bing tracking image
  1. RV Waste Valves
  2. Valterra
  3. Single Waste Valve
  4. 1-1/2 Inch Valve Body
  5. Electric
  6. Straight Valve
Valterra E-Valve Electric Waste Valve for RV Gray Water Tank - 1-1/2" Hub to 1-1/2" Spigot
Valterra

Valterra E-Valve Electric Waste Valve for RV Gray Water Tank - 1-1/2" Hub to 1-1/2" Spigot

Part Number: VAL55MB
In Stock
$238.29
Retail:$267.50
You Save: $29.21
RV Waste Valves
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
Replace the standard waste valve on your RV's gray-water tank with this electric one so that you can open and close the valve with the flip of a switch. Light comes on when valve is open. Wiring harness and 2 switch plates included. Great Prices for the best rv waste valves from Valterra. Valterra E-Valve Electric Waste Valve for RV Gray Water Tank - 1-1/2" Hub to 1-1/2" Spigot part number VAL55MB can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (20)
  • Q & A (0)
  • Videos (1)
  • Photos

Valterra RV Waste Valves - VAL55MB

  • Single Waste Valve
  • 1-1/2 Inch Valve Body
  • Electric
  • Straight Valve
  • Valterra
  • 1-1/2 Inch Hub
  • 1-1/2 Inch Spigot
  • Stationary Valve

Replace the standard waste valve on your RV's gray-water tank with this electric one so that you can open and close the valve with the flip of a switch. Light comes on when valve is open. Wiring harness and 2 switch plates included.


Features:

  • Electric waste valve replaces or upgrades the waste valve on your RV's gray-water tank
  • Easy operation with the flip of a switch
    • Valve opens to allow flow from your gray-water tank
  • Light comes on when valve is open
  • Tool-free manual override
    • Remove pin, turn handle, and pull handle to open valve
  • High-torque, water-resistant electric motor
  • Built-in 5-amp breaker provides circuit protection
    • Resets with a push of a button - no fuses to replace
  • 1-1/2" Hub slides over your sewer pipe
  • 1-1/2" Spigot slides into your sewer pipe
  • Wiring harness, black and gray switch plates, seals, hardware, and installation instructions included
    • Switch plate installs in RV's control compartment
    • ABS solvent bond (A05-0303) sold separately for installation of valve
  • Compatible with 12V systems


Specs:

  • Passage diameter: 1-1/2"
  • Valve harness: 4' long
  • Switch harness: 3' long
  • Power draw: 2.5 amps
  • 3-Year warranty


The switch plate, wiring, seals, and hardware needed to install this electric waste valve on your RV's gray water tank are included. The switch plate installs in the RV's control panel. The waste valve secures to existing pipes using ABS solvent cement (A05-0303 - sold separately). A booklet with step-by-step instructions and a template for drilling are also included.


If you're dry camping or in the case of a power failure, the manual override is easy to use. Simply remove the pin from the valve's lift arm and turn the handle 90 degrees clockwise. Then pull the handle to open the valve.




E1001NEVP Valterra Easy Valve Electric Sewer Waste Valve System for Motorhome - 1-1/2" Hub x 1-1/2" Spigot




California residents: click here


Video of Valterra E-Valve Electric Waste Valve for RV Gray Water Tank - 1-1/2" Hub to 1-1/2" Spigot

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of Valterra RV Waste Valves - Straight Valve - VAL55MB

Hi, everyone, Steven here with etrailer.com. Today we're looking together at our Valterra E-Valve electric waste valve for your RV's graywater tanks. And this uses a 1 1/2-inch hub to 1 1/2-inch spigot connection. Now, electronic waste valves will replace or just upgrade your current waste valve on your RV's graywater tank. It does use an easy operation with the simple flip of a switch. So you're gonna have this installed.

All you'll have to do is open or close the gate valve with a simple switch. You have all your gaskets, hardware needed, the wiring with a nice plug on the end to match up to the actual gate valve with the electric motor and everything. And no need to worry, because you do have a pin here you can pull in the event that you lose power or whatnot. You can still manually open and close that valve with ease. Now, you will need sold separately some ABS solvent bond to safely and correctly install this to your pipe.

So make sure you're picking that up here at etrailer.com if you don't already have some. So again, it's an inch and 1/2 hub to an inch and 1/2 spigot on both sides of the connection point. And again, you get everything you see here included for a tool-free, manual override use whenever you need to use it. Well, folks, it does have a built-in five-amp breaker as well, so you do have circuit protection in line. So you can simply reset with the push of a button, so you don't have to worry about fuses or anything else as well.

That's gonna wrap it up for our look together. I'm Steven, have a good one.

Customer Satisfaction Score:

Ratings & Reviews

4.8

19 reviews
Replace the standard waste valve on your RV's gray-water tank with this electric one so that you can open and close the valve with the flip of a switch. Light comes on when valve is open. Wiring harness and 2 switch plates included.

by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:

It was Great everything worked as it sh ould



by:

Easy instal. Great costumer service!



by:

A bit challenging to install because of trailers tank position, hopefully it doesn't fail anytime soon because the manual lever is mid trailer.



by:

I’ve always been happy when ordering from etrailer the shipping was super fast and prices are always reasonable



by:

I couldn't believe I got this so fast. Supposed to deliver Dec 4 and it got here Dec 1.
Everything looks good but haven't installed it yet. I will give it a 5 because of the expeditious delivery and customer service.



by:

First super fast shipping!! The parts are very high quality and surprisingly actually easy install, the valve took about 15-20 I was more afraid of getting any of the gray water on me than changing the valve, but surprisingly it was super easy. The wiring being 12v with the plug and play with the auto valve was again very easy for any diy Rv owner. Highly recommend. One quick note I installed three separate auto valves one of them. The cable was about 3 feet short so if they’re not long enough, he will have to splice in three wires. Wire size in the picture bought at Lowe’s.



by:

Good service



by:



by:


19
19

See what our Experts say about this Valterra RV Waste Valves

  • What Parts Are Included In The VAL95MB Kit?
    Hey Larry, Yes, The Valterra # VAL95MB is a kit with both the # VAL35MB 3" and # VAL55MB 1-1/2" included. They kit them together for a convenient full replacement system, or we offer them both separately as well. Are you looking to get both for your trailer?
    view full answer...

Info for this part was:

Employee Steven C
Installed by:
Steven C
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Edited by:
Amanda M
Employee Cody B
Written by:
Cody B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


<