To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
You don’t have to remove this cover to haul taller gear or oversized loads. The TruXedo Lo Pro rolls up in seconds and self-stores neatly behind the cab using built-in straps. The design mounts inside the bed rails, keeping stake pockets open for racks or tiedowns. When rolled out, it sits less than 1" above the bed for a clean, low-profile look that reduces tailgate drag and can help improve gas mileage by up to 10 percent.
Loose or sagging vinyl is a common issue, especially when the weather changes. The Lo Pro solves that with a spring-loaded, automatic tension control that constantly adjusts the cover to stay wrinkle-free in all temperatures. The “floating hook” Velcro strips slide along the rails as the fabric expands or contracts, keeping the surface tight and extending the life of both the cover and Velcro.
Getting to your cargo is simple. The 1-finger trigger latch at the tailgate releases the rear header so you can roll the cover open in seconds. When closed, the header latches against the tailgate, and with the tailgate locked, the cover can’t be opened—adding a layer of security without any complicated mechanisms.
Rain, dust, and debris meet their match thanks to rubber weather seals on all four sides, including the corners. The industrial-strength, leather-grain vinyl fabric doesn’t shrink in cold climates and keeps your cargo area shielded from the elements. The tight, overlapping seals and strong Velcro fastening create a near-watertight barrier that holds up through all kinds of weather.
Installing the Lo Pro takes about 20 minutes with just a socket and ratchet. Three clamps per side secure the rails firmly to the inside of the bed without drilling. The snap-in header guide simplifies alignment, and all parts come pre-assembled so you can get a snug, level fit on the first try. Once installed, the aerodynamic rails and smooth vinyl top look factory-finished and stay that way for years.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to be taking a look at the Truxedo Lo Pro QT Soft Roll-up Tonneau Cover. It's available to fit your specific truck, see etrailer.com. This Truxedo tonneau cover is a great way to protect your truck bed and anything inside of it. It's a soft leather grain vinyl that conveniently rolls up for full truck bed access. When using the included attached straps you can even drive with it open.One great feature is, unlike folding tonneau covers, you don't have to worry about the roll-up design obstructing your rear view with the tonneau cover open. When comparing this to a tonneau cover that rolls up within a canister, with this style we don't have to worry about the canister taking up space inside of our truck bed.
With it rolled up you can see how the tonneau rails are mounted. They're a simple clamp on design. Four clamps per side and they mount to the inside of our truck bed rails. That way we still have access to our stake pockets for stake pocket accessories. They only sit about three inches inside of our truck bed and about an inch above our truck bed.Here you can see the integrated tension control.
Both rails have them. This is going to allow you to adjust the tension in our tonneau cover that way it remains tight over time. The tonneau roll itself, has built in bows. This is a step up compared to some tonneau covers. Not only is it going to help it remain tight over time, it's going to prevent water from pooling on top.The automatic latch secures the tonneau cover.
It's also easy to operate when we want to open it. Simply pull it towards you. When used with a locking tailgate, your bed is secure. The large hook and loop fasteners on each side of the tonneau cover, are going to help keep it tight and help keep the elements out. All in all this tonneau cover's going to be a great option for your truck bed.
It's going to add a sleek and stylish look. It installs like most tonneau covers, with a clamp on design. There's no drilling or cutting required.One of our customers, Glenn says, "A year later, my cover is still practically new looking. I've had zero issues with wear, stretching, velcro separation. Instillation was very easy, by myself and was a perfect fit. Money well spent." One of our other customers, John A. says, "Great product, I'm very satisfied with the tonneau cover. Cleans up easily, rolls up very easy and fastens down really good. I will purchase another one if and when the time comes. Feel confident making this purchase, I know you will be satisfied."Compared to the Access Loredo roll-up soft tonneau cover, there are only two real differences. The Truxedo uses more clamps so it may be more difficult to install. The Access Loredo uses a draw string design that operates a latch on each side for opening. While the Truxedo has a latch just on the driver's side. They're both a roll up to the cab design that strap in place so we can drive with them open and that's going to complete our look. The Truxedo Low Pro QT Soft Roll-up Tonneau Cover.
