Features to know about

Secure Cargo in Any Weather: Locking Retractable Cover

Rain, snow, and dust can ruin tools and gear if the bed isn’t sealed tight. The RetraxONE XR Hard Tonneau Cover protects your cargo with weather stripping and foam seals on all sides, plus an overlapping top panel that blocks out water at the tailgate. The cover locks in any position along the rails using a pop-up handle and key, so you can keep part of the bed open for taller loads while shielding smaller items up front. Made from high-quality polycarbonate (Lexan) with embedded 5/8" thick aluminum I-beams every 4-3/4", it’s tough enough to handle up to 200 lbs of evenly distributed weight and stays solid from -50° to 200°F without cracking or fading.

Full Bed Access in Seconds: Smooth Retractable Operation

Bulky cargo doesn’t mean you have to remove your cover. The RetraxONE XR glides open and closed on sealed ball-bearing rollers that never need lubrication and won’t jam or bind. It rolls into a compact canister at the bulkhead, using a spiral track system to keep the panels from rubbing together. The angled bottom of the canister leaves more room in the bed, and the matte black finish keeps everything looking clean and low-profile.

Haul More Gear Overhead: T-Slot Accessory Rails

When you need to carry kayaks, bikes, or ladders, the built-in T-slots along the side rails make it easy. The integrated Trax Rail System works with most T-slot roof and ladder racks from brands like Thule, Yakima, and Rhino Rack (sold separately). You can mount your racks above the cover without affecting how it opens or closes, freeing up your bed for more cargo.

Long-Term Durability and Low Maintenance: Polycarbonate Construction

Covers that warp or fade in the sun can ruin the look of your truck and compromise protection. The RetraxONE XR is built from a single sheet of UV-treated Lexan polycarbonate—scratch resistant, impact resistant, and cooler to the touch than metal on hot days. The matte finish stays sharp through years of use, and because the design has no hinges or springs to fail, it’s maintenance-free. Two drain tubes in the canister route out any trapped water so the cover stays dry and mildew-free.

Simple, No-Drill Installation: Clamp-On Design

Setting up the RetraxONE XR doesn’t require cutting or drilling. The rails clamp directly to the bed rails and square up easily with basic tools. Once in place, the canister protects the retracted cover inside, and the flush design sits just 1" above the bed for a clean, streamlined look that’s great even with fifth-wheel setups.