Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces (1) 12" round footpad with installation hardware for your Lippert hydraulic RV landing gear.
Features:
Fits:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Lippert replacement foot pad kit. This is going to replace one round foot pad on your Lippert hydraulic landing gear. This will work for any of the Lippert hydraulic RV landing gear that require a 12-inch diameter foot pad. And as you can see, this is a 12-inch diameter foot pad here. So it is going to be a great option for you, because this is a direct replacement from Lippert, and you can trust it is gonna be exactly what you need.
You're not going to need to worry about fit issues or compatibility problems. They do include the mounting bolt, washer, and O-rings with your foot pad here. So if you are needing to replace one of those 12-inch diameter foot pads, this is gonna be exactly what you need. That's gonna complete our look for today. Again, I'm Michael with etrailer.com.
Thanks for watching..
The standard 9” landing feet crumple under the weight of a diesel pusher motorhome’s rear weight. These were an absolute necessity to distribute the weight over a larger area and prevent crumpling jack feet pads.
After one year this is holding up great and I can highly recommend these! We were previously bending the 9” diameter foot repeatedly on our Class A motorhome and losing several SnapPads. After checking on several RV forums, we upgraded to the 12” diameter foot which provides more ground contact to distribute weight and is also thicker material so not as prone to bend. Still holding strong!
The replacement foot for our 5th wheel fits perfectly and was half the price the dealership wanted to charge us. Delivery was made in a very timely manner.
Will bend unless using snap pads. With snap pads it is perfect
Easy to replace!
Easy change out. Get some Blue Loctite for your installation. 2018 Thor Aria 3901
Thomas
9/14/2024
We are extremely happy with the 12 pads for our coach! We had 9that cupped after a couple of trips. One year and zero bends.
Fast delivery. Quality products.
Received the foot in time for your jour ney
Good quality product, fit well.
I wanted to install Snap Pads but since all 4 footpads were mushroom shaped I knew that would be impossible, so replaced all 4. Installation was easy, to torque the mounting bolt to 132ft/lbs it was necessary to drop a screwdriver through one of the small holes in the foot so it would jam against the frame. None of original bolt were more than about 10 lbs torque so I wonder if they were torqued at the factory.
Also increased the original 9" front feet with 12". The fronts were the most mushroom shaped and hopefully the larger foot pads will support the weight better. There was no clearance issues with my Thor Tuscany.
Regarding shipping, one of the boxes was opened when received, everything was still there but I hate receiving packages that were opened during shipping.
Rich
4/3/2023
The Snap Pads & footpads have held up well, no deformation and the Snap Pads have remained secure. When I installed the Snap Pads I sprayed the interior and bottom of the feet with spray Flex Seal, this worked both as a lubricant for installation and to secure them in place. After installation I sprayed the tops of the feet to reduce the chances for rusting. So far this has worked great.
Great product
Love it. The 12" diameter is a major improvement over the 9" when it comes to not sinking into soft soil.
Excellent service by Kurt and others at etrailer. I finally got the right jack feet on my Tiffin Phaeton. Thanks for all the help.
Service incroyable
Purchased these 12" jack feet to replace the undersized 9" feet that REV provided on our Holiday Rambler 40' Armada. The stock rear 9" feet bent almost immediately when using on gravel. I replaced them with these 12" feet but will not take a chance on them bending so I use jack pads under the jack feet now when parked on any surface except concrete..
It will fit perfect, much better than the original 9” pads which I upgraded and then lost one on my last travel.
I bought 12 foot plates for my class A motor home with the matching snap plate pads and both were extremely easy to install. No more getting on your knees to place the pads under the jacks. My wife is very happy.
Easy to order and find what you need on the website. Product delivered in a timely manner. Will be installing weekend of 10/22/2022. The foot pads seem to be very well made, I will know more once installed and put to use. I have ordered several things this past year from E-trailer with no issues. Good company
Item arrived late, in a damaged box with missing parts. I have contacted service for a return and haven't been provided with a return label as yet. Responses have been poor since my first contact and nothing has been done to resolve the issue
Fast shipping.
Robert
9/4/2023
They seem to be stronger than the original pads. No complaints
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
David L.
3/24/2025
Still straight and not bent one year later