These stylish wheel covers fit your vehicle that has 16", 8-lug wheels with 8 hand holes. The plastic covers are finished with mirror-polished stainless steel, and they easily snap into place - no hardware required.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello everybody, this is Jeff at etrailer.com. Today, we're going to take a look at this front and rear set of 16" Namsco wheel covers for eight lug wheels. It is for a quantity of four covers. This will replace a wheel cover; it will fit over the front and the rear wheels on your vehicle. You can see it's a nice, low-profile design. It delivers a nice, sleek look, and it is a 304 stainless steel construction, which is very sturdy and rustproof.
You can see they have a nice, mirror finish on them to add a nice, eye-catching shine to your wheel. These are described as an eight inaudible 00:00:33 design wheel, and what they're talking about is these holes around the outer edge, there's eight of them, so they're called an eight inaudible 00:00:40 design. These lug caps right here, they are removable; they have four snaps on them. You could actually pry those caps off and access the lug nuts if you need to. This does use a snapping retention system to ensure the hubcap won't wobble or fall off your wheel.
Just to zoom in to show you that a little more closer, you can see how this will push onto your steel wheel and hold it into place; there's no hardware required.I do want to mention that, if you look, there is a cutout area right here you can see on this retention system, and that's cut out for the valve stem. When you do install these, you always want to make sure to align your valve stem up with this cutout, and then go ahead and push the wheel covers onto the wheel. That cutout keeps it from damaging your valve stem. This is for a quantity of four wheel covers. The application, again, fits eight lug front and rear wheels.The diameter wheels this fits is 16".
A couple of inaudible 00:01:37 on these wheel covers. These wheel covers will not fit the Budd wheels or the older split rim wheels; those are two older design wheels. The Budd wheels are the stud-piloted wheels that have tapered stud holes, and they use lug nuts with a matching taper. The split rim wheels are the older design wheel that has a split ring around the wheel; that is designed to hold the tire to the wheel in case of a blowout. Both of those are older designs that aren't used much anymore.
These will not fit those, but they will fit all the other ones. That should do it for the review on the front and rear set of 16" Namsco wheel covers for eight lug wheels.
Perfect set!
Good product really happy
Perfect fit look great,
Fit perfect one was dented and they said a new one would be sent I like you can talk to someone
Thought they were plastic and surprised to see metal covers. Ordering was easy and fast. Product arrived in good condition and in a timely manner. Communication great on their part as to order status. Highly recommend.
First class product. Complete and ready to install. I am a VERY SATISFIED customer.
Shipped quick. One was dented up bad. Contacted etrailer they got a new one issued ASAP. Nice job seriously on the service. My only disappointment is one of the 4 do not really stay on the rim. I have rotated them around and it is that particular cap. I do not necessarily see what is wrong nothing appears damaged. So I will re-use one of the old ones I guess (I have the same ones already). So that is why I only rated Namsco as 3 star.
They are a great update to my 1994 Fleetwood motorhome. It looks really sharp.
These wheel covers were exactly what we needed and at a great price. It was super easy to order and they were delivered do quickly! We appreciate it!
Good value. Fast free shipping. Came with all the hardware to install.
Hubcaps got here very quickly. I liked that. They were just what I wanted. Put them on drove 6 miles and when I stopped 2 of them were gone.
I have worked in tire shops and know how to put on hubcaps.
Presently riding my bike around looking for them
This is the third time ordering from etrailer as always customer service is excellent and product is just as pictured.
1 cover defect and other very hard to have them on the car. The quality is horrible, the edge doesn't cover the wheel and is waves with gaps around!! I tried to remove and put it again , my wheel is all scratched and I cut 2 fingers so bad!! Willing to take actions about this product safety and the option to buy" I will never buy this covers". This is a real review, not a competition or other scam!!
I am extremely happy with my new hubcaps. I could not get them in Canada. Also, the hubcaps were 16.5 and hard to find here. The places I called in Canada told me it would take a year and a half to get.
I called etrailer direct and they had them in stock and shipped them to me immediately. I liked the email they sent with tracking info and I watched it along the way. The customer service was excellent. 2 hubcaps were damaged and etrailer shipped me replacements immediately, no fuss, no back and forth...they took care of me.
I highly recommend etrailer. I would like to than Noah and his team for all their excellence.
etrailer had all of the correct information online that I needed to know in order to determine this product would fit my rv. Shipping was super fast and customer service was great. Thanks etrailer!!
Great Wheel Covers, and they stay on very sturdy! Highly recommend to anyone looking for a set for their units
Excellent service and products Jerry also recommended a rim for my new motor home spare and he was right on. The rim arrived in 3 days. WELL DONE
they dont stay on the tire rim. i drove to KY from TX I lost one in each state as I drove. TX, AR, TN & KY Bummer because they dressed up the look of my trailer.
We put these on our living quarters horse trailer. They fall off after 6-8 months. Not worth buying.
They fit great, hopefully they can withstand a little hard work. I’m Looking forward to shopping again
J.T. Was on advice and follow-up. Product look# great and arrived
On time as promised.
I purchased the set for my MB Sprinter and 1 cover was defective from the first day. The customer service was polite and sent me another new cover. I received the cover and set up the all set. After the first trip my neighbor told me when I parked my Sprinter, there was a big noise coming from the wheels when i"m driving. I scheduled a visit to the Mercedes Dealer Schaumburg thinking maybe there were some brake problems and after 1 short ride, they told me the noise coming from the wheel covers because they don't have any silicon around how the other covers have. I got a video and if you can notice the sound , make my Mercedes run like a garbage can.If they will not solve my problem, I will start the charge back with my bank , there is too much headache with this set of wheel cover, they are cip but actually they are NOT good , they all coming defective, making this noise and bother all my riders I' can't use them and is not actually my problem , this is the seller problems and between them and manufacturer, the descriptions are not accurate, they doesn't explain the covers will make "crazy noise", if I will know about that I will never buy them ...
Do you have a question about this Wheel Covers Hubcap?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.