Product Experts Available Now!
Call 1-800-940-8924
Solera RV Slide-Out Awning - 127" Wide - White
(1449 reviews)
Price: $653.29
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (1449)
- Q & A (0)
- Photos
Solera RV Awning - LCV000163294
Highlights
- Keeps Debris and Water Off Your Slide-Out: Prevents clogging leaves, pooling water, and mildew that can damage seals.
- Extends and Retracts Automatically: Moves with your slide-out so you never have to roll or unroll it manually.
- Holds Up in Harsh Weather: Heavy-duty 13.5-oz vinyl with heat-welded seams won’t crack down to -25°F.
- Blocks Sun to Keep Interior Cooler: Adds shade over the slide to reduce heat buildup inside.
- Simple Two-Person Installation: Includes brackets, awning rail, and hardware for quick setup.
- Sized for 122"–127" Slide-Outs: Provides full coverage with 48" extension and 127" awning rail.
Features to know about
Keeps Rain and Debris Out: Automatic Slide-Out Coverage
This topper shields your slide-out roof from leaves, twigs, and standing water that can clog seals or cause leaks. It extends and retracts automatically with the slide-out, so debris stays off the top whether you’re setting up or packing up. By keeping the roof clear and dry, it helps prevent mildew and water damage that can sneak in through the seams.
Built to Last Outdoors: Heavy-Duty 13.5-oz Vinyl Fabric
The fabric is made from premium 13.5-oz vinyl that’s strong enough for regular outdoor use. It’s cold-crack tested down to -25°F, so it won’t stiffen or split when the temperature drops. The seams are heat-welded instead of stitched, sealing out water and giving the material a long service life even through heavy rain or winter storage.
Sized Right for a Solid Fit: 127" Awning Rail and 48" Extension
Designed for slide-outs measuring 122" to 127" wide with a 48" projection, this topper gives full edge-to-edge coverage. The awning rail is 127" long, and it only needs 7" of clearance on each side for installation. If space is tight, you can go one size smaller and still get complete protection.
Simple Two-Person Install: All Hardware and Brackets Included
Everything needed comes in the box, including the brackets, awning rail, and hardware. The roller tube already has the fabric attached, making setup straightforward. With self-tapping screws and access plates that slide into place, two people can mount it in just a few steps using basic tools.
Clean, Coordinated Look: White Fabric and Hardware
The white vinyl fabric matches the white hardware for a clean finish that blends nicely with most RV exteriors. Once installed, it gives a neat, streamlined look while quietly doing its job to protect your slide-out every time you set up camp.
Specs
Application
- Application: slide-outs 122" - 127" wide with 48" extension
- Minimum clearance: 7" needed on both sides of the slide-out - order next size down if needed
- Required clearance between 2 slide-outs: 14" total
Dimensions
- Awning rail length: 127"
- Awning fabric (when fully extended): 127" wide x 48" long
- Bolt hole diameter: 3/16"
- Mounting bracket dimensions: see below
Warranty
- Warranty: 1-Year
Note
It's important that the slide-topper sits at as steep an angle as possible so that any rainwater will drain immediately. Any water that sits in the awning can stretch out the fabric permanently and warp it out of shape.
V000163294 Lippert Solera 10'7" Slider (Slide-Topper) in White w/ White Hardware
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
Ratings & Reviews
4.5
1449 reviews
by:
Kevin
03/16/2026
Lippert instructions need a picture of the spring to remove when releasing the awning
by:
Phil
08/30/2024
Everything was fine except one of the parts received was incorrect. This may have been due to a fault with the manufacturer. The bracket and extension bar were incompatible. Once reported customer service took care to correct the problem.
by:
Patrick
09/29/2025
Great product, shipping, and overall experience shopping with Etrailer. Thank you!the awning fit and looked as described.
by:
Harold
04/13/2026
Topper is correct, very fast ship via TForce. Perfect! All good here!
by:
Ronald
10/30/2025
We had some strong thunder storms in OK. this spring. The awning diverted the heavy rains and withstood the strong winds. Install was easy, I would recommend this awning. Thank you
by:
Dennis
05/08/2023
Excellent anyone that can use basic hand tools and follow written directions can install this slide-out awning. Directions were very clear and easy to follow.
by:
Steven
08/08/2023
E-trailers is awesome; always deliver quickly, high quality products, and great customer service to ask questions and get answers that help you buy what you need!
by:
Richard
12/04/2020
Packaging from LCI was excellent to prevent damage, installation is easy.
by:
Sid
10/04/2021
On Time, great product
by:
Russell
07/20/2025
The slide-out awnings were easy to install. One issue I encountered was with one of the set screws. There was excess paint in the threaded hole. I cleaned the threads with a tap and it worked fine.
