Arrives before Christmas To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This custom fit kit lets you mount 4 Rhino-Rack 2500 legs to your vehicle with a naked roof. Clamps mount to legs with bolts. Includes 4 clamps and 4 pads.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on our 2016 Nissan Versa Note we're are doing a test fit of the Rhino Rack Vortex Aero crossbars. Now the part number for our cross bars here is RRVA1180B-2. For our foot pack we have RRRLKVA and for our fit kit for the Note we have DK 382. Now we already have that front crossbar in place we're going to show you how we put this last foot pack together here and how we put this crossbar on to our vehicle. I've gone ahead and positioned our clamp on here and tightened it down using our bolt, I'll just unscrew that tighten that down just a bit keep that clamp in place. We are going to start by removing our plastic foot here and we are going to take our pad and we're just going to insert that in, its going to face forward now that arrow there but once we get it on to our vehicle its actually going to face backwards Then we'll take our entire foot pack here and we're just going to use this piece and slide it into place. Now that loose on there you will need to provide a flat tape measure or any kind of tape measure that you may have.
We're going to have 15.6 centimeters. Hold that in place and we will tighten down this bolt here in the center. With that tightened down we're ready to put our crossbar on to our vehicle, let's start by opening our doors here. What we will do is gently and loosely place are crossbar down. Make sure that that foot pack is sitting in the right spot you may have to readjust and make sure that bolt sits in the right spot and it's loose enough.
Now we'll measure our crossbar spread. We're going to have 74 centimeters between the front middle portion of our foot pack to the back middle portion of our back foot pack. With this one measure out we will do the same to the front or to the opposite side rather. All right we have those in place, we are going to take our Rhino Rack tool and start to tighten our clamps down. I like to start by tightening it so that it sits all the way up against my door jamb here without me having to hold it up there. Do the same here on the opposite side just enough so that it sits in the right spot.
Then we'll go back and forth tightening it down doing about five to ten turns on each side. Now you'll know when it's tight enough when our skinny portion of our tort tool is completely straight so keep that in mind. As you can see here it's already straightening out so I'll just do the same thing to our other side. Now we can place on our locking covers here, secure that in place and then we can take our crossbar end caps set those on and we also have a lock for those as well. If you have any T track or T chain mounted accessories like bike racks can secure those in place and not have to worry about theft or tampering. That's going to be our completed look at the Rhino Rack Vortex Aero Crossbars and how they fit on a 2016 Nissan Versa Note. .
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.