RV bathroom faucet has 1/4-turn stems that prevent leaks so you won't have to worry about wasted water. Washerless design reduces daily wear and tear to help extend the life of your faucet. Includes mounting hardware.
Features:
Specs:
To install, use the inlet shanks to drop the new faucet in place of your existing faucet. Then tighten the included mounting nuts against the underside of the counter, and connect the hot and cold water lines. You'll need to keep some tub and tile caulk (not included) on hand to help prevent any leaking.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Phoenix faucets 4" dual handle RV bathroom faucet. This unit adds or replaces a bathroom faucet in your RV. It's a completely led free design. It's going to feature the dual white handles that gives the unit a really nice look. It's going to feature the nice quarter turn design. They have the H and C indicators to indicate hot and cold water.
This unit is made from a very durable, plastic construction. It's white in color. It does have a low flow aerator already installed on the unit. That's going to have a flow rate of 2.2 gallons per minute. The unit is going to require 2 holes for your mounting installation for your complete installation. These threaded connectors are the connection points for the hot and cold water lines.
They're going to be separated on center by about 4". They're going to have a length measurement of about 2" long. The outer diameter on those is 13/16". The inner diameter is 1/2". Taking a look at the base measuring front to back, you're looking at about 2 1/8". outside edge to outside edge, the unit is going to measure about 6 1/4".
We'll take a measurement of the height, from the mounting surface to the tallest point of the unit, you can see that's going to measure about 3 1/8". The overall depth from the back of the mounting surface or from the base in the back of the unit to the furthest out point of the spout area, you can see that measures just over 5" about 5 1/8" to 5 1/4". The water outlet height from the mounting surface, what we can do is take a measurement from the bottom of the aerator to this point right here, that's going to give us a measurement of pretty close to 1". It's a pretty simple installation. Again it's going to require 2 mount holes. Those are going to need to have a diameter of 1", separated on center by 4".
It does come with the one piece mounting plate or backing plate and it's going to come with the threaded mounting nuts. These get installed on the underside of the mounting surface and add a lot of security to the unit. It's also going to come with your detailed installation instructions. These are going to walk you through the installation process step by step. Nice detailed diagrams there. Again, it's just going to help with the install. On this side we're going to have operating instructions and some helpful hints. On the back side we're going to have a detailed breakdown of the parts list. That's going to do it for today's look at the Phoenix faucets 4" dual handle RV bathroom faucet.
great service
Thank you for your good service Greg s
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.