Russell
7/21/2026
I have been using my slide awnings for a year now without any issues. I dont have to worry about sticks and pine cones getting on top of my slide outs. It keeps me from having to climb on top of the RV. I highly recommend these to everyone I see.
Christopher H.
7/21/2026
@Russell Happy to hear the # LCV000165063 is holding up well for you! Thanks for the recommendations and we hope you having a good summer.
Christopher H.
7/21/2026
@Russell Happy to hear the # LCV000165063 is working well for you! Hope you're having a great summer.
by:
Scott
05/19/2025
I received the 121" awning a few months in delay, but this was not etrailer's fault. They kept in constant contact with me and I appreciate that. The awning came on an 18 wheeler and the extruded channel had been bent slightly, but easily fixable. The hardware pack was good and wrapped up nicely. Overall, a great purchase and easy to install like 2 hours with a friend. Watch the video for the installation tips it's very helpful. Definitely worth it!
Brooke M.
5/20/2025
It looks like you nailed it with the install! I'm in "aw"ning, haha. Do you have any install tips you learned when you put on the awning?
Brooke M.
5/22/2025
@Scott Haha I like that advice! Thanks, Scott. Enjoy your Memorial Day weekend! :)
Scott
5/20/2026
Still working great..keeps my slide out roof clean.
James D.
5/20/2026
@Scott love to hear things like this, appreciate your reply and choosing etrailer!
by:
Dad ll Fix It - Mobile RV Repair
03/19/2026
The solera slide toppers are the best! Mounting is very easy, just make sure to have two people with you. I did a 67" myself, but it was difficult feeding it into the track.
Lazer S.
3/24/2026
Glad you like it! And having more than one person is definitely a good idea. These things get pretty long and awkward. What did you install this on?
by:
Barbara
10/17/2025
Product is as expected. The product was received with scratches on the metal mounting brackets. This is disappointing since the brackets are 100% visible. I will try some wax to hide or diminish unsightliness. Improved packaging suggested. Directions for install were acceptable and there were online resources.
Barbara
10/19/2026
Product is functionally working great. Paint and wax were required to diminish visible scratches.
Jameson C.
10/19/2026
@Barbara great to hear!
by:
Thomas
06/29/2025
Purchased this for our new 2025 Winnebego 2108DB trailer as a self install. Installation was very easy, easy enough I could install it almost completely without help. I did need a helper when fitting the roller into the brackets. Included instructions were clear and easy to follow. Since this is a new install, I can't comment on the durability of this accessory, but time will tell, it looks like it's of good quality.
Thomas
6/30/2026
After a year of use, the slide topper awning still looks and works great. Youd never know it wasnt a factory install. So far, no signs the Arizona sun is deteriorating the fabric, although I try to treat it with 303 Protectant, and keep the trailer covered when not in use. Still very happy with my purchase.
by:
Chris W.
10/05/2026
Perfect addition to our 2025 Lance Squire 1995. Took less than an hour for me to prep and mount the brackets and less than an hour for my son and I to mount the awning and clean up.
Robin H.
10/7/2026
Thanks for the pictures and video, looks great!
by:
Michael
10/17/2025
Fairly simple to install if you have a decent amount of handyman skills. Instructions could be better. Love how they turned out. Little insurance for my slide outs. Hope they last.
Lazer S.
10/21/2025
I think you are selling yourself a little short, Michael. Install looks like it was done by the manufacturer! Great job! Any more trips planned for the year?
by:
Michael
05/05/2024
Delivery went well, slight damage to tube, contents were fine. Install was pretty simple, following video from etrailer. Very pleased with quality of topper n look of it on our Camper which is a 2021 Keystone Passport. I've ordered a few things from etrailer n haven't ever had an issue.
