Solera RV Slide-Out Awning - 61" Wide - White

Part Number: LCV000163273

$506.43

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

solera rv awning slide-out awnings 57 inch wide 58 59 60 61 - white

solera rv awning slide-out awnings 57 inch wide 58 59 60 61

solera rv awning 57 inch wide 58 59 60 61 lcv000163273

solera rv awning slide-out awnings - 61 inch wide white

solera rv awning slide-out awnings lcv000163273

Show All (15) Product Images

Show Fewer Product Images

Videos

An In-Depth Look at the Solera RV Slide-Out Awning

DIY Install: Solera RV Slide-Out Awning on your 2018 Jayco Greyhawk Motorhome

Protect Against Damage, Leaks, and Heat: Lippert Breaks Down Their Slide Toppers

Show All (3) Videos

Show Fewer Videos

Need help with installation?

Locate installers near me

Protect your RV slide-out from debris and keep moisture out of your siding with this slide-topper awning. Prevents water damage and mildew. Made for slide-outs that measure up to 5'1" from edge to edge. Includes all necessary components. Great Prices for the best rv awning from Solera. Solera RV Slide-Out Awning - 61" Wide - White part number LCV000163273 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (1449)
Q & A (0)
Related Parts
Photos

Solera RV Awning - LCV000163273

Highlights

Keeps Water and Debris Off the Slide-Out: Creates a barrier that stops rain, leaves, and dirt from pooling or getting pulled inside when retracting.
Extends and Retracts Automatically: Moves in sync with the slide-out so protection is always in place without extra steps.
Fabric Holds Up in Harsh Weather: Heavy-duty 13.5-oz vinyl resists cracking down to -25°F and prevents leaks with heat-welded seams.
Cools and Shades the Interior: Blocks direct sunlight to help keep interior temperatures comfortable.
Simple, Secure Installation: Includes brackets, hardware, and awning rail for straightforward mounting.
Sized for 57"-61" Wide Slides: Provides 48" extension coverage while maintaining proper 7" side clearance.

Features to know about

Keeps Rain and Debris Out: Automatic Slide-Out Protection

This Solera RV Slide-Out Awning covers and protects your slide-out roof so you won’t have to worry about leaves, twigs, or water collecting on top. It automatically extends and retracts with your slide-out, keeping the area sealed every time you set up or pack up. The awning measures 61" wide with a 48" extension and fits slide-outs 57"–61" wide. It prevents water from pooling and keeps debris from getting pulled inside, reducing the chance of mildew or water damage down the road.

White Solera RV Slide-Out Awning shown installed on RV exterior

Built Strong to Withstand Weather: 13.5-oz Vinyl Fabric

The heavy-duty 13.5-oz vinyl fabric is made for outdoor use and handles everything from sun exposure to cold winters. It’s cold-crack tested down to -25°F so it won’t stiffen or split when temperatures drop. The seams are heat-welded instead of stitched, which keeps water from leaking through and helps the topper last longer.

Close-up of white Solera RV slide-out awning fabric showing durable vinyl material and seams

Simple to Install: One-Piece Fabric and Roller Assembly

The awning fabric comes pre-installed on the roller tube, so setup is straightforward. You’ll use the included mounting brackets, hardware, and 61" awning rail to attach everything securely. The design uses self-tapping screws and an access plate that makes it easy to position and align. Once it’s mounted, the topper automatically rolls in and out with the slide-out—no manual steps each time you park.

Installation view of Solera RV Slide-Out Awning mounted on slide-out extension of RV

Solid Fit for Slide-Outs with Limited Clearance

For proper operation, you’ll need at least 7" of clearance on each side of your slide-out. If space is tighter, you can step down one size and still get full coverage. When two slide-outs are next to each other, keep a total of 14" between them for both toppers to fit cleanly. The topper’s white fabric matches its white hardware for a clean, uniform look that blends well with most RV exteriors.

Specs

Application: slide-outs 57"–61" wide with 48" extension
Awning rail: 61" long
Awning fabric (fully extended): 61" wide x 48" long
Bolt hole diameter: 3/16"
Minimum 7" clearance required on each side
1-year warranty

Specs

Application

Application: slide-outs 57" - 61" wide with 48" extension
Minimum clearance: 7" needed on both sides of the slide-out - order next size down if needed
Clearance between 2 slide-outs: 14" total clearance required

Diagram showing how to measure an RV slide-out for correct awning size, indicating edge-to-edge measurement points and required clearances

Dimensions

Awning rail length: 61"
Awning fabric (when fully extended): 61" wide x 48" long
Bolt hole diameter: 3/16"
Mounting bracket dimensions: see below

Warranty

Warranty: 1-Year warranty

Note

Important installation tip: It’s important that the slide-topper sits at as steep an angle as possible so that any rainwater will drain immediately. Any water that sits in the awning can stretch out the fabric permanently and warp it out of shape.

