I spoke with Lippert and they informed me that you have a Kwikee 25 Series Step therefore the correct replacement motor for you is the Lippert Components Kwikee Step Motor for 25 Series part # LC369506. The part number number you provided of "909509000" was used to reference the above. view full answer...
The Jensen Stereo # JWM60A will replace a Memorex CDR-1000 in your RV. The cutout for the Memorex from my research is 5" X 8 1/2" and the Jensen is 6" x 9" so you may need to increase the size of your cutout. The Jensen system is really nice and definitely worth the upgrade with the ability to use CD/DVD, USB, and Bluetooth. It has 2 video outputs for your DVDs. view full answer...
I checked with MaxxAir, and there are no brushes available for the replacement motor, which is the Replacement 12-Volt Variable Speed Fan Motor for MaxxAir MaxxFan RV Roof Vents # MA10-20968.
So if there is an issue with the operation of the motor, you would need to replace the entire motor assembly.
I have added a link below to a video review for you as well of the Replacement 12-Volt Variable Speed Fan Motor for MaxxAir MaxxFan RV Roof Vents # MA10-20968. view full answer...
I tried looking up what vents came on your 2011 Coachmen Chaparral 268RLE but unfortunately it doesn't look like Coachmen kept a record of that. If you can let me know what brand you have I can see if we have a replacement screen for it as these are specific.
I can definitely help you find a replacement dome lid as well! These are pretty universal and all you need to do is note what kind of hinge your current lid uses; 3-point, 4-point, or continuous. If you aren't sure the manufacturer... view full answer...
For your 2013 Fleetwood Express, the correct replacement is most likely the 4-Leaf Double-Eye Spring part # e54SR. In order to confirm this you will need to take a quick measurement of the leaf spring you have now. It should be around 26" long (loaded) from the center of each eyelet and if that is the case then the above is what you need. The leaf springs on a trailer will lengthen over time as they wear which is why the replacements will be shorter than what you have now.
The pair of... view full answer...
Thank you for the picture which allows me to confirm the correct parts. Your Dexter D52 axles under your 2018 Coachmen Freedom Express Blast 271BL toy hauler came with the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-458-459. We do have the Left # K71-675 and Right # K71-676 hand shoe assemblies if you only wish to replace the shoes. This was paired with the Dexter Trailer Hub and Drum Assembly # 8-201-5 if your current drums are wore past their usable limit. We do have the Bearing... view full answer...
Thank you for the pictures and information provided. While the Atwood 75721 motor and gear boxes are discontinued, we do have a gear box that will work with your Atwood 75721 motor and landing gear.
- Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies # LC276602
The Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies # LC276602 is made of aluminum. view full answer...
The correct replacement steps for your 2013 Coachmen Mirada is the Kwikee Electric RV Step Complete Assembly # LC372261. This comes with all new parts including the motor, control unit, switch kit, and light. Attached is a review video of this step assembly for you to check out. view full answer...
We do have something for you. I was able to locate the owners manual for your 2000 Coachman Catalina 5th wheel, which told me that Lippert is the partner they use for their landing gear. Unfortunately they do not tell you what system exactly is used or measurements, this is not uncommon as they do not always use the same system for everything. It often comes down to availability.
Landing gear jacks are often interchangeable with each other so you would need to look at the bracket stop... view full answer...
We do have the replacement Spur Gear for Lippert In-Wall Slide-Outs - 16-Tooth # LC58VR that you need. We also have the Lippert Replacement Standard Bearing Block Kit for RV In-Wall Slide-Out # LC379060 should you end up needing the bearing blocks as well. Unfortunately we do not have just the plastic caps (shoes) for the bearing blocks. view full answer...
The Lippert 5,200 lb axle you have has a hub face to hub face of 86.5 inches which is identical to the Dexter # 8327816 you referenced, however the 68.5 inch spring seats of your Lippert axle are not identical to the 71.5 inch spring centers of the Dexter axle. They do use the same spindles so the bearings and grease seal will all match. You would simply need to weld spring seats onto the axle at the 68.5 inch on center locations using # TRSS300. view full answer...
The Air Lift system that fits your 2011 Coachmen Encounter and uses the 5810 air bag is the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers # AL88240 which uses the Replacement Air Spring for Air Lift LoadLifter 5000 Ultimate System # AL84264.
The actual part number for the Replacement Air Spring for Air Lift LoadLifter 5000 Ultimate System # AL84264 air bag is 58470. I have included a picture that shows this so you can see where you would check your air... view full answer...
The 334850 part number you mentioned refers to the Replacement Control Switch # LC334850. This particular unit replaces the control switch assembly for certain Lippert Tread Lite RV Steps ( # LC353542, # LC353543, # LC353620, or # LC353621). view full answer...
Dexter designed the # K71-652-00 EZ Flex as a direct replacement for the 013-104 equalizer.
If you didn't want to use that, the Lippert Equa-Flex # LC279687 should be close enough in height. Lippert tells me that if the height difference was any greater, you'd need to go with a shorter equalizer hanger to account for the height difference, but a 1/2 inch height difference shouldn't cause any problems.
If you click he provided links, you can see some installation videos that you might... view full answer...
What I think you are asking is if you can replace within a current system, a valve assembly of one manufacturer with that of another. Yes, the fitment of valve assemblies is industry standard in dimensions. A Valterra 3" can be replaced with a LaSalle Bristol such as the # 34466N4AB72GMA. If you are asking about interchanging individual components within the assembly, we cannot guarantee fitment within that exchange. view full answer...
What you need is the Replacement RV Air Conditioner Cover for Penguin and Dometic Air Conditioners # AT3308046006. This is the correct shroud for your Dometic 600312.321. view full answer...
From the information available to me, the Greystone Standard RV Microwave w/ Trim Kit, # 324-000105 does not have the exact measurements as the Advent microwave, but they are very similar with a slight difference in height, less than and inch. However, with use of the trim kit I think the Greystone, # 324-000105 will replace your Advent microwave. They are both 0.9 cubic feet and 900 watts. view full answer...
Per conversation with Lippert, the Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor # LC141893 is a compatible replacement for the 1-065-041012-01 electric motor you listed. view full answer...
The Lippert screen door latch # LC201472 is the traditional fit. I've linked the page to all the options we carry for you but none of them have the channel you showed in the attached picture. You may need to create that channel if it is required for your unique screen door. view full answer...
We have a direct replacement for your 2019 Coachmen Apex Travel Trailer!
Check out the:
-Trailer Wheel Center Cap Plug # CCP-60C.
This center cap has an overall diameter of 2-3/16", an inside diameter of 1-13/16" and is made from ABS plastic. view full answer...
Go To Results