Michael
5/7/2025
Couldnt be happier with slide out topper. Keeping waterdebri off slide out, protecting seal which was the goal. Not one issue with item, working great after 1 yr n probably for years to come.
by:
Joel
04/25/2026
Great product. Easy to install.
Gwendolyn Y.
4/30/2026
Looks great, Joel!
by:
Steve Kading
10/01/2025
Only complaint is the shipping tube lost one metal end and other end was all bent up. Need better ends for shipping tube. By this the awning end paint was scratched up! Lucky I didn’t lose any parts on the opened end of tube!
by:
Keath D.
07/22/2025
I went camping to find in the morning that our slide topper had come apart in the middle. We have only a few trips out with it. This is clearly a part that was not glued properly or the glue failed and allowed the material to slide out in the middle. Really disappointed!
by:
Unsatisfied customer
06/06/2026
Worst customer service ever. It took 6 different people to correct etrailer’s mistake even having to explain over and over their own part numbers they managed to get it wrong, they shipped me multiple different parts that were incorrect parts over and over. I finally order the proper parts from a different vendor who got it right the very first time. You will later be inundated with dozens of requests to “tell us how we did” well, etrailer did a crap job and are over priced too. They never stop harassing you to do reviews either
by:
Dan
05/22/2025
I have been completely satisfied with the support I receive from etrailer. I always get online to browse the catalog for what I need and then call Will to verify what I intend to order. He expertly walks me through the pros and cons of what I am getting and how that affects my needs. I am always pleasantly surprised by the variety and volume of parts and equipment that is available for anything from my equipment trailers to my camper.
Brooke M.
5/23/2025
That is fantastic, Dan! So glad Will has been able to help you out. Camper looks awesome. Do you have any Memorial Day Weekend plans?
by:
Rick
08/05/2026
The awning design is poor and does not work as indicated. The fabric is weak and Water builds up in a pool causing unnecessary weight on the slide out. Would definitely would not buy again!
by:
Travis
01/03/2019
While we love the slide out on our travel trailer, that is nothing but a potential problem. Leaves and debris lay on top and eventually prevent a good seal when closed, water pooling and potential leaking...and the list goes on.
We made the decision to buy and self install the Solera Slide Topper. The topper arrived in a large, well packed cardboard tube. All parts were present. It took my wife and I about 1:45 minutes to complete the installation. We are super pleased with how it turned out and have no complaints at all. Once again...eTrailer to the rescue!
I will note a couple of things that buyers/installers need to be aware of. While none of these are a deal breaker...knowledge is power. Some of the hardware (screws) are not painted black. After installation, I took a can of black spray paint and sprayed a little in a paper cup and used a Q-tip to apply the paint to the unpainted heads. The other thing is the tension. Wow...that is one strong spring! I found that the tension was so tight that it actually prevented the top of the slide out from fully extending. I knew this because before installing it I actually felt how tight the inside seal was against the interior wall when the slide was out. After the install I could easily slip my fingers between the inside trailer wall and the slideout seal. I ended up unwinding the spring by two full turns. After that, the slideout seal was firm against the interior wall! Yea! The awning itself was still very taunt and without sag.
A word of caution about removing the spring keeper pin or unwinding the arm. Make sure you FULLY understand what you are doing. That is NOT something you want to mess up on. While we had no problems in doing this...I am familiar with spring loaded rotational forces and understand the instant damage they can do!
Very pleased...and would highly recommend this product to anyone looking for an inexpensive way to cover and protect your slide out!
We made the decision to buy and self install the Solera Slide Topper. The topper arrived in a large, well packed cardboard tube. All parts were present. It took my wife and I about 1:45 minutes to complete the installation. We are super pleased with how it turned out and have no complaints at all. Once again...eTrailer to the rescue!
