To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
With the Pro X15 you don’t lose bed space when you need to haul something tall or bulky. The soft cover rolls up easily and secures behind the cab with built-in safety straps, giving you full access to the bed without removing the cover. Even rolled up, it stays low enough that it doesn’t block the rear window. Because it mounts inside the bed rails, you still have full use of stake pockets, tie-down anchors, and other accessories.
Rain, dust, and sun are no match for the Pro X15. The woven polyester fabric with vinyl backing forms a durable, matte-black surface that resists UV rays, fading, and extreme temperatures. Automotive-grade seals at the cab and tailgate help keep out dirt and water so your cargo stays dry. The surface sheds grime easily, staying cleaner longer and ready for daily use through every season.
The cover sits just 1/2 inch above the bed rails for a flush look that blends smoothly with the truck’s lines. The self-leveling side rails make installation simple and even, while the angled 15-degree rail design reduces wind drag to help improve gas mileage. Automatic tension control keeps the surface tight in heat or cold so it always looks neat and never sags.
Opening and closing this cover takes only one person. A single latch at the tailgate releases the cover from either side, while industrial-grade hook-and-loop fasteners along the rails hold it securely with no snaps or zippers to fuss with. When the tailgate is locked, the cover can’t be opened—adding an extra layer of security for gear stored in the bed.
The Pro X15 goes on without drilling or special tools. The lightweight aluminum side rails clamp directly to the bed rails, keeping them corrosion resistant and properly aligned thanks to the self-leveling design. Hook-and-loop strips hold the cover in place as you unroll it, then latch at the tailgate for a tight seal that’s ready to go in minutes.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're gonna be taking a look at the Truxedo line of the Pro-X 15 soft Tonneau cover. Now because these covers are custom fit, it's very important that you use the fit guide, so you can figure out the exact one for your application.So regardless if you have a small truck like this Colorado all the way out to a big F-350 with an eight foot bed, we're gonna have a fit that's gonna work out really well for you.Now the pro-X 15 is gonna be a really good general use style Tonneau cover. It has the soft texture to it, really nice fabric material. The feel on it is good and solid. And unlike other soft Tonneau covers, we don't have the arches that we're used to. As you can see, it has a really low profile look to it like the Tonneau covers that we find that are more expensive generally, the rails are gonna sit inside the side of our truck bed.
That way, we don't have them sticking up and over. That's gonna give us access like you can see there on that corner to that stake pocket. And really, it's a pretty affordable cover.Now the cover itself offers us a lot of protection. One against theft, but also against the elements. Keeping out dust, dirt and water.
Like any Tonneau cover though, these are a water-resistant kind of a situation. There's always gonna be a little seam somewhere, water getting in from somewhere, it's just what we see even with the most expensive Tonneau covers that we carry. But overall, it'll be a really good solution for protecting items from the elements.Now for the theft portion, with any locking tailgate, once you've secured this down, you're not gonna have to worry about anybody getting to the release. It's an internal release, there's no external release. But then, we can simply open our tailgate up there, single-handed operation, so we can release it on the driver's side, roll that out to tilt up and we can just begin to roll it forward.We've got a spring loaded latch right here on our backside.
This constantly applies tension to our cover, so as our seasons change, that'll expand and contract a little bit to keep everything nice and tight.Now comparing this releasing mechanism to other Tonneau covers that are available, I will say that having the handle just on the driver's side is a slight drawback for me. Other covers will have them on both sides where you can easily release it from both sides. I don't think it's a huge problem, most trucks aren't that wide, but just definitely something to keep in mind.Now as we close our cover, we wanna ensure that our tailgate seal comes down and lays right on top of our gate force giving us additional protection. So we'll wanna have our gate closed, we wanna get our cover in position and then just press down 'til we hear the click.The overall feel of the cover is gonna be a lot like a convertible top or a Jeep top. It has a good textured feel to it.
