Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
3,000-Watt inverter lets you use appliances and devices wherever the road takes you. Pure sine wave technology is perfect for sensitive electronics like HDTVs and computers. Changes your RV battery's DC output into clean AC power.
Features:
Specs:
This 24V inverter changes DC output from your RV batteries into AC power and sends it to the electrical system. Using pure sine wave technology, it creates clean power with low distortion, making it safe, efficient, and perfect for sensitive electronics like computers. Plus, the inverter can generate 6,000 starting watts and 3,000 running watts which is a great fit for larger appliances and electronics.
The inverter includes a hardwired AC terminal for AC loads, positive and negative DC input terminals that connect to your batteries, and a port for a fixed-mount remote (sold separately). It has a function switch that lets you select different output voltages (100V, 110V, 115V, and 120V) and frequencies (50Hz and 60Hz). This switch can also turn the power saver on and off. Additionally, the power saving adjustment dial near the function switch sets the input and wake up thresholds for the power saver.
The system includes a number of safety features. It offers protection from over/under voltage, overloading, and overcurrent. The inverter also uses a heat sink process to protect from extreme temperatures, and an internal cooling fan removes excess heat from the unit.
For additional safety, installing a fuse between the battery bank and the inverter will protect your equipment from power surges. The Go Power 200-amp fuse block (sold separately) works with this unit and uses a slow blow time-delay feature to withstand surge current. This means it can handle short surges over 200 amps without blowing the fuse, which is great for devices with motors that require more energy to start.
The inverter mounts inside your RV in a dry location with ventilation. It should be installed in close proximity to the battery bank, but not in the same compartment. The DC terminals are wired to the battery bank. There are several ways to connect the inverter to your RV's electrical system, but this will depend on your rig and how you want to use your inverter.
There are 2 fixed-mount remotes (sold separately) that let you monitor and control the inverter from inside your RV.
For a simple, no-frills option, the Go Power GP-SWR-A Inverter Remote lets you turn your inverter on and off from inside your RV. It also has a LED which indicates the inverter's status.
For additional features, the Go Power GP-ISW-R-24 Inverter Remote provides LED indicators that display the voltage, output power, inverter status, power saving mode status, and fault conditions. It also has a power button that controls the inverter.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Go Power 24 volt, 3,000 watt industrial pure sine wave inverter. Now this 3,000 watt industrial pure sine wave inverter will provide AC power for electronics and appliances. Basically, it'll change your battery's DC output and to clean AC power and send it to your RV's electrical system. It uses pure sine wave technology, which will provided a nice clean power and low distortion, replicates your household AC power, and allows you to run and see devices safely and efficiently, including sensitive electronics. Has a function switch on this end. This will let you select different voltages and frequencies, controls the power saving mode.
Right next to it, there's a little hole with a screw in there. That's a power saving adjustment dial that will set the input and wake up power thresholds. And right below it you'll see three led lights.These led indicators will show input voltage level, output load level, and fault conditions. This does offer built in safety features to protect your RVs electrical system. Has current protection for over and under voltage, for short circuiting, overloading, and over and under temperatures.
On this end, it has a cooling fan which will control the temperature of the inverter and remove excess heat out of the unit that can be generated by this unit.It does have multiple connection points to let you secure cables and external devices to the inverter. It includes a hardwire AC output terminal right here. On the other end, has your DC input terminals, and make your connections, and it has a remote port right up here. Now they do also offer a fixed mount remote, which we sell separately on our website. This'll let you monitor and control the inverter from inside your RV.That's part number 34280231, and they also have a fuse block installation kit.
Again, it's sold separately. This will let you safely connect the inverter to your RV battery, protects your electrical system during power use. And again, it's sold separately. It's part number 324GPDCKIT3.Few specs on this again, it's application is 24 volt battery systems. Rated power on this unit, running rated power output is 3,000 watts.
Starting surge power output is 6,000 watts. Voltage, maximum power is 24 volts DC. Input is 21 to 33 volts DC. Output is 100 to 120 volts AC. Temperature ranges. Operating range for this unit is a negative four degrees Fahrenheit to 104 degrees Fahrenheit. Storage range is negative 22 degrees Fahrenheit up to 158 degrees Fahrenheit. Does include everything I laid out here on the table. The inverter itself, the two ring lugs that make your DC connections right over here, and the DC terminal covers. In other words, once you make your connections like that, you do want to have these covers. There's a black and a red one. You match them up to the colors over here. And those would install over your DC connections. Has the screws to attach them. And with your ring lugs in there making a connection, it'll help keep it from any shorting out.Also comes with this nice user's manual that they'll describe how to install everything and how it operates. A few dimensions on this. The overall length, 17 and three eighths inches long. The width on it, 10 and one sixteenths inches wide. And the height on it is six and a quarter inches tall. The weight on this unit is only about 18 pounds.But that should do it for the review on the Go Power 24 volt, 3,000 watt industrial pure sine wave inverter.
Ratings & Reviews
Gwendolyn Y.
4/21/2025
That's quite the set up you got, Scott! I also wanted to mention how great of an idea it is to label when each part was installed. I imagine it helps with anything in the future down the road.
Danronics
7/19/2022
Perfectly
Steve
11/1/2022
I finally got the inverter installed. I had to mount it in the basement area from the ceiling. The install was difficult, but overall it went well. A tip: If you order the installation kit fuse and cables you will need to modify the cables. Because of the relative stiffness of these cables must be exact length. I had to make a short cable from the fuse to the inverter, and separate cables from the batteries to terminal blocks on the side wall. This required additional purchase of 40 crimper and lugs. Also had to buy the terminal blocks plus additional 6-3 AC cable and rewire of my main panel. I have now put the trailer away for the winter and not really able to test it fully, but it does seem to work. I would love to show pictures, but I dont have an upload option available.
John E.
7/11/2022
Ive used it for a year now on multiple road trips - it is a good product except for terminal locations
Roy
4/11/2021
After a year our ic3000 GoPower inverter has been amazing.
Scott H.
3/4/2022
The inverter is still working great. The 1500 watt inverter will run my 1620 watt microwave. The internal parts of the inverter are top notch. Just had the one problem intially with the cheap plastic case.
Johnathan
8/28/2023
My fridge has been working non-stop for over a year! I run it 247 as my main fridge. It is powered by the pure sine wave inverter bought around the same time.
Jenny N.
8/28/2023
I reached out to the manufacturer about the experience that you are having with the inverter. They advised that when the RV is connected to shore power the charge function should be on. It will always start to charge when shore power is applied. It can be stopped from charging by pressing the charger on[off button. You had mentioned that you had changed the power save mode to 15 minutes from the default. Did you change the search watts to 15 amps? Can you give more details as to what setting you changed?
James
6/2/2022
After a full year using this and I still love it. What I really love is that it also boosts voltage during voltage s and when my ems s out for low voltage.
Do you have a question about this Power Inverter?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thomas M.
1/13/2022
I spoke to my contact at Valterra-Go Power, he told me the Remote for Go Power Pure Sine Wave Inverters - 150 to 3,000 Watt - 12V and 24V Item # 34266886 and the Remote for Go Power Industrial Pure Sine Wave Inverter - 200 to 3,000 Watt - 24V Item # 34280231 will both work with the Go Power Industrial Pure Sine Wave Inverter - 3,000 Watt - 24V Item # 34279953.
Helpful Links
Accessories-and-PartsGo-Power34266886.html
Accessories-and-PartsGo-Power34280231.html