I will note a couple of things that buyers/installers need to be aware of. While none of these are a deal breaker...knowledge is power. Some of the hardware (screws) are not painted black. After installation, I took a can of black spray paint and sprayed a little in a paper cup and used a Q-tip to apply the paint to the unpainted heads. The other thing is the tension. Wow...that is one strong spring! I found that the tension was so tight that it actually prevented the top of the slide out from fully extending. I knew this because before installing it I actually felt how tight the inside seal was against the interior wall when the slide was out. After the install I could easily slip my fingers between the inside trailer wall and the slideout seal. I ended up unwinding the spring by two full turns. After that, the slideout seal was firm against the interior wall! Yea! The awning itself was still very taunt and without sag.
A word of caution about removing the spring keeper pin or unwinding the arm. Make sure you FULLY understand what you are doing. That is NOT something you want to mess up on. While we had no problems in doing this...I am familiar with spring loaded rotational forces and understand the instant damage they can do!
Very pleased...and would highly recommend this product to anyone looking for an inexpensive way to cover and protect your slide out!
Travis
1/4/2020
Our slide-out awning is still functioning perfectly. Since I had loosened the tension a bit I was concerned about it maintaining good tension over time. No problem. Still perfect! There is no noted degradation of the canopy or hardware. Thanks!
25
1449
true
Show More Reviews
See what our Experts say about this Solera RV Awning
- Recommended Slide Topper for a 124.5" Wide Slide-Out Prepped w/ Solera Brackets Welcome back Eric and thanks for the dimensions! For a 124.5” slide-out, you'll need the Solera RV Slide-Out Awning item # LCV000168326 in black or item # LCV000163294 in white. These toppers are 127" wide x 48" long and include the necessary mounting brackets to attach to your track and the front of the slide-out. They fit 122"–127" slide-outs. Please note that you will need 7" on both sides of your slide-out for clearance when installing one of the Solera RV Slide-Out Awning item # LCV000168326...
view full answer... - How Much Does a Slide Topper Typically Hang Over a Slide OutI attached a picture that shows about how much a slide topper typically hangs over a slide out when installed for you to compare to what you have. If you can get me the width of your slide out including the distance from outside of flange to the outside of the other flange I can help you pick out what you'd need.
view full answer...
- Recommended Slide Topper For A Slide Out Measuring 122" Flange to Flange. Since your slide measures 122" from flange to flange, you will need to go with a 127" long awning fabric. This will be the best size for your slide because it will give you a bit of overhang on each side and fully protect your slide out. If we were to go with the next size down it would not full cover the slide. You just need to pick what color you want. We offer the following: Solera RV Slide-Out Awning - 127" Wide - White # LCV000163294 Solera RV Slide-Out Awning - 127" Wide - Black...
view full answer... - Solera RV Slide-Out Awnings for your 2022 Grand Design Reflecting 31MBFor your slide-out listed as being 116-1/4" as measured from outside edge of flange to outside edge of flange, I suggest the Solera RV Slide-Out Awning - 10'1" Wide & 48" Projection, # LCV000163293 for white or # LCV000182037 for black. For your slide-out listed as being 81”5/8” as measured from outside edge of flange to outside edge of flange, I suggest the Solera RV Slide-Out Awning - 7'1" Wide & 48" Projection, # LCV000165062 for white or # LCV000163287 for black. For your slide-out...
view full answer... - Solera Slide-Topper Awning Recommendation for 122" Wide Slide OutIt sounds like you're needing an awning that fits RVs with slide-outs 122" - 127" wide and up to 48" long. Since this is the case you need one of the following options: Black - # LCV000168326 White - # LCV000163294 These measure 10'7" wide x 48" long and come with everything needed to get them installed. Attached is a review video for you to check out!
view full answer... - Awning Recommendation for a 124" Slide Out on a Hideout 186SS TrailerThe best option we have for your 124" wide slideout on your Hideout 186SS is the Solera RV Slide-Out Awning - 10'7" Wide - 48" Projection # LCV000168326 (black) or the # LCV000163294 (white). The great thing about the Solera awnings is that the fabric is made of strong vinyl that prevents cracking. It is also made 100% in the U.S.A. In order to make sure this is the perfect fit for you, you need to make sure you have at least 7" of clearance on both sides of your slide to accommodate...
