Video Transcript for Review of Meyer Snow Plow Parts - Replacement Hydraulic Fluid Reservoir Tank - ME59BR

Hi everyone. Steve here with etrailer. Today we're taking a quick look at our Replacement Hydraulic Fluid Reservoir Tank for the Meyer HomePlow Power Angling Snowplows. Folks, this fits models numbers 26000 and 26500, specifically. So make sure you have those specific home plow models. Now, as you know, the hydraulic fluid will go into this reservoir and this will help hold the fluid.

And then obviously your connections are gonna be screwed in here and everything for using it. It's a nice hard plastic construction. They do give you a nice O-ring here with the packaging. And again, I gave you the models this fits, but some people do like the measurements, so I'll go ahead and run through them real quick as well. Inside to inside on this opening looks like it's right about 3-1/4.

Outside to outside, 3-3/8ths. Keep in mind, this is a molded plastic. So obviously those could be a little different depending on, you know, how it came out of the mold. I got about 5-1/2 inches this way, and about 4-3/4 this way. And then as far as the height of just the tank, not including the top there, I'd say right about 3-7/8ths, give or take an eighth of an inch.

So again, folks, rough measurements. This is again, one quantity one, made here in the U.S. Replacement Hydraulic Fluid Reservoir Tank for those Meyer HomePlow Power Angling Snowplows. I'm Steven. Thanks for watching.

.