V000163273 Lippert Solera 5'1" Slider (Slide-Topper) in White w/ White Hardware

Installation Details LCV000163273 Installation instructions

4.5

1449 reviews

5 Stars		(1095)
4 Stars		(186)
3 Stars		(55)
2 Stars		(37)
1 Star		(76)

by: Bill 04/06/2021

replaced old dometic awning. fit right on to exsiting brackets. could of come with some instructions . came with no info what ever.

by: Jean connor 12/31/2020 One Year Later

The slide toppers work so good, I will always do business with this company!!!!

by: Cody 12/10/2021

by: Matthew 05/22/2025

by: Russell 07/20/2025

The slide-out awnings were easy to install. One issue I encountered was with one of the set screws. There was excess paint in the threaded hole. I cleaned the threads with a tap and it worked fine.

Click to Enlarge

Russell One Year Later

7/21/2026

I have been using my slide awnings for a year now without any issues. I dont have to worry about sticks and pine cones getting on top of my slide outs. It keeps me from having to climb on top of the RV. I highly recommend these to everyone I see.

Christopher H.

7/21/2026

@Russell Happy to hear the # LCV000165063 is holding up well for you! Thanks for the recommendations and we hope you having a good summer.

Christopher H.

7/21/2026

@Russell Happy to hear the # LCV000165063 is working well for you! Hope you're having a great summer.

by: Scott 05/19/2025

I received the 121" awning a few months in delay, but this was not etrailer's fault. They kept in constant contact with me and I appreciate that. The awning came on an 18 wheeler and the extruded channel had been bent slightly, but easily fixable. The hardware pack was good and wrapped up nicely. Overall, a great purchase and easy to install like 2 hours with a friend. Watch the video for the installation tips it's very helpful. Definitely worth it!

Click to Enlarge

Brooke M.

5/20/2025

It looks like you nailed it with the install! I'm in "aw"ning, haha. Do you have any install tips you learned when you put on the awning?

Scott

5/20/2025

@BrookeM Have two tall ladders a good friend and a 12 pack of your favorite beverage. Also, make sure you have square bits for the hardware. It's not sent with #2 Phillips screws. Other than that, a straight forward install! Watch the video...helps a ton!

Brooke M.

5/22/2025

@Scott Haha I like that advice! Thanks, Scott. Enjoy your Memorial Day weekend! :)

Scott One Year Later

5/20/2026

Still working great..keeps my slide out roof clean.

James D.

5/20/2026

@Scott love to hear things like this, appreciate your reply and choosing etrailer!

by: Chris W. 10/05/2026

Perfect addition to our 2025 Lance Squire 1995. Took less than an hour for me to prep and mount the brackets and less than an hour for my son and I to mount the awning and clean up.

Click to Enlarge

Click to View

Robin H.

10/7/2026

Thanks for the pictures and video, looks great!

by: Dad ll Fix It - Mobile RV Repair 03/19/2026

The solera slide toppers are the best! Mounting is very easy, just make sure to have two people with you. I did a 67" myself, but it was difficult feeding it into the track.

Click to Enlarge

Lazer S.

3/24/2026

Glad you like it! And having more than one person is definitely a good idea. These things get pretty long and awkward. What did you install this on?

by: Barbara 10/17/2025

Product is as expected. The product was received with scratches on the metal mounting brackets. This is disappointing since the brackets are 100% visible. I will try some wax to hide or diminish unsightliness. Improved packaging suggested. Directions for install were acceptable and there were online resources.

Barbara One Year Later

10/19/2026

Product is functionally working great. Paint and wax were required to diminish visible scratches.

Jameson C.

10/19/2026

@Barbara great to hear!

by: Thomas 06/29/2025

Purchased this for our new 2025 Winnebego 2108DB trailer as a self install. Installation was very easy, easy enough I could install it almost completely without help. I did need a helper when fitting the roller into the brackets. Included instructions were clear and easy to follow. Since this is a new install, I can't comment on the durability of this accessory, but time will tell, it looks like it's of good quality.

