... - Cold Air Inake for 2015 Ford F-250 with 6.2 Liter Gas Engine
- For your 2015 Ford F-250 with a 6.2 liter gas engine we have the Edge Cold Air Jammer Intake part # EP18215-D which will give you a couple more miles per gallon as well as free up 10-15 horsepower or so. This is best and only option we offer.
view full answer... - Performance Programmer for a 2006 Ford F-150 4.6L with Modified Intake and Cat-Back Exhaust
- Edge Evolution programmer # EP59YR fits the 2006 Ford F-150 with 4.6 liter. They are designed for and tested on stock trucks so the mods you have made could cause an overly lean air/fuel ratio which could damage the motor.
Superchips Flashpaq programmer, # SU4845, is California approved (can still be used in all other states) is a better option considering the modded intake on your truck.
view full answer... - Are Programmer Mounts Available In Different Colors
- The different pod mounts for the different programmers that we carry do not come in alternative colors. However the mount can be painted to match the interior of your vehicle.
The Edge Evolution # EP59YR includes a dash mount in the kit negating the need for a pod like the older Edes. Check out the video to see the mount and how it works for your 2006 Ford F-150.
view full answer... - Tuner that Works with Aftermarket Cold Air Intake and Exhaust on a 2010 Ford F-150 4.6L
- For a programmer that is going to help with towing and that will work with cold air intake and exhaust upgrades I recommend the Flashpaq # SU4845. It has several tune options including 2 different tow options.
The Edge programmers have a note in their instructions mentioning not to stack performance products like intake and exhaust when using the tuner so I do not recommend any of them for your 2010 Ford F-150.
view full answer... - Why Would an Edge Product Installed on a Truck Not Have Power Level Adjustments
- Since you said you couldn't find a power level option on the Edge programmer you have on your 2008 Ford F-250 there is a great chance you actually have an Insight Monitor like part # EP84030. This product only allows you to look at various engine parameters and has no programming capabilities.
If your truck is a diesel you would want the part # EP96TR for a programmer/monitor.
view full answer... - Can an Edge Evolution Programmer be Used on More than One Truck
- The older programmers only worked on one vehicle at a time to prevent people from just passing around. To move it to a different vehicle, it had to be unpaired from the old vehicle and then had to be re-registered with Edge for a fee.
Programmers like # EP96TR, and many from this generation, have the ability to add vehicle licenses to tune multiple vehicles with 1 product. Both vehicles would have to be compatible with the tuner.
view full answer... - Will the Edge Insight Work on a 1999 Ford Ranger with 3.0 Liter Flex Fuel Engine
- Provided that your 1999 Ford Ranger has an OBD-II port, you can use the Edge Insight, # EP84130. You will not need any other parts for it to function. Please note that the Insight is a comprehensive gauge display unit and does not allow you to tune the engine. It can only monitor various parameters such as:
Battery Voltage
Intake Air Temperature (IAT)
Engine Oil Pressure (EOP)
Engine Coolant Temperature (ECT)
Engine Oil Temperature (EOT)
Transmission Fluid Temperature (TFT)
Miles Per...
view full answer... - Performance Tuner for 1997 Ford F-250 with 4.6L Gas Engine
- For your 1997 Ford F-250 Super Duty with 4.6L engine we offer the Edge Gas Evolution CTS2 tuner # EP85350. This tuner can provide gains of up to 15 more horsepower and torque increases up to 20-lb-feet.
Please refer to the linked article for more on performance chip tuners and monitors. Please note these are not legal for use in California.
view full answer... - Recommended Performance Kit And Backup Camera For 2016 Ford F-450 Cab And Chassis
- For your 2016 Ford F-450 Cab and Chassis, the Edge Stage 1 Performance Kit w/ Diesel Evolution CS2 Programmer and Jammer Air Intake, # EP19003, you asked about has 3 settings to increase horsepower and torque. Setting 1 will give you an additional 39 hp and 73 lbs torque to your factory settings. Setting 2 will give you 73 hp and 153 lbs torque. Setting 3 will give you 109 hp and 234 lbs torque. This system is not legal in California.
For a dash board mounted backup camera system,...
view full answer... - Edge Insight Comprehensive Gauge Display Reading Turbo Boost on 2007 Ford F2-350
- The Edge Insight Comprehensive Gauge Display, # EP84030 will monitor the turbo boost. It will read this information through its connection to the diagnostic port, no other attachment would be necessary. I have confirmed this with the Tech department at Edge.
Keep in mind that the Insight is a Gauge Display only, it is not capable of altering the engine tune. To actually alter the tune, you would need the Edge Evolution, part # EP85300 or the touch screen version, # EP96TR. This combination...
view full answer... - Will the Edge Evolution Programmer Fit a 1999 Ford F-250 with 5.4 Liter Motor
- The Edge Evolution CTS3 programmer # EP59YR is indeed a fit for your 1999 Ford F-250 with the 5.4-liter motor. My favorite feature of this programmer is actually the large touch screen display. With a lot of programmers, the displays are fairly small and can be hard to see. This one has a 5-inch (diagonal) display, so visibility is not an issue.
You can also add a custom dash pod # EP28500 to make the addition of the programmer appear more like a factory component. This dash pod can be...
view full answer... - Monitor Recommendation for 1999 Ford F-250 to Monitor EGT and Transmission Fluid
- For your 1999 Ford F-250 you would want the monitor part # EP84030 which gives you the ability to monitor the transmission temps like you are wanting (plus other info) but then to also monitor the EGT you'll need the sensor kit part # EP98620 which runs a probe to the exhaust to deliver that information as your truck does not currently have a sensor for the Edge to read from.
view full answer... - Does the Edge Performance Kit Part # EP19130-D Fit my 2015 Ford F-350 4x4
- Yes the Edge Performance Kit w/ Evolution CTS2, Jammer Air Intake, and Exhaust part # EP19130-D is specifically designed for your exact truck with the 6.7L Turbo Diesel.
view full answer... - Tuner for 2012 Ford F-150 5.0L with Aftermarket Cold Air Intake and Exhaust
- Edge has a section in their instructions that states you should not stack performance products and use their tuners so I do not recommend them since you have aftermarket cold air intake and exhaust.
I recommend the Flashpaq # SU4845 for your 2012 Ford F-150 5.0L. It will do everything you are looking for and it works well with aftermarket exhaust and cold air intake.
view full answer...
Go To Results