Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the EZ Coupler Cap from Valterra. This is a valve cap that fits a standard 3" waste valve. It features a built-in handle for easy operation, so it allows you to easily install it and remove it from the actual waste valve. It also features a 3/4" gray water drain. Now, this product is made from a durable plastic construction. It's clear when it comes to the coloring, it does already feature the installed seals, so it's going to ensure leak-proof connections, and it comes with two tethers to keep the caps close by, so you don't misplace them or lose them.
One right here is for the main drain cap and then the other tether is for the gray water drain cap, the 3/4" water drain.That's going to do it for today's look at the EZ Coupler Cap from Valterra.
Ratings & Reviews

Lazer S.
4/28/2026
Glad we could help, Richard! It's always funny how so small a thing can make such a difference. ^___^ What's the next trip you have planned?

Allen S.
2/9/2025
These thing are a game changer. I originally bought it because I have a hard time bending over enough to reach under for the original cap. The new caps with a handle makes it a breeze. I also added a clear 45 deg. extension on my hose, and its now easy. But, the beauty of the cap is having a 34 hose fitting, I can use a section of hose with a funnel and add lubricant to the tank valves while theyre closed or open and I dont dump it on the ground. Your funnel just has to be above the level in the tank. Easy.


Gwendolyn Y.
4/14/2025
Thanks for your kind words, Cheryl! We will always be here for you when you need us :)

Robert
9/26/2024
The transparent caps are working well and allow me to see any and how much fluid is still in the piping to allow for connection without the black or grey water shower.

James D.
5/27/2026
Sorry to hear that Donald, Parts like this with seals and gaskets can be sensitive installs. There's a few things to check: Making sure the rubber gasket is seated flat and not twisted on the coupler Not overtightening the mounting screws Check the inlet thread since leaks sometimes appear to come from the body but are actually from the connections Inspect the clear bowl carefully for hairline cracks around the threads If it's none of the above, then you could have a defective unit and we can assist with that.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




Gwendolyn Y.
6/15/2026
Hopefully you wont have any surprises turn into camping horror stories.