Video Transcript for Review of Pacbrake Vehicle Suspension - Alpha HD Pro Towing/Load Leveling Kit - PB72VV

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the Pacbrake Alpha HD Pro Airbag Suspension Kit with the internal jounce bumpers for your rear axle. They have a 5,000 pound load leveling capacity. Now this is a custom fit part. It is designed to fit the 2005 to 2010 Ford F-250 and F-350 four wheel drive super duty trucks. Now, this is for all trucks, including those even with fifth wheel hitches, but it is not for commercial cabin chassis trucks and it is a custom fit part.

So I do recommend for you to go to our website, use the fit guide, put in your year and model vehicle, and it'll show you that this will work for your application. Now these airbags are gonna help you stay level, drive steady, and stay in control when you're hauling heavy loads. It will include everything I have laid out here on the table, includes the air springs for the rear axle, the upper and lower roll plates, the precision, laser-cut, powder-coated steel mounting brackets. You can see all the grade five plated hardware's included. Comes with the airlines with the inflation valves, the push to connect fittings, which we've installed onto the springs that allow your airlines to connect to it.

And it does come with a set of installation instructions that'll describe how this all goes together. So basically, when the trailer is loaded and your bed is full, your truck needs more than stock rear springs to stay level and in control. That's where these Alpha HD Pro Air Springs come into play 'cause they're going to add up to 5,000 pounds of rear axle support, helping your truck stay steady and secure through every haul. So whether you're pulling a fifth wheel, hauling materials or towing equipment, this upgrade's gonna keep you from sagging, squatting, and struggling for control. And bottoming out doesn't just feel rough, it could wreck your airbags.

That's why this system, the HD Pro system, includes the jounce bumpers that are inside each spring. So even with no air pressure, your suspension has a built-in safety net. So you could safely run at zero PSI when you're unloaded, which means no harsh rebound, just nice smooth, factory style ride. And also one load isn't like the next. That's why this Pacbrake gives you the freedom to adjust the air pressure from five to 100 PSI.

So basically, if you need full support for a loaded trailer, just pump it up. If you're unloaded and heading home, just drop the pressure for a lot smoother ride. So basically, with the simple manual inflation right out of the box, you're gonna get better ride quality and confidence, no matter how much you're hauling. So basically, you could start simple with the manual inflation and if you need to expand the system later with onboard air or wireless controls, the Self HD Pro system is designed to scale with your setup so it makes future upgrades easy without redoing the foundation. Also, want zoom in a little closer to show you the springs. This isn't light duty gear. These Alpha HD Pro Springs are built with one inch thick end caps on each spring, and then they use 20 internal wires on the spring to handle extreme loads without giving in. All the parts are corrosion-resistant parts. The roll plates, upper and lower plates, are designed for protection in the spring, and the powder-coated brackets will ensure that this system holds up through road salt, rain, mud, and even over time. Now, these precision laser cut brackets right here are designed to bolt cleanly to your truck's existing mounting points without any welding or drilling to your frame. And these air springs will not increase your vehicle's weight carrying capacity, but you do wanna make sure not to exceed your manufacturer's recommended weight limit. But that's gonna do it for a look at the Pacbrake Alpha HD Pro Airbag Suspension Kit with the internal jounce bumper for your rear axle.