bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class IV
  4. 2 Inch Hitch
  5. 10000 lbs GTW
  6. Visible Cross Tube
THIS ITEM IS NOT A FIT FOR
2016 Ram 3500
Draw-Tite

Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"

$305.41
Retail:$491.86
You Save: $186.45
Trailer Hitch
Not Confirmed to Fit

2016 Ram 3500

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Specially designed to meet your heavy-duty towing needs, this fully welded, corrosion-resistant vehicle trailer hitch receiver features Draw-Tite's Tested Tough guarantee, ensuring performance that exceeds industry standards. Great Prices for the best trailer hitch from Draw-Tite. Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" part number 41906 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (56)
  • Q & A (0)
  • Photos

Draw-Tite Trailer Hitch

  • Class IV
  • 2 Inch Hitch
  • 10000 lbs GTW
  • Visible Cross Tube
  • 1000 lbs TW
  • Draw-Tite
  • 12000 lbs WD GTW
  • For Towing
  • 1200 lbs WD TW

Specially designed to meet your heavy-duty towing needs, this fully welded, corrosion-resistant vehicle trailer hitch receiver features Draw-Tite's Tested Tough guarantee, ensuring performance that exceeds industry standards.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class IV
    • Maximum gross trailer weight: 10,000 lbs
      • Maximum GTW when used with weight distribution: 12,000 lbs
    • Maximum tongue weight: 1,000 lbs
      • Maximum TW when used with weight distribution: 1,200 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



41906 Draw-Tite Class 4 Trailer Hitch Receiver - Ultra Frame

81515 Hidden Hitch Class 4 Trailer Hitch Receiver

Item # 41906

Installation Details 41906 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.9

56 reviews
Specially designed to meet your heavy-duty towing needs, this fully welded, corrosion-resistant vehicle trailer hitch receiver features Draw-Tite's Tested Tough guarantee, ensuring performance that exceeds industry standards.

by:

Good fit, super strong, drilled a few holes and bolted up just fine. Borrowed a torque wrench from my friend, put the icing on the cake. Very pleased, will get my boat in the water soon!! Thanks, Lothar



by:
Ford E-350

Best pricing and serviceI have an E350 Ford van and ordered #41906. Knew there would be some drilling. Understand that you probably don't have a 9/16" metal bit ($20) or a 13/16 and 7/8" socket in your toolbox. You have to get them tight so an adjustable wrench may not work. The other holes lined up great. Make sure to use oil when drilling! This hitch is extremely solid! By ordering through E-Trailer I was able to get the heavier duty hitch for a cheaper price than having lighter one installed at a shop. They shipped very fast and knew what they were talking about!



by:

Best quality product. It is so easy to install but a bit heavy for me so I had a friend help me and we got it done in about 20 minutes. Item 41906 fit my Ford 1995 Club Wagon XLT. I didn't know which one you pick @ etrailer website, so I left a message and etrailer reply and guide me through. etrailer products and the support I got no complain about.

David profile picture

David

8/14/2020

Working out very well



by:

The product gets all 5 stars. I have a 1997 E-350 Ford van. Fits perfect. Solid strong hitch definitely worth the money. Minimal modifications to the van. Had to increase the hole size in frame to accommodate larger bolts for class IV. Took forever for shipping, which I understand shortages and the time it takes. The problem was etrailer took my money, then put it back in my account, 3 times! It happened over and over again over the course of a month. The transaction would just disappear on my account activity. It screwed up my balance. Not the end of the world. Just slightly frustrating. I would still recommend product

Sierra K. profile picture

Sierra K.

6/29/2021

Thank you for your review. The payment authorization appeared to disappear and charge again because it took awhile to get the product ready for shipping. We do not charge until we ship.

