To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Custom fit kit lets you mount Rhino-Rack RC or RV series legs to a vehicle with fixed mounting points. Legs mount to vehicle with attachment studs. Molded inserts cover bases when the legs are removed. Includes 4 pads, covers, and mounting hardware.
Features:
Specs:
Ratings & Reviews
Custom RCP Fit Kit was perfect for my 2018 Chevy Bolt. Screws fit perfectly in the predrilled holes on the Bolt's pVery solid and holds my 80 lb tandem kayak mounted upside down on my rhino rack cross bars with 2 tie down straps over the kayak, and a front strap attached to a loop strap held in pace by the hood. I attached the rear strap to my bike rack trailer hitch. Maiden voyage this past weekend to a spring run 45 minutes from home. Kayak didn't even budge an inch. Rubber on the surface of my rhino racks prevented any slippage.
The Rhino rack for my Rav4 hybrid fit perfectly and has been used extensively for carrying whitewater and touring kayaks since installing it one year ago.
etrailer videos were helpful while I shopped for alternatives to Thule and Yakima which did not offer the specific feet I needed to install their racks.
Update to my review: etrailer sent additional strips to set into the gaps on the bottom side of the rails and there is no longer any whistling, so I've rerated my purchase to Excellent. I'm not sure if the strips for the bottom side (the side that faces the roof of the car) should have come with my rails to begin with or if they need to be purchased separately (etrailer sent them to me at no charge after my initial review). Covering those gaps with duct tape will also do the trick.
I purchased the Rhino Rack roof rack as an alternative to the factory installed products and the more popular Thule and Yakima brands. The Rhino Rack is solid and sleek and is largely silent while driving (if I have the roof open you can hear a soft whistle). Not only does the rack look fantastic, but the non-slip top and the strong bars make carrying things on top a real pleasure.
Two stars because the provided hardware interferes with the factory rails when using the provided cover plates (to be installed when you remove the cross bars & towers). Had to source my own 12mm long cap screws because provided 16mm were too long. Otherwise works as advertised.
Solid brackets and easy to install. Fit 2021 Sprinter with factory rails.
Product arrived earlier than expected with all parts. A little work to install but everything fits perfectly. After I dry fit the parts and then tightened the sliders to the cross bars I attached the rack to the mounting brackets on the roof using a 10mm wrench. It was easier access than trying to use the allen head wrench. It's on with a solid fit and I love it.
Looks amazing, and was super easy to install.
2021 Jeep Grand Cherokee L 4x4 Limited
Terrible hardware. Screws broke inside fixed mounts twice rendering while system completely useless
Fitment is good, did not come with security capscrews even it included a security wrench. The rack can be removed with allen wrench.
When rack is in place, I cannot use the sunroof on 2023 Buick Enclave.
Otherwise, it works fine!
Price, Quality, communication, Shipping Speed. Everything about this is excellent!
Well made parts, shipped quickly. I was able to install the rack with no problems by following the instructions. Good choice if you want a quality roof rack for $xxx less than a comparable Thule or Yakima.
Item arrived on time.
Love etrailer. They always have anything and everything you need and always at a great price. Also great videos and tutorials to help with your DIY install! Salvaged my old Rhino Aerobars with a new Rhino roof kit from etrailer for my Bolt.
I AM SO PLEASED W/MY PURCHASE AND THANKS TO ETRAILER THE WHOLE PROCESS OF SELECTING WAS MADE EFFORTLESS W/THE STAFF ONLINE AS WELL AS VIA PHONE.
THE VIDEOS ARE INCREDIBLY USEFUL AND SO PRECISE AS TO INSTALLATION AND IN HELPING TO CHOOSE THE CORRECT ITEM FOR THE PARTICULAR AUTO DRIVEN. THE REPRESENTIVE, NICOLE WAS VERY KNOWLEDGEABLE AND SO CONCERNED TO GIVE YOU THE BEST SERVICE POSSIBLE. ETRAILER...PROFESSIONAL....TOP VALUE....A PLEASURE TO DO BUSINESS WITH.
Great item, pretty easy to install. I posted a longer review for the full setup on our 2019 Highlander with 2 biggish kayaks under reviews for the rack pillars, Item: RRRCL4. When fully tied down, we used hood loops front and rear for both boats.
Great service from Carol C.
I searched a lot of websites before finding what I needed on etrailer.com for my 2012 Suzuki GV. I was looking for the proper mounts to install a Kayak rack system. Because my vehicle has a built in rail system it was very confusing what was needed. Thank you etrailer for hooking me up with the appropriate parts for the Rhino system, it worked great!
These Rhino-Rack products are solid. Installation was quite simple. It took me no more than 2 hours from taking off the OEM rails to getting the crossbars to tighten down.
Keep in mind that these legs were designed for the Toyota Prado (it even says so on the installation guide). Once you remove the Lexus OEM rails, you will notice a groove, about 3/4" deep and 1-1/8" wide, alongside the roof. If your GX does not come with the OEM rails, the grooves might already be covered up by the factory drip trim pieces (Toyota PN 75557-60050, 75555-60030). This Rhino rack kit does not come with any hardware to cover up the grooves. I was told they would not cause any leaks because the mounting points are tightly sealed.
But if you have severe OCD like me, those grooves will be bothering you (even though you can't see them). Instead of paying over $xxx for the OEM trims pieces. Fill them up with some 3/4"wide 3/8 inch thick insulation tape, then tape a strip of 1" wide, 1/8" thick neoprene rubber strip on top. The end product looks just like OEM. I hope my simple idea will help other fellow OCD survivors.
We had been shopping around for roof options for our new 2022 grand Cherokee, when we came across this. For us, the OEM mopar crossbars were ugly - extend about 6 inches from the roof. These are very low profile, and insanely sturdy. Additionally, installation is crazy simple.
The only recommendation we have that differs from the instructions - we used the rear set of mounting holes on the factory rails. Using the front set of holes as recommended by the instructions for cross bars meant that ski racks would be too close together, and the ski bindings would not fit. Other than that, very satisfied!
Everything came promptly, no issues. Everything fit and the videos from eTrailer are a great help!
Purchase for a 2019 Jeep Grand Cherokee, black rails. Perfect fit.
Working great to mount my crossbars and kayak rack.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.