Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When the haul is demanding, this wheel delivers solid strength. The Americana hub-piloted steel wheel is rated for 6,005 lbs of capacity and meets Department of Transportation standards, giving you peace of mind on long drives or heavy-duty use. Its +0.19" offset keeps the wheel positioned closer to the trailer frame for a balanced, confident ride mile after mile.
Rust and moisture don’t stand a chance against this finish. The wheel is treated with an e-coat primer and then covered in a durable gray powder coat that resists corrosion in wet or humid conditions. It keeps its look clean and holds up to tough environments season after season.
This wheel’s all-steel construction is built for consistent performance under load. The hub-piloted design centers the wheel precisely on the hub while non-chamfered bolt holes keep everything tight and secure. It’s a rugged setup that stays true when the miles start adding up.
You get an easy fit thanks to clear, standard specs. The wheel has an 8 on 6-1/2" bolt pattern, a 4.76" pilot diameter, and uses 5/8"-18 wheel bolts with flange nuts sold separately. That combination keeps installation simple and ensures a solid connection once mounted.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at the 17 1/2 inch by 6 3/4 inch hub-piloted gray solid center steel wheel with the 8 on 6 1/2 inch bolt pattern and a positive offset. Now, this wheel is a sturdy steel construction. And this is a hub-piloted wheel, which means it'll center on the hub here, not on the lugs. So when you do install this wheel on your hub, this hole is gonna slide right onto the hub, it's gonna have the exact diameter. The pilot hole diameter on this is 4.76 inches.
And because it's hub-piloted, the bolt holes are non-chamfered, 'cause it doesn't have to center using the lugs, it'll use the pilot hole. So it does require the use of flange nuts for installation. Those we do sell separately on our website. They do require a size of 5/8 inch by 18 size flange nuts, and they go by a part number of 95188. And just to show you what we're talking about, I happen to pull one of those.
And here's what the flange nut looks like. So basically, you can see it has a flange on it. When you put this up on the hub, put this onto the stud, and you can tighten it down to hold the wheel in place. Now, we mentioned this wheel does have a positive offset. And when I mentioned the offset, offset is always measured from the center line of the wheel, so in other words, into the mounting surface.
So if the mounting surface is lined up exactly on the center, that's zero, that's a starting point. If this mounting surface would move to the front of the wheel, that's gonna be positive offset, if it moves to the back of the wheel, that's negative offset. And the positive offset on this wheel is 0.19 inches, so it's moving that much, 0.19 inches. So what that's doing is it's moving this wheel closer to the trailer frame. Now, this does give excellent corrosion resistance, 'cause it uses a gray powder coat finish over an e-coat primer.
And the wheel is a high quality wheel, meets the DOT, Department of Transportation specifications. Few measurements on this, we're gonna measure the diameter. The diameter will always be measured inside to inside. So if we take our tape measure and if we go inside to inside, there's your 17 1/2 inch diameter. If we measure the width, same way, it's inside to inside or bead seat to bead seat. So there's your 6 3/4 inches wide. And the bolt pattern on this wheel is 8 on 6 1/2 inch bolt pattern. And if you wanna measure the bolt pattern on a wheel that's an even number of lugs like this one's an eight lug, it's pretty easy, 'cause if you look at the lug holes, you can see they're directly across from each other. So all you have to do is pick any hole, let's say this one, and then measure from the center of this hole directly across to the center of the hole right across from it. So on this wheel, it'll measure 6 1/2 inches, so it's an 8 on 6 1/2 inch bolt pattern. Weight capacity on this wheel is 6,005 pounds. But that's gonna do it for the review on the 17 1/2 inch by 6 3/4 inch hub-piloted gray solid center steel wheel with the 8 on 6 1/2 inch bolt pattern.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
Ratings & Reviews
As ordered,
Was a great upgrade to the prior sized rims.
came in timley and worked as expected
Perfect rims
Excellent rim!
Thank you thought it wouldn't arrive that fast I'll be using you company for my trailer needs
This was great service Justin did exactly what he said and we received our wheel super fast. Thank you Justin for getting this out as fast as you did.
Perfect fit and affordable
I would purchase again from them very professional and prompt
Fast shipping and item received as desc ribed.
IT WAS FAST
Great fit and finish
I bought this wheel to have a spare for my H&H 16K deckover gooseneck. The offset was just slightly less than the factory wheels, but still fits great and has the same finish.
Quick shipped great fit
This rim is great. What I was really happy about, is that I accidentally forgot to add the express shipping and when I called I got right through to a real human who just did a quick charge for the extra shipping and got my product to me on the exact day they said! It was such a fast and easy process to fix my mistake and I really appreciated them doing it so easily! It kept our business running on time! Thank you!!!
Got exactly what I ordered and it showed up right on time! Ordered one from the company that made my trailer and they sent totally wrong parts first, then once a rim did show up, it was the wrong rim. I should have ordered from etrailer from the start! The one I got from these guys was an exact match to my other four and less expensive than anywhere else. It's a good thing I got one as I had a blow out the next day and very early in my trip. I couldn't have gone on vacation without them.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gwendolyn Y.
7/15/2025
I'm glad that the rim arrived in time for your trip! Even though the trip started off a little rocky, how did the trip go?