To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Some covers get in the way when it’s time to haul bigger gear. The Leer Hard Tonneau Cover folds up in four sections so you can open three-quarters of the bed or fold it completely against the cab for full access. Prop rods hold it steady and keep it from touching the cab, while buckles secure it when folded flat. Whether you’re carrying tools, plywood, or camping gear, you can open as much or as little of the bed as you need without removing the cover.
Rain, dust, and road spray stay out thanks to tight weather seals that don’t rely on drain tubes. The cover latches shut whether the tailgate is open or closed, and when combined with a locking tailgate, your cargo stays secure. That means you can leave your gear in the bed with confidence through rainstorms or at job sites without worrying about leaks or prying hands.
The panels are made from fiberglass-reinforced plastic that’s strong, dent-resistant, and designed for long-term durability. It can support up to 450 lbs of evenly distributed weight, so you can set gear or tools on top without stressing the panels. The textured matte black finish looks clean and resists wear, keeping its shape and color through years of use.
This cover sits only about ½ inch above the bed rails, giving a sleek appearance that blends with the truck’s lines instead of bulging above them. Because it clamps inside the bed rails, installation is simple—no drilling or special tools required—and you still have full use of stake pockets or tie-down points. The flush-fit design keeps wind noise low and gives a smooth, finished look from every angle.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
Ratings & Reviews
Fast shipping !! Excellent website !!
My Leer hard Tonneau cover fits perfectly!!
I have always thought highly of Leer products because they were made in USA but to my surprise and disappointment it was made in China. My fault I will research better in the future.
Great product but the installation instructions were not much help. Utube videos helped
This is the 2nd Leer Tonneau cover I have owned and am satisfied with the product. Like any product there are things that will fail like the plastic clips that hold the support arms in place. With the Florida sun and heat they breakdown over time and the exterior finish will start to fade in a couple of years. I would suggest cleaning it often with a UV protector cleaner like the marine grade 303. WIth this said, I would still recommend this product.
Easy to install, has really great features! Arrived in mint condition, fast shipping.
Just installed this tonneau cover. Quick shipping from etrailer. Ordered Tuesday evening and arrived Thursday. The etrailer installation video was excellent - very helpful. The Leer instructions and installation video were lacking - in fact the video was from an earlier version of this cover. That’s the reason for just 4 stars. One thing I did was before tightening down the cover itself is I unfolded the cover and checked to make sure the fore/aft position was good. In particular I was wanting to be sure the cover’s tailgate seal was firm against the tailgate to insure no water / snow entry. Leakage past the tailgate had been mentioned in a couple of reviews so I was wanting to insure that seal was going to do its job.
Overall the cover looks great. I like the pinch release for releasing the cover latches I know folks with covers that just have the cable you pull that were broken into by sliding a hook rod in and pulling the cable. I also like that there are latches on 3 of the 4 sections - makes it harder to pry up the cover. Installation was easy thanks to the etrailer video. I’ll update this review after I see how well this cover performs over time.
Chose this cover for its 4 panels (not 3). Does not cover the cab light bar/camera when vertical. Plenty of room with bikes hooked over tailgate when horizontal. Solidly made. Have not driven it through the car wash to check waterproofness.
Just installed this a few days ago on my 2026 Sierra. So far I am happy. It seems well made and looks nice. I like the quad fold and the fact that you can fold it completely up and out of the bed if you need to. We had very hard rain the day after I installed it and a very small amount of water got in. But not very much at all given the storm we had. I am going to continue to try to add more sealer (included with the cover) at the front corners to see if I can improve the "water proofing" even more. My only complaint at all would be the instructions. The paper instructions that come with the cover are a joke. The video on E-trailer was much more helpful. Though it was a different year truck and different clamps and some small things about the cover had changed, so the video was not perfect. But a big help. The paper instructions that come with it are not helpful at all. But once I figured it all out it went on fine and looks great!
Awesome product! I easily installed it by myself in about an hour. As waterproof as can be given the gaps of the tailgate. Very quiet at highway speeds.
Fit perfectly on my 2024 Cherolet 2500 HD.
No water gets in the bed. Heavy enough thst I can stack things on top of it if necessary. I highly recommend this cover.
Perfect fit on 2025 Nissan Frontier Pro-4x Crew Cab short bed. Installation should have been easy, and is probably a breeze after you’ve successfully done it once, but ended up being a several hour process due ENTIRELY to the atrociously unclear “official” LEER instructions. And this was after watching several YouTube installation videos. The video from LEER is hopelessly out of date and shows different clamps. There is NO front bulkhead seal and does not appear to need one. The instructions omit any no mention of the roll of sticky black putty, which is apparently to seal any small gaps remaining at left and right front corners of bed after completing installation. I had to use a little on each of the front corners (you can see gaps from inside the bed based on light penetrating and putty those up). Alignment of rails was spot-on. Clamps come with METAL SHIMS already pre-installed. MADE IN CHINA. Excellent fast shipping from eTrailer (ordered Tuesday evening, received Friday morning).
Superb quality and the quad-fold design on 2026 Chevy Silverado truck does not cover the rear facing camera when folded against the cab. Full-bed access on a short bed truck is critical, and this LEER design hits all the cylinders!
Fantastic cover. I bought another name brand for my previous truck. It was a high end name brand and worked really well but this Leer is better. I like the way you can still see the third row brake light (it’s four panel vise three so it’s shorter when folded all the way up), I also think this one is more water tight compared to my last one. I also like the unlatching mechanism better. I honestly believe it’s the front running for a hard cover short of the very very high end aluminum ones that sit above the rim of the bed. But this one will hold 450 lbs and sits flush. Won’t disappoint.
This is my second Leer tonneau cover so I was familiar with the installation process. The instructions are adequate but less than ideal. This one fit better and latches more securely than my the previous one. A few extra minutes spent getting it square both left and right and front to back is worth the effort. This cover looks great and functions well. My installation time working alone and taking my time was about 2.5 hours.
After the delivery of the leer tonneau cover, I was able to install without any issues. After the installation however, I noticed there was a rattling sound vibrating within the panels of the cover. I will be investigating further to identify what the noise is and of course contacting etrailer.
Install was easy fits great.
Installation instructions could be a little better also the latches are noisy when on rough roads.
Let's start with etrailer personnel, who once again made the purchasing and shipment process another EXCELLENT experience. First Class! The Leer Hard Tonneau Cover-Quad Fold appears to fit well, is sturdy and secure. My sense is it will meet and / or exceed my expectations. After installation, I did a "day light" inspection and noticed a small amount of light at each of the front corners. I used the supplied butyl puddy to address, without issue. As of this rating I have not road tested the bed cover, while driving in the rain, as such I would not be surprised if I have a couple of weepers, to addressed. Of note, the Leer instructions are weak at best and could be enhanced to address installation, for trucks that have a drop in bed liner.
The product itself is excellent.
The instructions leave much to be desired.
Just know, the lip on the rails need to go on top of the truck bed rail.
The large clamps that hold the cover down towards the back of the bed, go into the rail itself. Use the large lip of the clamp (not the small one). If you stick the large lip into the rail it will sit level like it is supposed to.
Before you clamp it down, make sure you roll it all the way out, check to make sure that when your truck tailgate closes there isn't a gap, make sure the locks catch on both sides of the bed in each section that locks down, and make sure the seals are all flattened out (including the seal at the front of the bed under the topper).
Package arrived undamaged. 3M foam pads didn’t cooperate, other than that installation was smooth.
They sent the wrong item initially and it was a pain sending it back. However they made good on their mistake and provided the correct item which has been great.
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.