It's a polyester upper material here, it gives us a nice matte look. Then on the bottom side, you'll see as we roll it up, fully vinyl coated so you're not gonna have to worry about any moisture getting through to the inside through our cover.As we continue to roll it up, you'll notice it only takes one person, and we have our cross-supports here. Unlike the old cross-supports where you had to stick it in and get the other side in, usually you just broke them. These are automatic. As we roll it up, they're gonna roll up with our cover. As we unroll our cover, they just automatically go in, rest right down on our rail, giving us the support that we need.Another nice thing I like about the style of this cover is that with it fully rolled up, we've got full access to our bed. We can load up those larger items, but we also have a full view out of our back window. A lot of times with other covers, they're gonna come up and block either a portion or all of that back window, leaving you without your rear view mirror. In this case, it still remains fully functional for us.Now one thing you will wanna keep in mind is that as we add these rails to the inside here, we're gonna lose a little bit of our bed width. From the actual side of the bed, the portion right here but a little bit further in to the outside here, we've got about three inches.Something else I really like and I think is an improvement over older style covers like this is that the hook and loop material that they're using here, really seems very superior. It's very wide, but it also feels really heavy duty. So as we bring our attention side to side, we can feel it get a good hold, no doubt that it's grabbing a hold really well. And we just run down all the way, it gives us a nice tight seal here on the outside.Now Tonneau covers like this can help to improve the ride quality in your truck too. Basically as that wind's coming over the cab or if we get into crosswinds, they don't get in the box of the bed and cause that shifting side to side. So it's gonna smooth out everything if you get in those situations, and it can save you a little bit of money at the gas pump.Now as far as the installation process goes, it's gonna be really straight-forward. You're gonna need one tool, either a half-inch wrench or socket. That's really straight-forward. And then depending on your bed size, this one's a shorter bed, so we've got three clamps. One positioned here, here and then one closer to the back. On a long bed application, you'll have two here in the middle, so you'll just wanna split that difference.But overall, nice, quick and easy to get installed. And all of the adjustments you're gonna need to make as far as up here for our initial adjustment and our tension adjustment, can really be done by hand.Now my overall first impression of this cover, comparing it to other covers in its category, is that it's really solid. I think they've put a lot of nice features in it. I was reading through a lot of reviews online and trying to see what people have used them for a year or so are saying about them, and everybody seems to have good, positive things to say about it. Lasts a long time, it stays nice and tight, so I don't think you're gonna run into any big issues with this.And that's gonna complete our look at the Truxedo Pro-X 15 soft Tonneau covers.
Ratings & Reviews
Install went smooth. The instructions could have been a little clearer on attaching the cover to the front of bed. So far so good.
The cover fit well, but there were some issues getting it latched with the tailgate closed. It seemed the frame that is clamped to the box, would flex down and not latch. This was resolved by placing a small piece of 1X2 wood block in the underside of the frame above the top of the folded handle mounted to the box. This preventedthe aluminum from flexing at the latch, and it works well now. The fabric of this cover is very nice, and abbears to be an upgrade from other covers.
The polyester cover is the real heavy duty fabric - they must prefit these because it worked perfectly- no adjustment was needed. The same high quality Truxedo that I bought for my 2005 Tundra 20 years ago- they did not cheaper or compromise in any way, it's really well made. E-Trailer customer support goes above and beyond to ensure ki ordered the correct one, then actually called me a week later to inform me it had shipped early from Truxedo. High fives all around!
The cover in general is great.. However, I am having a problem with the cover being too tight against the tailgate lid. Why ????? Problem: When I get the cover in place with the clip on the left down and snapped in place, I can not open the tailgate of my Ford F-150 to open either with the key fob or manually by pushing the tailgate button on the gate itself. Every time I try, the gate unlocks (click) and then locks again within less than a second. I have to reach under the Velcro side and release the clip to allow the very end of the cover to relax and allow the tailgate to open. I believe there may be too much pressure down on the tailgate lid across the back to allow the tailgate to move automatically. Is there any dealer near me that could look at the installation and tell me what's wrong I love the cover, but use it in a mostly loose position or rolled up. I would appreciate any help you may be able to offer. Thanks
Looks great but doesn't roll up and roll out has well as other covers I have had. Despite multiple attempts to adjust for squareness it is always off.