John profile picture

John

6/26/2022

Tough hitch. Ive pulled 13000 pounds with it no prob. Its been a year and no rust. Paint looks great still. Just bought the front hitch for my van from etrailer, but I havent gotten around to installing it yet.



by:

Hello,
Thanks for the reminder. I meant
to give a review soon after using your product. But I most admire the staff an it's knowledge of the hauling business. After telling and answering the salesperson(s) with whom I spoke with, they sold me only what I needed. After assessing my needs and getting the information on the hauling vehicle and what I would be hauling a package was put together based on that information.
When the package didn't include a distribution system, I phoned the salesperson and was told it wasn't included because based on the information I had given, I didn't need it. And they were sooo right.
When I went to pickup the trailer, the salespeople were surprised that my vehicle handle the weight without a distribution system just as Etrailer's Rep had said. I was surprised because my hauling vehicle didn't bulge. I asked is the traler connected and the sales Rep of the company I bought the trailer from said, its on there. He then took notice of the hitch and my vehicle and told the other sales person that the hitch was at least 8,000 lbs and my vehicle was a E250.
However, since I had no experience in hauling a travel trailer, he said he would follow me for awhile to make sure everything was alright. And it was, just as your sales Rep had told me.
I went over dips and bumps with not problems (no compromise in steering (the front end stayed glued to the ground.
In closing, I would like to say, thank you and your staff for not selling me something I didn't need just to make an extra buck. I will recommend all to by their hauling needs for e-trailer.

James A



by:
2011 Ford Van

I have purchased many items from ETrailer, including a hitch and truck cover. I’m extremely satisfied with all of my purchases and I look forward to continue working with ETrailer. The truck cover and hitch are both of great quality! I recommend everyone in the market to ETrailer.



by:

This hitch was above all expectations. eTrailer fast shipped by UPS who left it by my door. I was surprised on how much it weighed. It is a really strong DrawTite Ultra hitch, which was at an outstanding price. eTrailer was lowest price again, like always for towing related and accessories items. Provided great customer service by even measuring mounting hole to make sure it would fit exactly and easily on my motorhome. Thanks eTrailer for another great job.



by:

Took me a while but it's on there for good now.



by:

Very strong hitch not very hard to install just drilling holes no big deal this should outlast the van



by:
1998 Ford Van

This hitch was better than I expected. It was much heavier and well manufactured. The video on the website explaining installation was easy to understand and made installation easy. This hitch and light accessories were far superior to those sold at UHaul and auto part stores.



by:

My class IV trailer hitch arrived in perfect condition in 3 days I am extremely pleased with the quality of the hitch and the price that was paid. The installation video makes it look extremely easy to install. This will be soon to be found out



by:
2006 Ford Van

Good quality, easy installation, and fast delivery!



by:

Product was shipped quickly and arrived soon than expected. Mounting video's on the website were spot on and we were able to successfully mount the trailer hitch in under an hour.



by:

Fit like a glove. No problem with installation.

Steven profile picture

Steven

1/14/2021

Thus hitch and all harnesses are perfect. I have had zero issues with it.



by:

Great product bolted on without a hitch! I mean I bolted the hitch on with no problems! Had to purchase a 9/16 drillbit Home Depot about $23.
Thanks again,
Paul Bakersfield Ca.



by:

Product arrived on time and in good condition. Product was as advertised. HOWEVER, Ad said no drilling. when I received product and looked at instructions, the first thing it said was I need to drill 2 holes. Therefore, I had to get someone else to install.



by:

Arrived as stated. Installed the hitch that night and it fit like a glove. Running the 4 way and 7 way wiring today.



by:

Updated old receiver that was cracked with this heavy duty one. Needed to drill a couple holes. Using it for camper trailer.



by:

Hitch was fine. But my van doesn’t like it’s capabilities.



by:

This is a very well made hitch, and a good looking product too. Basically very easy to install, only had to use a step bit to ream out existing frame holes to fit bolts and drill 2 more holes and it was installed. Thanks for truthful product information.



by:
Ford

This hitch has been great. Heavy duty, and well built. Looks good on my Ford e-350 van.



by:

Received hitch. Looks great. Unboxed it
yesterday. Will install next week. I have a 10000lb trailer and excavator to haul with our E350 Van
Mid June. Thanks



by:

Great prices great customer service and fast delivery. I would more than highly recommend etrailer.com. P.s Special thanks to Gwendolyn.



by:

Great product, fast shipping. Thanks!



by:
2003 Ford Van

Very pleased with the fast shipping and it bolted right on with no problems! I highly recommend this company to do your business with.