Thomas One Year Later

6/30/2026

After a year of use, the slide topper awning still looks and works great. Youd never know it wasnt a factory install. So far, no signs the Arizona sun is deteriorating the fabric, although I try to treat it with 303 Protectant, and keep the trailer covered when not in use. Still very happy with my purchase.

by: Michael 10/17/2025

Fairly simple to install if you have a decent amount of handyman skills. Instructions could be better. Love how they turned out. Little insurance for my slide outs. Hope they last.

Click to Enlarge

Lazer S.

10/21/2025

I think you are selling yourself a little short, Michael. Install looks like it was done by the manufacturer! Great job! Any more trips planned for the year?

Michael

10/21/2025

@LazerS Thank you for the kind words. I would have done better if it was someone else’s! I will be heading to the Lonestar Motorcycle Rally in a couple weeks.

by: Michael 05/05/2024

Delivery went well, slight damage to tube, contents were fine. Install was pretty simple, following video from etrailer. Very pleased with quality of topper n look of it on our Camper which is a 2021 Keystone Passport. I've ordered a few things from etrailer n haven't ever had an issue.

Click to Enlarge

Michael One Year Later

5/7/2025

Couldnt be happier with slide out topper. Keeping waterdebri off slide out, protecting seal which was the goal. Not one issue with item, working great after 1 yr n probably for years to come.

by: Joel 04/25/2026

Great product. Easy to install.

Click to Enlarge

Gwendolyn Y.

4/30/2026

Looks great, Joel!

by: Keath D. 07/22/2025 One Year Later

I went camping to find in the morning that our slide topper had come apart in the middle. We have only a few trips out with it. This is clearly a part that was not glued properly or the glue failed and allowed the material to slide out in the middle. Really disappointed!

Click to Enlarge

by: Unsatisfied customer 06/06/2026 One Year Later

Worst customer service ever. It took 6 different people to correct etrailer’s mistake even having to explain over and over their own part numbers they managed to get it wrong, they shipped me multiple different parts that were incorrect parts over and over. I finally order the proper parts from a different vendor who got it right the very first time. You will later be inundated with dozens of requests to “tell us how we did” well, etrailer did a crap job and are over priced too. They never stop harassing you to do reviews either

by: Steve Kading 10/01/2025

Only complaint is the shipping tube lost one metal end and other end was all bent up. Need better ends for shipping tube. By this the awning end paint was scratched up! Lucky I didn’t lose any parts on the opened end of tube!

Click to Enlarge

by: Dan 05/22/2025

I have been completely satisfied with the support I receive from etrailer. I always get online to browse the catalog for what I need and then call Will to verify what I intend to order. He expertly walks me through the pros and cons of what I am getting and how that affects my needs. I am always pleasantly surprised by the variety and volume of parts and equipment that is available for anything from my equipment trailers to my camper.

Click to Enlarge

Brooke M.

5/23/2025

That is fantastic, Dan! So glad Will has been able to help you out. Camper looks awesome. Do you have any Memorial Day Weekend plans?

by: CS 02/19/2026

Excellent Customer Service…Excellent product

Click to Enlarge

by: Travis 01/03/2019

While we love the slide out on our travel trailer, that is nothing but a potential problem. Leaves and debris lay on top and eventually prevent a good seal when closed, water pooling and potential leaking...and the list goes on.

We made the decision to buy and self install the Solera Slide Topper. The topper arrived in a large, well packed cardboard tube. All parts were present. It took my wife and I about 1:45 minutes to complete the installation. We are super pleased with how it turned out and have no complaints at all. Once again...eTrailer to the rescue!

I will note a couple of things that buyers/installers need to be aware of. While none of these are a deal breaker...knowledge is power. Some of the hardware (screws) are not painted black. After installation, I took a can of black spray paint and sprayed a little in a paper cup and used a Q-tip to apply the paint to the unpainted heads. The other thing is the tension. Wow...that is one strong spring! I found that the tension was so tight that it actually prevented the top of the slide out from fully extending. I knew this because before installing it I actually felt how tight the inside seal was against the interior wall when the slide was out. After the install I could easily slip my fingers between the inside trailer wall and the slideout seal. I ended up unwinding the spring by two full turns. After that, the slideout seal was firm against the interior wall! Yea! The awning itself was still very taunt and without sag.

A word of caution about removing the spring keeper pin or unwinding the arm. Make sure you FULLY understand what you are doing. That is NOT something you want to mess up on. While we had no problems in doing this...I am familiar with spring loaded rotational forces and understand the instant damage they can do!