Ratings & Reviews
Easy to install, easy to use, and looks great.
Read the instructions a couple times before installing. Easy peasy, and it looks great.
I replaced a back flip tri fold hard cover with this I pull a 5th wheel with a short box and a turning point pin box. Each time I hooked up the 5er, I had to remove the back flip cover. Pain in the ear. With the soft roll up I can just roll the cover to open and still have full turn radius.
The product looks great. Just like my old one that lasted 20 years. The item is in good condition despite the rough handling by UPS. End of box was open and driver just threw it on the ground just inside the fence next to road. Must not have been the regular driver. Last one was delivered to front porch in good condition
Cover was great, prompt shipping and great communication
Got it installed by myself. Took s little longer to get everything adjusted but it fits perfectly.
The cover took longer than expected top be delivered, but once it got here, it was an easy installation. The only glitch was that the instructions could have been better illustrated in regards to the placement of the foam trim for the main cross bar that rests on top of the front bed wall.
Excited for this but the threading seems to be coming apart. I am not sure it will hold. But it is on and the Velcro holds good. When I bought my last one 12 years ago it seemed like it was built to last. I hope this one last as long. Price was great.
The installation was easy. I love the release system on it as well as the tensioner. After a year it is still holding up well to the elements and looking good. Being made in the USA is a plus!
I’ve had a low pro previously on my truck for 8 years which I think was a better build than this version that I received on 3/29/24 this version the end caps on the rails are a foam insert. The older version had a rubber insert only time will tell how long these peal and stick glued foam pieces will last. Also some of the foam peace’s came glued together which was of no use.
I have ordered from Etrailer several times over the last few years and I have always received excellent product and service. This last order that I received was a replacement of a wrong order that I made. Etrailer made it pretty easy to rectify my mistake and get me the right tonneau cover.
This cover has worked well for our truck. I would highly recommend it!
Not my first Truxedo. Every truck I have gets one.
Very durable. Holds up well in MN winters. Adjustability is there. I work in construction now, and I've had some of these take some pretty good hits, but have never failed.
Used to work for a dealership as the Accessories manager, and I got to see them all. Truxedo was all I ever recommended, and why I personally have them
They did everything they could to get the product to me and ended up shipping it from the manufacture, great quality not to bad to install, only issue was the cover was rolled backwards on the front rail which made it a little confusing at first trying to install, but it was pretty easy to figure out.
Great product quality and exactly as described. Shipping was fast, and the measurements were accurate. Customer service was also very helpful. Overall, a great experience.
This cover stays nice and tight with heavy duty Velcro
It seems to be keeping its color and condition well
Seems fairly secure considering it’s just a soft cover
This fits my generation 1 Honda Ridgeline perfectly! For the money, I give it five stars because it functions very nicely and keeps most of the water out, lol. Adds to security and storage so people don't walk along and just grab something out of the back of my truck. Thanks again for your help finding the right part
It fits the situation we have with our new 5th wheel which has a Curt pin box with the shock and spring on it. Rolls up nice and looks great when it's closed.
Delivery in a timely manner. I installed it same day, quick, easy, and looks great!
Wish step by step spelled out instructions were included. Good fit and finish.
Just installed the cover yesterday. Looks great. Installation went very well. Heavy rain last night and the truck bed was dry. The bed storage door does open, but not completely since it hits the bed cover rails. It opens enough to get most items in - everything that I need. I would recommend this cover.
Great cover. It is the perfect height above the bed rails to allow my Craftsman storage box to slide into the bed.
Looks great! Easy installation too. I also like how the cover stows when rolled up to the front of the truck bed. The small sized roll doesn't block my view when hooking up my 5th wheel trailer. Overall, I've been very happy with this cover.
Looks good. The rubber seal at the tailgate on the passenger side is loose and floppy but looks OK cosmetically. Was fairly easy to install. It helped to watch online utube videos. If it holds up over time and stays as nice it is I would rate it 5 stars but it's too early to tell.
Im only slightly handy and i was able to install the cover without issue on my 2003 ford ranger. One year later and its still working great. I love it.
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.