The spring seat is a necessary component of your trailer's suspension system. When mounted with 1-3/4" or 2" wide leaf springs, it adds extra support and provides proper positioning for the axle.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there. I'm Michael with etrailer.com. Today we're gonna take a real quick look at this spring seat. This spring seat is gonna be a necessary component for your trailer's suspension system. It will weld onto a round four inch diameter axle and those are typically your 9,000 pound capacity axles. And this will work with a one and a three quarter inch or two inch wide springs.
You can see that whole cutout that we have there on the flat side that's going to surround the raised knob on the leaf springs to prevent turning or shifting. That's gonna provide the extra support and positioning that the trailer axle needs. You are gonna need two of these spring seats for each axle, one for each side. So make sure that you have sufficient amounts for the number of axles that you're gonna be putting on. That completes our look for today.
Again, I'm Michael with etrailer.com. Thanks for watching.
Do you have a question about this Trailer Suspension Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.