Extang Trifecta 2.0 Soft Tonneau Cover - Folding - Vinyl
This item does not fit your vehicle
2005 GMC Canyon
These items fit your vehicle
2005 GMC Canyon
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
You don’t always need your whole bed open, but when you do, the Trifecta 2.0 makes it easy. The tri-fold design lets you lift the rear panel using the spring-loaded EZ-Lock clamps, giving you instant access to gear near the tailgate. Fold it forward to free up two-thirds of your bed, or remove it completely in seconds when you need the full space. It’s a simple, no-tool setup that gives you flexibility for everything from daily errands to hauling big cargo.
Some covers leave bulky rails behind when you take them off. This one doesn’t. The Trifecta 2.0’s self-contained design keeps all the clamps built into the cover itself—no loose parts, no drilling, and no permanent hardware on your truck. When you remove it, your bed looks clean and ready for work or play. The Jaw-Grip front clamps and spring-loaded EZ-Lock rear clamps hold everything tight while protecting your bed flanges from overtightening.
A cover should protect your cargo without weighing down your truck. The Trifecta 2.0 uses an aircraft-grade aluminum frame and bows finished in black powder coat for strength that resists rust. Fiberglass-reinforced nylon clamps and glass-filled nylon hinges add rigidity while keeping things light. The frame weighs about 35 lbs, so it’s sturdy but still easy to lift off when you need full bed access.
Rain or shine, this cover keeps your bed protected. The heavy-duty, leather-grain vinyl skin is permanently attached to the frame and sewn at the corners, so it stays tight and doesn’t flap or come loose in the wind. Snap-on rubber seals wrap around the perimeter to help block out water and road grime, giving you a near-watertight fit that stands up to heat, cold, dust, and storms.
Installing the Trifecta 2.0 couldn’t be easier. It comes fully assembled—just lay it behind the cab, secure the front panel with the built-in Jaw-Grip clamps, unfold it, and lock down the rear with the EZ-Lock clamps. No tools, no drilling, no alignment headaches. You can have it clamped down and driving in minutes, and when you’re done, it lifts off just as fast.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Since 1982 Extang has been perfecting the truck bed cover. For over 10 years the Trifecta's been the best selling soft folding truck bed cover in the world. Now we are proud to introduce the all new Trifecta 2.0 like the original the Trifecta 2.0 is incredibly simple to use. To close the cover, unbuckle the straps, fold the cover back, then secure it using Extang's all new EZ Lock Clamps. The tailgate can be opened and closed with the cover in any position. The Trifecta 2.0 keeps prying eyes out.
Locking the tailgate helps ensure that no one will get into your truck bed. The Trifecta 2.0 allows you to maintain ready access to your bed for easy loading and unloading. When properly secured the Trifecta 2.0 can be driven in the open position. For extra large cargo, the whole cover can be removed in seconds. Just release the T-handles on our new Jaw-Grip front clap and lift the cover off. This premium truck bed cover requires no assembly, no drilling and installation is as easy as positioning the cover on your truck and tightening the clap.
You can go from out of the box to on the road in just a few minutes. When closed the Trifecta 2.0 sits low on your truck bed. It's soft curves and sleek design create a smooth contoured, low profile appearance. The heavy duty, leather grained vinyl has been tested to withstand the harshest winter and summer conditions. Drawing on our decades of experience Extang has regarding-engineered the frame, hinges and corners of the Trifecta 2.0 to provide any greater durability and lasting value. The new multi-lipped seals are installed without adhesive and have a crisp, straight appearance that provides the best seal available for incredibly effective protection from the elements.
The frame is the strongest and best looking in the industry, made from lightweight, aircraft-grade aluminum. The frame is painted black to match the vinyl. Extang's all new EZ Lock Clamp features an exclusive spring-action handle that locks the cover to the truck when you release it. Our new Jaw-Grip front clamp grips each side of the bedrail, creating both lateral and downward force, providing a secure installation without damaging your truck. It attaches securely to the truck bed without distorting the bedrail. Extang is committed to quality and stands behind the Trifecta 2.0 with a best in class lifetime warranty.
Trifecta 2.0 premium soft folding truck bed cover is the perfect compliment to your truck. The Extang Trifecta 2.0 is the number one choice in truck bed covers.
Ratings & Reviews
Lazer S.
1/27/2026
Sorry to hear that, Craig. I can't say I have heard of one of these failing so quickly, so I am surprised. That said, the picture you sent is of a hard folding cover and what you ordered is a replacement for a soft folding cover. Is the picture of a different cover? And then also, can I ask who you contacted exactly? I checked your account and your email address, but I could not find anything sent in. Did you use a different email address by chance?
Paul L.
6/17/2020
Very happy with cover, was very easy to install. Keeps everything in bed dry and hidden. Easy to remover for larger loads. Looks great still. All in all was a fantastic experience with product!
Kyle
3/27/2020
Product worked great for the time that I had the truck it was on. The material didnt fade from the sun and it never tore or scratched if something hit it. I definitely would purchase again.
Burnie S.
12/11/2016
It is a good product. I really appreciate the ease to open the cover when you need an open truck bed
Cliff B.
6/7/2019
Still love it, Still working great.
Kate F.
4/9/2026
I am very sorry to hear that install was more difficult than anticipated. A lot of companies do have an install policy, it was on there for more than one day which is why we can't take it back. Once again, my apologies that you are not more pleased with the cover, this is not the typical feedback I get on this product.
Rdw
10/29/2021
still remains in like new condition after another year and another Maine winter.
Mike B.
8/28/2018
One of the best quality tonneau covers I have owned. Still holding up great after a year.
Jenny N.
12/9/2021
I reached out to Extang about the cover. The covers are designed to cover the inside dimensions of the bed. You will want to make sure that the cover is centered on the bed itself. Sometimes it seems like the cover should be closer to the cab window and that is not the case. You will want to make sure that it is centered. Also, the cover also is not always designed to cover the stake pockets.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ken
5/26/2026
its good, still wish the quick releases were on all 4 corners. real pain to reach in for front releases