Very pleased...and would highly recommend this product to anyone looking for an inexpensive way to cover and protect your slide out!

Click to Enlarge

Travis One Year Later

1/4/2020

Our slide-out awning is still functioning perfectly. Since I had loosened the tension a bit I was concerned about it maintaining good tension over time. No problem. Still perfect! There is no noted degradation of the canopy or hardware. Thanks!

by: Rick 08/05/2026 One Year Later

The awning design is poor and does not work as indicated. The fabric is weak and Water builds up in a pool causing unnecessary weight on the slide out. Would definitely would not buy again!

by: Ken S 11/02/2017

A friend and I installed this topper today on a Winnebago 2101DS travel trailer. It took a little over one hour and we didn't run into any real problems. One thing the instructions said to do was to mount the hex aluminum bar in the end bracket using a self tapping 1/4-20 screw. Seemed almost impossible to do so I used a 1/4-20 tap. Worked fine.
Once the slide topper is squared away and goes in and out properly the paper instructions want you to install a black self tapping screw in the fabric slot within 1" of the end of the fabric. I didn't like the idea of running the screw through the fabric. I had some black tubing from another project which I used for the block to keep the slide fabric from moving.
The topper seems to be high quality and certainly will provide additional protection from the elements. This is definitely a two man job and my friend was great help. When we were sliding the fabric into the slide topper rail we found the best way was for me to be on the roof supporting the topper while my friend guided the fabric into the rail slot.

Click to Enlarge

Ken S. One Year Later

11/2/2018

I assume it has been working well but I dont know since we traded the trailer for a larger one last April.

by: Edward 06/13/2020

After searching the internet and checking reviews I chose etrailer for my slide out awning. I have shopped at Camping World who had the same awning but a lower price. After contacting etrailer with their price match I got the awning plus a few dollars less shipped to my door! Communications were excellent!
The installation was straight forward with ample instructions. The mounting brackets for the slide out has two positions, an upper and lower to provide clearance between the roll and top of the slide out. I used the upper. Hardware was great quality. There is ample adjustments in the brackets side to side if needed. My trailer a 2020 Aspen Trail 2750BH has the “C” rail as part of the gutter so I didn’t need to install the one provided with the awning! My wife and I installed the awning with two ladders and did not have any problems. Make sure and use the silicone spray as it really makes the awning easy to slide thru the C channel. We are happy with our purchase and will definitely use etrailer for our needs! Thank you for a quality product!

Click to Enlarge

Edward One Year Later

6/14/2021

Very pleased with our awing! We go camping once a month and have used it many times since we installed it. Still looking good, no sun fade or any other problems. It is a quality product! etrailer is my go to source! Never disappointed!

by: Richard 06/26/2026

This order has not been delivered. The first one you tried. To deliver was too damaged to use. Now the replacement you sent and claim was delivered never arrived.

Mike L.

6/26/2026

Let me look into that and get you an ETA...

by: Arthur 07/14/2018 One Year Later

After a year the product I purchased and installed has been wonderful. As you can see from the picture(s) it is still in great shape and protects our camper slide.
Topper was easy to install for a DYI and the assistance of video on installation prep and advice from etrailer was the ticket to successfully completing the job with no trouble.
Topper material is quality material and hardware was very good. Love the results and no issues with anything falling on the top of my slide increasing the risk of damage to slide and or seals.

Click to Enlarge

Arthur One Year Later

7/14/2019

Topper still going strong after many camping trips since installation. No issues to talk about. Topper is doing the job it is intended to do. Very satisfied.

by: DTP 04/23/2025 One Year Later

The Slide topper was easy to install and looks and works great. After one year it still is the same as when installed.

Dtp One Year Later

4/24/2026

Works well but moisture has gotten under it and soiled the white fabric

1449

true

Show More Reviews

See what our Experts say about this Solera RV Awning

Do you have a question about this RV Awning?