view full answer... - Solera Slide-Out Awnings for 88", 122", and 146" Slide-Outs As long as the measurements you listed are from the outside of each flange on your camper the correct Solera Slide-Out Awnings for your three slide-outs are as follows: 88" slide-out - Solera # LCV000168106 in Black or # LCV000163288 in White 122" slide-out - Solera # LCV000168326 in Black or # LCV000163294 in White 146" slide-out - Solera # LCV000165061 in Black or # LCV000163299 in White These assemblies will work perfectly for the flange widths that you listed and they will have the...
view full answer... - Recommended Slide-Topper for a 127 Inch Long Slide-Out on a 2011 Forest River Wildwood XL-LiteFor the 127" long slide-out (flange to flange) that you have on your 2011 Forest River Wildwood XL-Lite travel trailer, I recommend using the Solera 11' Slider (Slide-Topper) part # LCV000163294 for white or part # LCV000168326 for black. This slide-topper will be an excellent option for you as it is specifically designed for your 127" long slide-out. They are made right here in the U.S.A. and come with a 1-year warranty. I have attached a review video on a similar slide-topper for you as well.
view full answer... - Slide Topper for 144 Inch and 127 Inch Flange to Flange MeasurementWe have slide toppers that will work great for you but they won't be able to extend two inches past the flange; the reason being that the hardware isn't designed to accommodate a longer extension, which means to get a working slide topper you will need to stick with the proper size. - 127 Inch Measurement: Solera RV Slide-Out Awning - White # LCV000163294 or Black # LCV000168326 - 144 Inch Measurement: Solera RV Slide-Out Awning - White # LCV000163298 or Black # LCV000177334
view full answer... - Correct RV Slide Out Awnings for Trailer With 81", 116", and 122" SlidesThe correct Solera RV Slide-Out Awning for this trailer are as follows: 122-1/4" : part # LCV000168326 or part # LCV000163294 116-1/2" : part # LCV000182037 or part # LCV000163293 81-3/4" : part # LCV000165062 or part # LCV000163287
view full answer... - Slorea Slide-Toppers Needed for a 122" Slider and a 147" SliderFor your 1st slide you need the 11' Solera Slider. Use part # LCV000163294 for White (which is preferred) or part # LCV000168326 for Black. The 2nd slide needs the 13' Solera Slider. Part # LCV000163299 is the preferred White option while part # LCV000165061 is the Black option that is also available. These come with the hardware that is needed and it is the same color as the awning itself. Both the 11' and the 13' options are 50" wide and the pricing can be found on the product pages.
view full answer... - Recommended Slide-Topper For Slide-out That Has Overall Measurement Of 125-3/4 InchesSince the overall width of your awning measures 125-3/4 inches flange-to-flange, I recommend the 11-ft topper # LCV000163294. This topper is designed for an overall box width with the flanges from 122 to 127-3/4 inches. This topper is White, but if you prefer a Black topper you would need part # LCV000168326.
view full answer... - Solera Slide Topper RecommendationThe measurement needed to determine the topper size needed is to measure from the outside edge of the flange to the outside edge of the other flange on the slide out. You also need to allow for 7" of clearance on both sides to make sure your topper arms don't come into contact with anything else. If your measurement is 127" then you'll want the Solera RV Slide-Out Awning - 10'7" Wide - 48" Projection - White Item # LCV000163294 or for black # LCV000168326. The # LCV000163299 awning is...
view full answer...
Do you have a question about this RV Awning?
Info for this part was:
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Expert Research:
Jeffrey L
Updated by:
Chelsea B
Updated by:
Shelly K
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Mike S
Updated by:
Isabelle B
Updated by:
Amanda K
Written by:
Kristen H
Test Fit:
David F
Test Fit:
Ethan H
Video by:
Ryan G
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Phil
8/31/2025
The slide out awning is working out very well. It was relatively easy to install. Unfortunately, although I met the minimum height for the awning above the slide out the pitch wasnt quite enough to keep water from collecting on the slide out. I had a choice of either increasing the tension on the roller or placing something under the awning to keep it from sagging. Because of the rather large width of the slide out I opted to place some styrofoam under the awning. This has worked out very well.