Video Transcript for Review of MORryde Jeep Storage - Jerry Can Mount - MR87UR

Hello neighbors, Steven here with etrailer.com. Let's take a look together at our MORryde jerry can mount for your Jeep Wrangler JL, specifically the passenger side. Now folks, this is a custom fit application. You wanna make sure it's gonna fit your JL Wrangler, so make sure you're typing in your year make and model on our homepage where it says my vehicle information to be sure you're getting the right parts the first time and information like submodels, 4x4 et cetera. Be sure you're getting the right parts. Now this double jerry can mount with the tray is gonna maximize the storage space inside your Jeep by letting you transport fuel behind that passenger fender.

Now ill throw up an image of what this looks like installed. Keep in mind on this image, it's on the driver's side. In other countries they have the steering on the opposite side, so that's potentially what you may be seeing or it's an invert image, but I can rest assured to you this one that we're looking at today is for the passenger side only. Now this is compatible with the RotopaX fuel mounting panels, that would be sold separately. This ratchet strap here on the table, let me zoom in for a better look at that.

This is what's gonna hold the jerry can in place. It's got metal tie down points here on the end of this webbing, and the strap again is ratcheting, making it very easy to tighten up over the jerry can. You get a nice hard kind of plastic rubberized material for underneath the jerry can up in the tray. All the hardware you see before you, and you're gonna be utilizing your factory hardware on the Jeep's preexisting hole, so you shouldn't have to do any kind of drilling whatsoever. It's a simple bolt-on installation right behind the passenger side fender.

Now this unit is rugged black powdercoated steel. It's gonna withstand all the elements. You kind of see it from the side there. And a quick view of the back. I've just got two bolts holding this together for now.

It's got welded on nuts already on the other side, so it's not going to touch or go deep enough to mess with your Jeep's exterior. And the parts that are using your Jeep's holes are gonna be the top and the bottom ones primarily. And two of those are behind this panel. So you'll mount the long piece first per the instructions, and then this will get bolted right to it. So read the instructions and you'll have no problem installing it. Now this is compatible with the five gallon metal military spec, scepter and natal style jerry cans. As far as some dimensions, the tray itself is 14-1/4 inches wide. It's about 10 inches tall from the side and 7-1/4 inches deep on the inside. Now overall for the whole unit, I was getting 28-11/16 inches tall overall by about 11-3/8 inches deep. Again, folks, just a nice MORryde jerry can mount for your Jeep Wrangler JL on the passenger side only. I'm Steven, thanks for watching.