25
56
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Recommended Trailer Hitch and Roof Rack for 1999 Ford E150 Superwagon
    The Draw-Tite Ultra Frame Trailer Hitch Receiver # 41906 is a fit for your 1999 Ford E-150 Superwagon. It is a fit for 1995-2003 Superwagon models and will install easily with the included hardware. For the roof rack compatible with a Thule Cargo Basket or Cargo Box, I recommend the Inno Square Crossbars - Steel - Black - 65" Long - Qty 2 # INB165 and Inno Feet for Square Crossbars - Rain Gutters - 7-1/2" Tall - Qty 4 # INSD. To add a ladder, I recommend the Surco Universal Exterior...
    view full answer...
    Image 1 for
  • Which Hitch Will Fit a 2004 E-350 Cab and Chassis with 14 Foot Box Truck Body
    For a 2004 Ford E-350 Cab and Chassis the Draw-Tite # 41906 is a custom fit, but you will need to make sure that the bolt holes are 38-5/8 inches from frame to frame in order for it to fit your particular model. While this hitch is a custom fit for the E-350 cab and chassis, it's possible that your box truck body may not have that hole spacing on the frame so you will want to confirm this. I've linked an installation video that can be used as a rough guide, since we don't have any videos...
    view full answer...
  • Recommended Trailer Hitch Receiver, Wiring, And Ball Mount For 1995 Ford E-250
    For your 1995 Ford E250 Van, I recommend the Draw-Tite Ultra Frame Trailer Hitch Receiver Class IV - 2" # 41906. The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13322 will not fit your vehicle. If you will be towing with this hitch receiver, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118344. This harness will install to your factory wiring behind each of your tail lights. You will need to remove either the tail light assemblies...
    view full answer...
  • Recommended Trailer Hitch Receiver for a 1999 E-450 Ambulance
    A great trailer hitch receiver that is compatible with a 1999 Ford E-450 chassis is the Draw-Tite Ultra Frame Trailer Hitch Receiver # 41906. However, we have not had the opportunity to install this on an ambulance so I cannot confirm how it will fit with the rear gurney step. If you check out the picture I attached you can see that the top of the receiver sits about the same height of of the crossmember which is about 2-1/4" from the top of the mounting bracket. You can also see that...
    view full answer...
    Image 1 for Image 2 for
  • What are the Differences Between Curt and Draw-Tite Hitches for a 2009 Ford E-250.
    There are several Curt and several Draw-Tite hitches available for a 2009 Ford E-250, depending on which model E-250 you have. Is your van a Superwagon? How much weight are you needing to pull? This information will help narrow down the hitches that will fit your van and we can look at the differences between those specific hitches.
    view full answer...
  • Does Curt Trailer Hitch 14055 Or Draw-Tite Trailer Hitch 41906 For 2007 Ford E-350 Stick Out Further
    I would be happy to help! The Draw-Tite Trailer Hitch Receiver # 41906 you were looking at measures 18-1/2" from the center of the rear mounting holes to the center of the hitch pin hole where the Curt Trailer Hitch Receiver # 14055 measures 16-3/4" as you can see in the included diagrams. Since you were needing the max distance for your 2007 Ford E-350 with the Service Bed you will want to go with the # 41906. I included videos of the products mentioned for you to take a look at.
    view full answer...
    Image 1 for Image 2 for
  • Dimensions of Draw-Tite Class IV Hitch # 41906
    The hitch you referenced, part # 41906 is indeed a fit for your 1993 Ford E350. If you look at the photo I have edited for you, you can see the relevant dimensions of the Draw-Tite Class IV hitch, part # 41906. I have provided you with the side-to-side and front-to-back center to center bolt hole spacing, the total width, height and drop of the hitch. If there is anything else you needed that you do not see there, please let me know. If you would care to view an install video showing...
    view full answer...
    Image 1 for
  • Measurements for Draw-Tite Trailer Hitch # 41906
    The overall width of trailer hitch # 41906 is 41-1/2 inches. I have included a picture showing this and other measurements for the hitch. This is a custom fit hitch so if you have a 1992 to 2014 Ford full-size van (E series) then this hitch will fit. If you plan on doing some towing I recommend etrailer ball mount kit # EBMK2216. It comes with a ball mount with a 1 inch rise or 2 inch drop, 2 balls, hitch pin with clip, and a storage bag. If the ball mount kit does not have the right...