Nice top install was a breeze
Thank you All for making the effort to ship to Canada,Eh !.
The Tuxedo Pro 15 fit our 2021,3500
Silverado perfectly.
Looks great works great easy install
This is a great cover. It works perfectly with my Adarac bed rack. Installs easily and is made with premium materials. Functions great and stays surprisingly clean being that it is matte black. Haven't noticed any fading so far.
This is the 3rd vehicle I have installed tuxedo covers on. It is a quality product, with easy installation. It is great for keeping contents of truck bed dry and secure. The low profile really makes the truck look amazing . Well worth the price.
Very happy with this cover. Seals out water very well. Easy to use. Open tailgate, flip the lever to raise the seal. Put in or take out cargo. Close tailgate. Push cover down to re-lock. Easy Peasy. Looks same now as when new. Stays tight in hot weather. Not too tight in cold weather.
Great as usual, can’t believe how fast we received it, thanks again.
Fits great, looks great. Keeps the rain and snow out.
Absolutely love it, never thought I would switch from my previous cover mfg until I tried this one. Works great in all kinds of weather and no issues of any kind. Would recommend this cover to anyone looking to purchase one.
Fits perfect and the Velcro is solid.
I have bought nothing but TruXedo tonneau covers because they are the best! And this new Pro X15 is amazing. It's been on my truck for over a year now and made it through the harsh Michigan winter/snow with ease. I would buy with 100% confidence!
After I completed my order of a replacement tonneau cover fabric, etrailer did an amazing job making sure my order was going to be exactly what I was needed. I received a couple different emails requesting additional information from me. I was also very well informed of my package AT ALL TIMES!!! I could look every day and see where it was and when it was going to show up. The cover fits PERFECT!!! Couldn’t be happier with my Truxedo X-15 replacement cover. Thanks etrailer!!!
I absolutely love it! Keeps my 5th wheel hitch out of the weather and looks great doing it!
The tonneau that came was the proper one. Half the stuff I have ordered from other vendors has been the wrong part. Product was prompt and in good condition. I have never been let down by ETRAILER, Thank you.
Easy install and great product. Second vehicle with same cover
Great cover. Super easy to install on my new Ridgeline. High quality, and I love the matte polyester topside of the cover. Looks and works great!
Easy ordering and fast shipping. Well made product. Easy installation, just read instructions and watch videos.
I purchased this Tonneau cover for my new truck and couldn’t be happier. Being able to roll it up all the way to the cab is what makes it perfect to have full access to your bed. I couldn’t recommend it more.
The cover seems good. But the latch does not work with Jeep Gladiator. I have ordered the low profile latch. Hopefully it will fit in the tight space.
I love the look , but the fit for this 2026 ram isn’t the best at the tail gate , and I think there should have been a little more efforts put into the seal designs on the ends .
I have this brand on 2 of my older GM trucks and I love them . I’m not totally dissatisfied , I just think there could have been more design out into this cover for the money it costed , and to keep things sealed .
Because I’m pretty sure when it rains , there will be some water get in at the tailgate seal area and possibly the front corners of bed .
But the material quality looks and feels to be really nice . Just the fit design needed more attention .
If I were to spend the money again , and knowing what I know now ,I would be looking hard into other brands to see how their designs are .
This is why I give this cover a 3 star rating , because it has its pros and cons . I love this brand but different model on my older trucks , and that’s the reason I bought this cover .
And I would have like to have had a little more lip to go over my bed sides , this part of the cover also is a little shy on design as well .
It does look good on the truck , and it doesn’t stick up , it looks pretty sleek as far as that goes .
But this is my take on the overall
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.