Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
9" Wide x 32" long x 15" tall. This sturdy, rounded fender has a flat back to mount flush with your enclosed trailer. Ribbed, 16-gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello everybody. This is Jeff at etrailer.com. Today we're going to take a look at this etrailer single-axle steel trailer fender with the ribs for 14" to 15" wheels. It is for a quantity of one fender. Now this is a nice rounded fender that'll cover one tire on your single axle trailer. This fender will act as a splash guard, helps keep any road debris from hitting other vehicles, and also helps protect your trailer's cargo.I wanted to show you the outer edge on this.
Right here you can see has a nice 1" curve radius lip to it to give it a real nice appearance, and on the inside lip, it has a 90-degree lip on the inner edge and that allows you to mount it flush to the enclosed trailer. This fender is a sturdy ribbed 16-gauge cold rolled steel construction. This can be primed and then painted to provide even more resistance to corrosion and to match your trailer's paint finish. Now, the ribs we mentioned on this, you can see this one has three ribs. Those are actually stiffener ribs.
They are designed to help eliminate flexing of the fender.Now, this is a weld-on or a bolt-on installation. It is not pre-drilled, and the mounting brackets for bolt-on installation are sold separately. This fender is made in the USA. Few specs on this. This is for a quantity of one fender.
Again, the application is a single-axle trailer with 14" to 15" diameter wheels. The weight on this fender is only about nine pounds, and the last thing I want to do is just give you some dimensions on this, so I'm just going to flip it over and we're going to measure the length, the width, and then the overall height. So the length from one edge to the other is going to be right at 32" long. The width on it. It's going to be right at 9" wide, and the overall height, we just flip this back over.
From the bottom, very top is right at 15" tall.That should do it for the review on this etrailer single-axle steel trailer fender with the ribs for 14" to 15" wheels for a quantity of one.
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
Ratings & Reviews
Fenders are exactly what I was looking for!
As described, videos are extremely helpful when choosing the the correct parts.
Impressive company and staff! Thank You
Good quality, worked well on our homemade pick-up bed
This is an exact replacement for another product that I previously purchased with a back plate for my father's homemade boat trailer. I lost the fender on a long haul of his boat, but not the back plate. I was able to bolt on the original back plate. I am completely satisfied with this product.
Received the metal products today. Very nice quality of craftsmanship
It is exactly as described except for the ends which both have a slight bow in them. I am not using this for a trailer and need the shape and size as close to perfect as possible. Hopefully my straightening skills will be up to par. Every other part of this transaction was excellent.
Two new fenders worked out fine. I had replaced the original new fenders on my trailer that I didn't like. I made and welded on my own inner fender out of 16ga material and 11ga floor plate for steps/gussets.
The fender worked well for my custom ap plication
Worked great. snug but fits 275/75/r18 (~33in) tires so I can match my tow vehicle. overlanding trailer build. Originally done in exterior black semi gloss. After chipping following 3k mi swapped coating to primer + two coats of truck bed liner which has adhered really well. Durable. When well supported they can work as a step for me. I did mod them to bring them down in width to form better for my application (would have been too wide, extending 3in past the tire). Responded well to being trimmed. Applied typical rubber-coated 1/8in edge trim to cut side where that met the trailer wall. While not precisely the right item for my unique/custom application, its durability and workability to fit my project was great.
Fantastic price for what you get! I've recommended them to so many people in my circles, custom truck circles. I used them for my front inner fenders of my bagged Suburban. The work great. The dimensions were what I was looking for, the thickness of the metal is spot on, and the ribs add a dimension to the look that I really like. I modified one of them and I'm not a metal worker so please forgive the passenger side in the pic. I'd definitely buy these again, which I may because I'm bagging my 2004 Ram right now.
Heavy Duty Easy to Install
Very sturdy and well made.
Everything is holding up great. Good quality product.
Perfect as described, Great price and reasonable shipping cost.
I was impressed with how soon you got the fender to me. It looks really good. It arrived this afternoon, so I haven't got it mounted, but I don't anticipate any problems.
I welded and bolted it with mounting brackets on my tow dolly. I painted it with a primer and then a glossy black. Added tail lights and front markers. Good solid fender
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike
11/10/2022
It is as good as the original fender and still looks as good as it did the day I put it on the trailer.