Burco Redi Cuts RV Side Mirror Replacement Glass - Heated
This item does not fit your vehicle
2013 Nissan Altima
These items fit your vehicle
2013 Nissan Altima
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Got a cracked RV mirror but everything else is fine? This replacement glass makes it easy to fix without swapping the whole assembly. It drops right into place and includes a heat grid to help keep your view clear in snowy or muggy weather.
When only the lower convex glass is cracked and your mirror head is still usable, replacing the full mirror assembly adds work and parts you're not trying to touch. This Burco Redi Cuts piece replaces just the heated RV side view mirror glass, restoring the damaged viewing surface without swapping the full OEM mirror assembly. Once the broken glass is addressed, your existing mirror body can keep doing its job while you get a clear reflection back in that lower section.
The lower mirror section matters most when you need a wider look along the side of a large vehicle. This replacement uses a lower convex surface, so the repair brings back the wide-angle view from that lower glass area. After it's installed, you can use that section again for checking nearby traffic, lane position, and close-side clearance.
A cracked heated mirror glass can leave you choosing between fixing the view and keeping the heat function your mirror already had. This replacement includes heated glass with a built-in heat grid and is specified for heated OE mirrors only. In cold or wet conditions, that lower mirror area can return to giving you a usable side view while the heat grid works with the heated mirror setup.
Mirror glass repairs go sideways fast when the replacement is even slightly off, so the size needs to match before anything gets installed. This drop-fit glass is specified at 7-7/8" tall x 7-1/2" wide x 9" diagonal, with the longest diagonal measured from the inside upper corner to the outside lower corner. After confirming those measurements against your mirror glass, the replacement can fit into the correct lower mirror space and put that viewing surface back in use.
Replacing mirror glass often means working near old adhesive, cracked pieces, and tight mirror openings, so the edge finish matters during the repair. This replacement glass has smooth edges for safer handling while positioning the new piece. During installation, you can handle and place the glass with more control, then get back to using the mirror for a clear, reliable reflection.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone, Steve here with etrailer. Let's take a look at the Burco Redi Cut RV Side Mirror Replacement Glass. And this one is heated. So folks, this particular one's gonna fit a lot of different Freightliners and Jaycos and some other different RV coaches as well. So always make sure you're measuring and checking the fit guide here at etrailer.com to be sure you're getting the right parts the first time. Now the great thing about these replacements side mirrors is that they're gonna restore visibility without having to pay to replace the full OE mirror assembly.
And this particular guy is heated. You can see the heat back here, and you have the two prongs here that are gonna plug in to where your existing one was plugged into as well. So this is a full OE mirror assembly replacement. It's a drop fit, allowing for quick and easy installation. And again, it's a heated glass, so the built-in heat grid on the back there maintains visibility in cold and wet conditions.
Now as always, you wanna make sure you're measuring your original glass to be sure you're getting the right one the first time. So you're gonna wanna measure vertically from the top to the bottom edge, and that's gonna be 7 and 7/8 inches on this particular one. And then you're gonna wanna measure the horizontal width, seven and a half inches on this one. And then you're gonna wanna measure diagonally from the inside upper and outside lower. And on this particular one, I got nine inches.
So again, folks, if I was measuring this one, top to bottom, 7 and 7/8 inches, seven and a half, and then on the longest diagonal, nine inches. And then you do get these pads here to aid with installation as well, and they have an adhesive on the back. So make sure you're following the instructions that are included to be sure you're getting installed correctly the first time. If you don't wanna tackle the installation, we got you covered. We have Etrailer trusted installers in your area.
Just scroll down below the video or the photos on the product page and look for the install locator link and type in your information and we'll get you in touch with someone that can do the install in your area. I'm Steven, thanks for watching.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.