Why Would an Edge Product Installed on a Truck Not Have Power Level Adjustments

Question

Question:

I purchased a 2008 f250 with the edge product an dont know how to use it but it also has no power level option on it what can I do ? An does it need to be updated somehow

asked by: Tony T

0

Expert Reply:

Since you said you couldn't find a power level option on the Edge programmer you have on your 2008 Ford F-250 there is a great chance you actually have an Insight Monitor like part # EP84030. This product only allows you to look at various engine parameters and has no programming capabilities.

If your truck is a diesel you would want the part # EP96TR for a programmer/monitor.

expert reply by: Jameson C

0

Answer 1

The Edge Diesel Evolution CTS3 Performance Tuner #EP96TR referenced in your question is confirmed to fit your 2002 Ford F-250 7.3L Diesel. I can't be certain what your local shop is referring to with regards to an existing chip on your truck but…

view full answer...

Answer 2

I checked with Edge and they do make a custom mount for the Edge Diesel Evolution CTS3 Performance Tuner part #EP96TR and your 2008 Ford F-250, the Custom Dash Pod for Edge Monitors that has a CTS3 adapter is the part #EP28500. However, this is a…

view full answer...

Answer 3

That means the programmer you have was installed on a different vehicle and wasn't returned back to stock before you got it. These can only be programmed to one vehicle at a time, so you'd have to track down the original vehicle the…

view full answer...

Answer 4

When installed on your 2000 Ford F-250 7.3L Diesel Engine, the Edge Evolution CTS3 Performance Tuner #EP96TR that you referenced will give you up to 120 horse power and 315 ft lbs of torque. This tuner will plug right into the truck's OBD-II port…

view full answer...

Answer 5

With the Edge Diesel Evolution CTS3 Performance Tuner #EP96TR installed on your truck when towing you'd most likely see around 2 more miles per gallon but it's really pretty hard to say. You also can use it on the highest power level too.…

view full answer...

Answer 6

For the Edge CS2 Evolution Diesel Tuner you will need to enter the programming menu. You will turn on your vehicle without starting it. Then use the Menu button to open the main menu and scroll down with the arrow to the Programming on the screen.…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hey Jairo. So we do not offer a direct replacement for the Norcold N611, but we do have a good replacement option for you. It really comes down to what will fit in your cutout space. Take a look at the Norcold RV Refrigerator w/ Freezer - 8.2 cu ft -…

view full answer...

Answer 9

Yes, the Edge CTS3 Programmer part #EP69YR is easy to install and is a confirmed fit for your 2004 GMC Sierra with a 6.6 liter diesel engine. It will give you up to 135 horsepower and 240 ft lbs of torque so you'll notice quite a bit of…

view full answer...

Answer 10

You can unplug the Edge CTS3 tuner like part #EP69YR after the tune is installed on the truck and the tune will not be affected. The tuner would need to be plugged in to use the display or the change the tune levels.

view full answer...

Answer 11

Yes, you can use Curt trailer wiring harness #C56197 on your 2015 Chevy Camaro with incandescent lights and trailer with LED lights. I have included a link to the installation instructions for you.

view full answer...

Answer 12

Weight distribution works to distribute the tongue weight of a trailer up to the front axle of the tow vehicle so that it will sit more level and handle/brake better. That being said the systems do not "reduce" tongue weight or allow you to…

view full answer...