    view full answer...
    Image 1 for
  • Class IV Trailer Hitch Recommendation for a 1997 Ford E-350 Van
    For a Class IV Draw Tite hitch confirmed as a fit for your 1997 Ford E-350 you would want the part # 41906 which is a confirmed fit. I attached an install video for this hitch for you to check out as well. For trailer wiring you would then want the part # 118344. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes...
    view full answer...
  • Dimensions of Draw Tite Hitch 41906
    I attached a picture that shows all of the relevant dimensions of the Draw Tite hitch part # 41906 that you referenced for you to check out and see if it would fit.
    view full answer...
    Image 1 for
  • Trailer Hitch for 2012 Ford E-350 Van with Standard Bumper
    We offer several classes of trailer hitch for the 2012 Ford E-350 van with standard bumper and all can be seen on the link provided. Draw-Tite offers two Class IV and V hitches, parts # 41906 and # 41945, that offer, respectively, 1000-lbs and 1500-lbs of tongue weight capacity. Both are confirmed by my contact at Draw-Tite to fit the 2012 Ford E-350 van with standard bumper. Both hitches have a 2-inch receiver tube that will sit below the top of the frame rails a distance of approximately...
    view full answer...
  • Class IV Trailer Hitch for a 1999 Ford E450 Van with Utility Body
    The most popular Class IV trailer hitch for 1999 full size Ford vans is Draw-Tite hitch # 41906. Since you will be adding a custom bumper around the hitch and assuming the frame is the same on the E-450 utility van compared to the other E-series models, this hitch should fit. I have linked a video showing installation and the instructions so you can compare them to your fan to ensure fit. I also reocmmend etrailer ball mount kit # EBMK2216 which comes with a ball mount, 2 balls, a hitch...
    view full answer...
  • Recommended Hitch For 1998 Ford E-350 Club Wagon
    For your 1998 Ford E-350 Club Wagon I recommend the Draw-Tite Trailer Hitch, part # 41906. This is a Class lV hitch with a 2 inch receiver opening. When installing the # 41906, the spare tire will need to be lowered for access to the frame and underside of the vehicle, but is reinstalled after the hitch has been installed. You can check out the attached video that shows how this hitch is installed on a 1995 E-350. We do not offer a Class V hitch that is designed to fit your E-350. This...
    view full answer...
  • Will a Trailer Hitch Fit a 2006 Ford E-350 Van with a Knaphiede KUV Body
    If the utility body on your 2006 Ford E-350 van chassis does not sit any lower relative to the frame than on the regular van models you can install a trailer hitch. For example Curt trailer hitch # 14055 will work as long as the bolt holes on the frame where the hitch installs are 38-5/8 inches apart on center. I have linked a video showing an example installation for you. The same goes for hitch # 41945 and # 41906 and a few other hitches for your year E-350 (see link). If the service...
    view full answer...
  • Hitch Recommendation For Higher Tongue Weight Capacity w/ Weight Distribution on 2005 Ford E-350
    You will want to follow the weight limits as specified on the hitch and in the vehicle owners manual. Different hitches will have different construction which results in different classes of weight capacity. Exceeding the weight capacity of the factory hitch or the vehicle can result in damage to the hitch and/or vehicle and is not safe. The hitch you selected, Draw-Tite Trailer Hitch # 41906, has a higher capacity because of the construction and the testing that was done on the hitch....
    view full answer...
  • Does Trailer Hitch from 1999 Ford E-150 also Fit 2001 Ford E-150
    Yes, a hitch from a 1999 Ford E-150 would also fit a 2001. For example, the Draw Tite part # 41906 fits both years and would be a great option. You might still verify the part number of the hitch if you can find it.
    view full answer...
  • Hitch And Towing Components Recommendation For 2003 Ford E-350 Van To Tow 37 Ft Trailer
