Give your trailer a classic look and reliable protection. This rounded teardrop fender shields both tires on one side, keeping rocks, water, and road grime away from your cargo.
When replacing your trailer fender, do your best to match the dimensions of the new fender to your old one. If your fender was damaged in a blowout, you can use the opposite fender to get the right measurements. Before you get started, always chock your wheels for safety. If you are installing a bolt-on fender, use your existing mounting hardware if possible, but be prepared to replace any bolts or screws that are stripped or rusted. If you need to remove an old, welded-on fender, you can carefully chisel it off yourself or take your trailer to a weld shop for professional removal. Do not forget to prime and paint the new fender to prevent rust and match your trailer's finish. Before drilling any holes, position the fender exactly where you want it and center it over your wheel well, marking your spots carefully. Measure twice and drill once. Finally, wait to fully tighten down the mounting hardware until you are sure the fender is mounted just right.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer.com. Let's take a real quick look at these Tandem Axle Teardrop Fenders for your enclosed trailers. Now as you can see, I have one fender on my table, but you will get two. I just had room here on my table for one. But these rounded teardrop fenders are gonna cover two tires on each side of your tandem Axle Trailer.
Obviously, they're gonna do a great job of blocking road debris from hitting other vehicles and helping to protect your cargo. These are designed for your Tandem Axle Trailers with 15 to 16 inch diameter wheels. And let me give you some measurements here of this fender. So looking at the overall length from end to end, we're sitting right at 72 inches long, the overall width, about 10 inches and then the overall height, about 20 and a half inches tall. Each fender's gonna weigh about 11 pounds.
This sleek tier drop design is gonna give you a clean, stylish look and these do come ready to be primed and painted for corrosion protection and, of course, to match the finish of your trailer as well. They do kind of have a oily film on the fender, so you do wanna clean that off before you start priming and painting just to make sure they look great on your trailer and to protect them from corrosion and rust and things like that. So this is going to be either a weld-on or a bolt-on installation. And, of course, you probably know you don't want to use the backing plate to mount the fender to your trailer. And this is going to require drilling and the purchase or fabrication of mounting brackets.
None of that is gonna be included with this. You're simply going to be getting the fenders and you do want to do your best to match the dimensions of the new fender to your old one. So if only one fender was damaged, it's a good idea to use the opposite fender, the one that wasn't damaged to get the proper dimensions that you need. So, again, you will get two and if you do pick these up, we would love to hear back from you regarding how the installation went and how they're working out for you and we would also like to see pictures of these on your setup as well, especially after you get them painted to match the finish of your trailer. So you can leave a comment or review on this product page.
If you leave a review, you can actually add pictures to that review. But if you do have any other additional questions, don't hesitate to reach back out to us. We wanna be sure that you're getting exactly what you want and need. Well, I think that's gonna wrap up our quick look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Fits well
Great product, great service, shipped and received quickly
great quality fender, perfect fit.
left off a star due to no back plate is offered with this size, I had to cut out my own back plates.
So far they look great, I still needs to install. Great price with shipping. I searched high and low and these guys have what I need with a great price point.
Thanks, Scott
Do you have a question about this Trailer Fender?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.