How to Determine Correct Slide Out Awning for Trailer
You do need 6 inches of clearance from the edges of your slide box in order to fit a Solera awning. To determine the correct slide-out awing you simply need to measure from flange to flange and the fabric will need to extend at least 2-1/2 inches beyond that measurement. For example, if you measured 149 inches from flange to flange you would need the Solera 13' Slider (Slide-Topper) # LCV000165061 (Black) or # LCV000163299 (White). The assembly will only extend a few inches past the awning,...
view full answer...
Slide Topper for Flange-to-Flange Measurements of 59 Inches and 150 Inches
We do have the slide toppers you need for each of the flange-to-flange measurements of 59 inches and 150 inches. You can choose from either black or white in color; the parts that will work are the following: 50 Inches - Black: Solera RV Slide-Out Awning # LCV000168104 - White: Solera RV Slide-Out Awning # LCV000163273 150 Inches - Black: Solera RV Slide-Out Awning # LCV000165061 - White: Solera RV Slide-Out Awning # LCV000163299 Because the 155 inch flange-to-flange slide topper would...
view full answer...
Correct Slide Topper Awning for a 2017 Keystone Cougar 28RKS
The correct Solera RV Slide-Out Awnings for a 2017 Keystone Cougar 28RKS is part # LCV000165061 for black or part # LCV000163299 for white for the big slide and part # LCV000168104 for black or part # LCV000163273 for white for the small slide.
view full answer...
Recommended Solera RV Slide-Out Awning for 55 Inch and 111 Inch Slide-outs
For your 56" wide slide-out, as measured from the outside of your RV, flange-to-flange of the slide-out. - Solera RV Slide-Out Awning, # LCV000168104 - black - Solera RV Slide-Out Awning, # LCV000163273 - white For your 111" wide slide-out: - Solera RV Slide-Out Awning, # LCV000251461 - black - Solera RV Slide-Out Awning, # LCV000163292 - white
view full answer...
Recommended Slide Toppers For 57-1/2", 72-1/2", 139-3/4", 145-1/2" Flange To Flange Measurements
When adding slide toppers to your slide-outs it's recommended to have at least 7" of clearance on each side of the flanges. If you do not have that much clearance please let me know on which slide-out and what amount of clearance you do have and I can make sure the I have the correct fit for you. Assuming you have the 7" of clearance I have the following recommendations for you: 57-1/2" - Solera RV Slide-Out Awning - 5'1" Wide - 48" Projection - White Item # LCV000163273. 72-1/2" - Solera...
view full answer...
Is There Black Version of Solera RV Slide Out Awning # LCV000163273 and Does it Come with Hardware
We have a black version of the Solera awning you referenced with the part # LCV000168104 and this does come with all the mounting hardware you'll need including an awning rail.
view full answer...
Adding Slide Out Awnings To A Gran Design Momentum 5th Wheel
I am not sure what that measurement may be, but it is common for them to be around 3", but it could vary from trailer to trailer, however I found some awnings for you: Topper 1 & 4: Solera RV Slide-Out Awning # LCV000165062 in black, and # LCV000163287 for white. Topper 2: Solera RV Slide-Out Awning # LCV000168107 in black, and # LCV000163289 for white. Topper 3: Solera RV Slide-Out Awning # LCV000168104 in black, and # LCV000163273 for white. If you don't have at least 7" of clearance...
view full answer...
Recommended Slide Out Topper Awnings
Of course, I have the following recommendations from Solera based on the measurements you gave me: Closet 59": Black # LCV000168104 or White # LCV000163273. Kitchen 149.5": Black # LCV000165061 or White # LCV000163299. Living Room 142.5": Black # LCV000177334 or White # LCV000163298. I do want to note that we recommend having at least 5-7" of clearance on each side for the roller and roller arms to properly open and close. If you do not have enough clearance let me know and we can go...
view full answer...
Which Slide Out Toppers Are Needed for 56" Wide and 111" Wide Slide Outs
When measuring to find the correct slide out topper, you'll want to measure from flange to flange on the outside of the slide to determine the correct fit, and you want the slide to hang over the slides about 3 inches on each side to provide adequate protection. It looks like you've measured 56" and 111" (rounded up), so you'll want to use the Solera RV Slide-Out Awning - 5'1" Wide - 48" Projection - White # LCV000163273 for the smaller slide out and the Solera RV Slide-Out Awning - 9'7"...
view full answer...
Recommended Slide-Topper for 60 Inch Box Width on Trailer
When determining the correct Slider (Slide-Topper) to install on your trailer, you will want to first measure your box width. This is measured on the outside front of the box, including the flange. I have attached an installation video to assist. If you measured a box width on your trailer of 60 inches, then the Solera 5.5' Slider in Black # LCV000168104 or White # LCV000163273 should be the correct size. This Slider works well with box widths of 56 to 61-3/4 inches and will extend up...
