See what our Experts say about this Camco RV Sewer Hoses

• End Caps for RV 4 Inch x 4 Inch Square Bumper
  The Revolution RV Sewer Hose Kit w/ Swivel Fittings and Storage Caps part # CAM39625 does not come with the end caps for your RV's 4" x 4" square bumper. The end caps that are included are for the hose only. If you need the end caps for your RV's 4" x 4" square bumper then you can obtain them using the Camco Vented RV Bumper Cap w/ Tether part # CAM40324.
  view full answer...
• Will the RhinoEXTREME RV Sewer Hose Fit Inside the Valterra RV Sewer Hose Carrier
  The RhinoEXTREME RV Sewer Hoses part # CAM39867 can be stored inside the Valterra RV Sewer Hose Carrier part # A04-5094BK with all of the bayonet/lug fittings and caps attached but you will need to remove the elbow. The elbow is too large to fit inside the above and the same can be said for the Revolution RV Sewer Hose Kit part # CAM39625 as well. This is the case for most sewer hoses as the carriers and bumpers just won't fit the elbow, this needs to be stored elsewhere.
  view full answer...
• 20 Foot Long Sewer Drain Hose Kit with Clear Elbow Fitting
  For basically the same sewer hose kit as the Camco # CAM39625 but with a clear elbow fitting we have the Dominator kit part # D04-0275. This has two 10 foot long sections of hose and uses bayonet fittings as well.
  view full answer...
• Availability of 10 Lippert Waste Master RV Sewer Hose
  The Waster Master Hose is available in a 20' size part # LC359724. There is also a 20' extension available with part # LC360784. However, shorter lengths Waste Master hoses are not available. If you're open to a different brand, the following options are available in the length you want: - Easy Slip RV Sewer Hose w/ Pre-Attached Bayonet and Elbow Fittings and 4-in-1 Adapter - 10' Long # CAM39551 - Revolution RV Sewer Hose Kit w/ Swivel Fittings and Storage Caps - Brown - (2) 10' Long...
  view full answer...
• Thickness of the Hose of Revolution RV Sewer Hose Kit
  I spoke with my contact at Camco and they informed me that the thickness of the vinyl hose is 15 mm.
  view full answer...
• 1-1/2 inch Fitting to 3 inch Bayonet Fitting Adapter
  Hey Chris. The Valterra RV Sewer Termination Adapter - 3" Lug Fitting to 3" Hub item # T1029-2 and the Valterra Eccentric Tank Reducer - RV Gray Water - 3" Spigot to 1-1/2" Hub item # T1041-1 are exactly what you need to connect to the Camco Revolution RV Sewer Hose Kit w/ Swivel Fittings item # CAM39625. You'll want to use the solvent cement item # 3447530889 to complete the installation and prevent leaks. If you have any additional questions, go ahead and click on the box below that...
  view full answer...
• Available Lengths of RV Sewer Hose
  RV sewer hoses are typically all a 3-inch diameter, such as # CAM39601, # CAM39611 and part # CAM39625 which is a 2-piece hose kit with 2 swivel lug and 2 swivel bayonet fittings, a 4-in-1 adapter, and 4 storage caps. All such items are shown on the linked page. You can click on the length of hose you need. If you are unsure of the type of fittings you have you can always send along a photo or two.
  view full answer...