    You will want to check the owner's manual or with your dealership to make sure you do not exceed the towing capacity for your van. For your 2003 Ford E-350 I recommend the Draw-Tite Ultra Frame Hitch, part # 41906. This is a Class lV hitch and it has a 2 inch receiver opening. The ball mount kit I recommend is the etrailer Ball Mount Kit, part # EBMK2216. This kit includes a ball mount with a 1 inch rise or 2 inch drop, a 2 inch and a 2-5/16 inch trailer ball, the pin and clip, and a...
    view full answer...
  • Would Westin Bumper for 1993 Ford Econoline 250 with Draw Tite Class IV Hitch
    Yes the bumper part # 20107 that fits your 1993 Ford Econoline 250 would fit with the Draw Tite Class IV # 41906 that you have installed as well.
    view full answer...
  • Recommended Trailer Hitch Receiver And Wiring For 1999 Ford E-450
    For your 1999 Ford E-450, I recommend the Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" # 41906. This will give you a 2 inch receiver and is confirmed to fit all models for that year. If you don't have the factory 7 way, I recommend you start with the Tekonsha T-One # 118344 that connects behind your tail lights to your factory wiring. You will then use the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires...
    view full answer...
  • Recommended Trailer Hitch For A 1999 Ford Van E450
    When it comes to installing a front mount hitch on your 1999 Ford E450 Chassis I recommend The Draw-Tite Trailer Hitch Receiver # 41990-07 with 7" tall mounting brackets. You may have to modify it a tad but if your frame is wider that 44 inches there will be no problem. I do recommend having a qualified welder weld the hitch to the frame of the vehicle to make sure it is structurally sound, and use the input and the ratings of the vehicle to determine the maximum tongue weight rating...
    view full answer...
  • Will the Ultra Frame Trailer Hitch # 41906 Fit the 2005 E-350 Ford Extended Van
    Yes, the Ultra Frame Trailer Hitch, item # 41906, will fit your extended length van with no problems. All of the hitches on the page linked below will work on your 2005 E-350 Ford van also.
    view full answer...
  • High Capacity Hitch Recommendation for a 1999 Super Duty Diesel Van with Step Bumper
    The Draw Tite Hitch part # 41906 that you referenced would be an excellent hitch for your 1999 Ford Super Duty van with a step bumper. I checked with Draw Tite and it is compatible. While this is a Class IV hitch it does have impressive capacities: Maximum gross trailer weight: 10,000 lbs Maximum GTW when used with weight distribution: 12,000 lbs Maximum tongue weight: 1,000 lbs Maximum TW when used with weight distribution: 1,200 lbs I attached an install video for you to check out also. For...
    view full answer...
  • 2 Inch Trailer Hitch Receiver Options for 2013 Ford Econoline Van
    Thanks for returning to etrailer.com for your towing needs. You basically have six different options when it comes to a trailer hitch for your 2013 Ford Econoline Van. Class III with 2 inch receiver, Curt # 13055 and Draw-Tite # 75703, both with 600 lb tongue weight capacity and 6,000 lbs towing. Class IV with 2 inch receiver, Curt # 14055 and Draw-Tite # 41906, both with 1000 lb tongue weight capacity and 10,000 lbs towing. Class V with 2 inch receiver, Draw-Tite # 41945 with 1500...
    view full answer...
  • Recommendation For Hitch, Brake Controller, and Wiring For 1995 Ford E-350 Towing a Tractor
    For a 1995 Ford E-350 Van I would recommend the Draw-Tite Class IV 2 Inch Hitch, part # 41906. It has a maximum gross trailer weight capacity of 10,000 lbs and a maximum tongue weight capacity of 1,000 lbs. I am including links to the installation instructions and a video of the hitch being installed on a 2003 Ford E-350 Van. For towing, I would recommend the etrailer Ball Mount Kit, # EBMK2216. It comes with a ball mount, a 2 inch ball and a 2-5/16 inch ball, a hitch pin and clip, and...
    view full answer...


< Previous
12



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Brent H
Test Fit:
Brent H
Employee Robert C
Test Fit:
Robert C
Employee Ryan G
Test Fit:
Ryan G
Employee Mike L
Expert Research:
Mike L
Employee Sarah L
Expert Research:
Sarah L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Zack K
Video Edited:
Zack K
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew L
Video Edited:
Andrew L
Employee Andrew K
Video by:
Andrew K
Employee Joshua S
Video by:
Joshua S
Employee Kathleen M
Video by:
Kathleen M
Employee Lindsey S
Written by:
Lindsey S
Employee Laura H
Updated by:
Laura H
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Isabelle B
Updated by:
Isabelle B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


<