view full answer...
Slide Topper Recommended for 4-1/2 Foot Slide on RV
If the 4 foot 6-1/2 inch measurment you provided represents the widest part of the slide out, which is the outside flange to outside flange dimension, the Lippert Solara # LC23FR which is designed for slides up to 60 inches wide would work great for you. The # LCV000163273 topper you'd looked at would be a little too wide.
view full answer...
Availability of Slide-Out Awning Extending 6" Out on Each Side for 2020 Crusier RV Shadow Cruiser
Hi Jim; I'm sure there is a slide-out awning that will fit your 2020 Crusier RV Shadow Cruiser but a 6" extension on each side wont' be possible. To find the right slide-out awning you will need to measure the width of your slide-out as seen in the picture below. For example, the # LCV000163273 you were looking at fits slide-outs 57"-61" wide. The awning fabric is 61" wide so the side overhang will depend on the slide-out width. A larger awning would not fit since the arms that attach...
view full answer...
Correct Slide Topper Sizes for Three Slides, in White
Slide topper awnings are a terrific upgrade that improve the looks of your rig, Provide awning shade to reduce heat in the summer, and keep your toppers from dragging inside leaves, water, and debris! WIN, WIN, WIN! Generally, we suggest that the toppers over hang a couple of inches on the left and right for the best protection, but we still have to pick from the manufactured topper sizes. The sizes that fit best without being under sized are as follows. For your 73" wide slide use the...
view full answer...
Will A Solera Slide-Out Awning Interfere With A BAL Accu-Slide System
I spoke with Lippert and one of our installers who's put on countless slide out awnings (see video below) and both stated that there shouldn't be an issue installing the awning with your BAL Accu-Slide System as long as the awning hasn't been over-tensioned. If it has then the tension can still be lessened so you shouldn't have any issues with the awning interfering with the operation of your slide out. Since your slide out measures 59" you'll want the Solera RV Slide-Out Awning - 5'1"...
view full answer...
Overall Width of Solera Slide Topper # LCV000163273
The fabric material of the Solera 5.5' Long Slider (Slide-Topper) # LCV000163273 that you referenced is 5-1/2 feet wide.
view full answer...
Recommended Slide-Out Toppers for 2009 Crossroads Cruiser Patriot Trailer
All of our white slide-out toppers are shown on the linked page and all are 50-inches wide. Their lengths range from 5-1/2-feet up to 16-feet. You are correct that you want the topper to extend beyond the slide-out by a few inches on each side, for maximum protection from the sun's heat. For 140-1/2-inch slide-out I suggest the 12-foot model # LCV000139496. For the 42-inch the nearest size we have is the 5-1/2-foot # LCV000163273 and for the 73-inch slide-out the 6-1/2-foot Solera # LCV000163279. Solera...
view full answer...
Replacement Parts for Powered Solera Awning on 2017 Volante
Both RV and slide-out awnings and parts are shown on the linked page. Click on the type of awning you need. The awning roller/fabric assembly closest to your 61-inch dimension is part # LCV000168104 (black) or # LCV000163273 (white). These slide-out awnings measure 50-inches extended width x 66-inches tubular length.
view full answer...
What Size Slide-Out Awning Fits a 59 Inch Wide Slide-Out
If the overall width of the slide-out is 59 inches then normally you would go with a 66 inch wide awning such as # LCV000163273. At 59 inches the overhang would be 3-1/2 inches on each side. Since you have plenty of room on both sides of the slide-out you will be good to go with the 66 inch option.
view full answer...
What Slide-Awning do You Recommend for My 59-1/2" Slideout?
I reached out to my tech at Lippert, and she confirmed that for a 59-1/2 inch slideout, you need the Solera RV Slide-Out Awning - 5'1" Wide - 48" Projection # LCV000168104 (black) or the # LCV000163273 (white). Both of these models are designed to fit slideouts that measure 57" - 61" wide and up to 48" long.
view full answer...

Do you have a question about this RV Awning?

Info for this part was:

Expert Research:

Mike L

Expert Research:

Michael H

Expert Research:

Jameson C

Video Edited:

Jacob T

Video Edited:

Dustin K

Video Edited:

Chris R

Updated by:

Chelsea B

Updated by:

Shelly K

Updated by:

Wilson B

Updated by:

Kristina F

Updated by:

Mike S

Updated by:

Isabelle B

Updated by:

Amanda K

Written by:

Kristen H

Installed by:

Shane H

Video by:

Jonathan Y

Video by:

Ryan G

Test Fit:

David F

Test Fit:

Ethan H

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.