Sitting down at your RV dinette shouldn't mean squinting under harsh light. This textured black 12V ceiling fixture uses an integrated 3.5W LED for 3500K warm white light, with an inner fabric shade, outer metal net design, and a built-in switch.
When your dinette light burns out mid-trip, tracking down the right bulb is the last thing you want to do. This fixture uses an integrated 3.5W LED, so the light source is built in instead of relying on a replaceable bulb. You keep the overhead light working without stocking spares or guessing at bulb types.
Lighting that runs too cold can make a small RV feel stark when you're eating or reading at night. This light puts out 3500K warm white light, so the dinette stays lit with a warmer tone instead of a blue-white cast. You can sit down at the table without the light looking harsh.
If the switch isn't where you expect it, you end up reaching around the cabin just to turn on the light. This fixture has a built-in switch for convenient operation, so the on and off is right on the light. You can flip it from the dinette and get back to what you were doing.
A bare light source can look unfinished over the dinette, especially in a small interior where everything is in view. This fixture uses an inner fabric shade with an outer metal net design, so you get a layered look instead of a plain cover. The ceiling stays visually interesting without turning into a bulky box.
RV interior lights commonly run on 12V, and mixing in other power requirements can complicate the wiring plan. This fixture runs on a 12V system compatible for RV interior use, so it stays in line with typical RV interior lighting power. You can keep the setup focused on the 12V system instead of adding a different power need.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone, Steve here with etrailer. Today, we're looking at our Gustafson Dinette Light with an Internal Fabric Shade. Now, folks, this is a matte black finish on the metallic crosshatch pattern on the outer shade. And what I got when I measured was seven inches tall overall from the top of the mounting plate down to the bottom of that fabric shade. And then the diameter outside the outside on the metal part, I got 13 inches wide and roughly 10 1/2 inches wide on the shade part itself. Now, this, as you can see, is a textured black finish.
I do apologize for it hanging slant, I just have it kind of loosely hung up here today with some fish wire and stuff just for your viewing pleasure. And there are one, two, three holes here in the top for mounting it. There's no hardware included. You need to source that locally if you don't already have some with your current lighting fixture. And this uses a simple 12-volt power connection.
You have a nice little push button here on the side. You just push that in on and off. (light clanging) And I'm gonna go ahead and shut off the overhead lights in the studio and zoom out so you can get a better look at the light. So, as you can see, putting off a nice amount of light, and it is just a single LED bulb inside of there. And it's a very nice design.
I like how you can kind of see the light past the metal cross hatch pattern there. So, very nice. It's an integrated 3.5-watt LED. It provides 3,500 Kelvins of warm white light, so it's a very soft, yet warm, light that's gonna be great for the inside of your camper RV. And again, runs on 12 volts of power.
Now, if you have any questions about this or any other products we carry, reach out to us. We're here to help you in any way we can. I'm Steven, thanks for watching.
Do you have a question about this RV Interior Light?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.