To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Some covers stick up high and ruin the truck’s lines. This one sits just 1/2" above the bed for a clean, flush look. That low profile isn’t just about style—it’s aerodynamic, cutting wind drag and improving gas mileage by up to 10 percent. The black powder coated aluminum rails stay rust-free, keeping the finish sharp for the long haul.
The reinforced UV-blocking vinyl holds its shape through blazing summers and freezing winters. It stays flexible down to -40 °F without shrinking or stiffening. That means no sagging in the heat and no brittle spots in the cold. The material resists fading, so the matte black grain keeps its color and looks good year after year.
When you need to haul tall or bulky gear, just peel the cover back from the Velcro seals and roll it up in seconds. Two elastic straps with hooks keep it neatly stored behind the cab while you drive. Aluminum bows add structure so it rolls smoothly every time. The rails sit inside the bed rails, leaving stake pockets open for racks or tie-downs.
The XT-Dial tension adjuster at the front lets you fine-tune the fit by hand—no tools required. When you drop the cover, the trigger latch clicks closed automatically. Two slide locks on each side add security, and with the tailgate locked, your cargo stays protected. A reinforced vinyl flap along the tailgate helps keep rain, snow, and dirt out, so what’s inside stays clean and dry.
Six aircraft-grade aluminum clamps secure the rails firmly to the inside of the bed. Each clamp’s teeth grab the rail ridges for a tight hold that won’t loosen over time. Once mounted, the cover operates smoothly and the tailgate still opens and closes like normal.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, I'm Matt with etrailer. Today we're gonna be taking a close look at the Access Vanish Soft Roll-Up Tonneau Cover and all the things that stand out to me. So today we have this on a Canyon, but it's gonna work with a lot of other trucks out there. So leave a comment or snap a picture so we can see what your journey looks like. So the main things that stand out to me about this specific tonneau cover is just how well it works with other accessories and other types of racks on the back of your truck, its lightweight nature, and just how low profile it is. And we'll go into some of the other nitty gritty features about it.
So let's ask you see what this is gonna look like in action. So with this, we are gonna have a lever at the very front of it. With that lever, you also have some locks that you can move over and lock this into place. So that's the type of security it does have. It's a very simple design, but I do like it.
You will have one of these for each side. Just pull this towards you, feels pretty comfortable. You will have to pull on it a little bit though, and you can start rolling it. And this is what I mean about how it's working with other type of accessories back here. 'Cause we do have this rack, and it's taking up a majority of our bed rails.
And most tonneau covers out there are gonna sit on your bed rails and you're gonna need a lot of space. This one you really don't. It's only taken up about an eighth of an inch on those bed rails. So if you have anything like we have now, or you have a ladder rack out there that mounts to the bed rails themselves, this is gonna be probably the best option for you. And when it is fully rolled up, it really doesn't take up any space.
If I we inchesre to compare this to anything like a canister, you're typically gonna take up a little bit over a foot of your bed. And with a folding style, it's either gonna block your entire back windshield, or we're gonna take up a good decent amount of that bed space too. So that's something that does stand out about it, and you will have these hooks that'll just wrap around and make sure this isn't gonna go anywhere so it still has a nice, good look to it. Now if there's gonna be any part of this tonneau cover that takes up a decent amount of space, it's most likely gonna be these rails here. Depending on your vehicle, it might be a little bit different. But since this is gonna be supporting the tonneau cover itself, it's gonna take up a little bit of that bed space. Definitely keep that in mind if you have anything that is a little bit wider. Now also on these rails, we're gonna have this side over here. This is gonna be pretty common with any type of soft roll up tonneau cover. It's gonna our hook and loop loop over here. And that's what's gonna kind of lead to giving you that more clean look, because it can help pull this nice and tight. There's gonna be two other things to help keep this nice and tight, one of those is gonna be this knob here. You can just come over here and tighten it with your hands. So that's nice. It's not gonna require any tools. 'Cause with any type of soft roll-up tonneau cover, with time, it's gonna start to loosen up. With this, you're gonna retighten 'em down, make sure everything's nice and snug. And we are gonna have these beams too. That's gonna help keep things nice and tight. They're gonna be made of aluminum, so they're gonna be very lightweight, easy to handle. And there're gonna be a few of them. Because if there's a rain coming through, if I roll that just a little bit more, you can see a bit more right here. What this is gonna help do is help that rain run off and prevent it from just sitting on top of here, stretching out that vinyl. And speaking a little bit more about that vinyl, that's what I like about it is that it's lightweight. It's just easy to handle, especially when you're rolling up, and when you have to close it back down. And finally, when you're doing the installation of that, that's gonna be making a big difference. 'cause if you have something really heavy you're trying to put in here, it's just gonna be a long day. And speaking to that installation, this is what I like about it. It's gonna use clamps, so you won't have to do any permanent modification like drilling any holes. It's just gonna grab onto your bed rails. When it comes to other soft roll-up covers, I think another one that does compare to this is gonna be the etrailer Roll-Up Tonneau Cover. And what's nice about that is it's just gonna be a little more affordable, and it does a lot of the same things that this does. The one down, or the two downsides to the etrailer one though is if you have anything on your rails back here, it's not gonna be compatible. Like anything like this that is taking up a majority of that space, it's just not gonna fit. And this one is gonna be a little bit more low profile. So in my opinion, it looks a little bit nicer too. But of course, if you guys have any other questions, please let us know here at etrailer. Again, I'm Matt, and thanks for watching.
Ratings & Reviews
Kate F.
12/17/2025
Install looks great Kimberly! Glad to hear he loves it, and that our video was helpful to him as well!! Happy Holidays- from your friends here at etrailer =)
Kent W.
2/11/2022
Two years of use and the Vanish cover is in great condition.
Craig D.
6/10/2017
After a year, I am only more impressed! Great product!
Mike L.
8/18/2026
I'm sorry about that Brian, I'll get that taken care of!
Henry
12/29/2024
Outstanding!
Steven
4/19/2022
It’s been a year since I installed this tonneau cover and it still looks and functions great.
Richard H.
11/24/2020
It has performed great without problems !
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Nick S.
12/8/2025
That does look great installed! I a glad you were able to get it installed yourself. What truck did you end up putting it on?