Valterra EZ RV Sewer Hose Carrier - 26" - White

Video Transcript for Review of Valterra RV Sewer - Hose Carrier - A04-0150

Jeff: Hello everybody. This is Jeff at etrailer.com. Today, we're going to take a look at this Valterra 26-inch long easy RV sewer hose carrier in the white color. Now, this hose carrier allows you to carry your sewer hoses, your fishing poles, or even other equipment in this nice protected tube. It is designed to keep the hoses or your other equipment out of your RV storage compartment. And this is a 26-inch long carrier.

So it will hold most 10-foot long drain hoses, except for the gray hoses. Does have this nice interlocking cap here, it's located on each end. That'll twist on and off. Has a nice easy-grip design. So it makes opening and closing the carrier very quick and easy and see you just drop it back in there, twist it and the holes will line up and you can do the same on this end.They do have small vent holes on the cap to allow the air to circulate and dry equipment that's on the inside.

And if you notice it is tethered. So when you remove the cap, the strap holds it to the tube prevents from losing the cap. And as I mentioned, you can also with the tab on there, when they line up, lock them into place, those tabs line up, you could actually put a lock through there if you want to lock your whatever you're carrying in there.This carrier you can see, comes all assembled with the mounting saddle brackets already installed. It does come with the four mounting screws. It is designed to mount to the frame of your RV.

This one is in a white color. You can also purchase it in a black color, and it's also available in three other lengths, comes in a 46-inch long, 64-inch long, and a 94-inch long length. Overall length on this from one end to the other is going to be right at 27-inches. The 26-inches would be the tube length internally. So in other words, if we took the cap out and measure the internal cap to cap on the inside, that's the 26-inch length that they're talking about.The diameter, you can go ahead and zoom in just a little bit so you can see the diameter.

When we measure that, the internal diameter it's going to be right at 4 1/2 inches, outer diameter is 5 inches. Now the mounting bracket dimensions. The bracket themselves those are going to be 6 inches long, the width on them, about 1 1/4 inch wide. The mounting hole dimensions center to center going to be about 5 1/4 inches. And the distance between the mounting brackets from the center of this mounting hole to the center of this mounting hole is going to be right at 25 3/4 inches.But again, just to show you on this side, you have your nice built-in grip or handle that you just twist it. The cap opens up, put it back just line it up, twist it. And the same on this end, just grab it, releases it, opens it up, put it back in, twist it, and it locks into place, simple as that but that should do it for the review on the Valterra, 26-inch long, easy RV sewer hose carrier in the white color.